Skip to content

Instantly share code, notes, and snippets.

@qosmio

qosmio/r7800 5.15 NSS build

Created September 7, 2022 10:49
Show Gist options
  • Save qosmio/98fbe58d1b83ad9563b75ced20e982ab to your computer and use it in GitHub Desktop.
Save qosmio/98fbe58d1b83ad9563b75ced20e982ab to your computer and use it in GitHub Desktop.
Download ZIP
Boot log for NSS build for r7800 on 5.15
Raw
r7800 5.15 NSS build
Loading: T T T #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#############################################
done
Bytes transferred = 21641658 (14a39ba hex)
Image Name: ARM OpenWrt Linux-5.15.65
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 21641594 Bytes = 20.6 MiB
Load Address: 43208000
Entry Point: 43208000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
mtdparts variable not set, see 'help mtdparts'
no partitions defined
defaults:
mtdids : nand0=msm_nand
mtdparts: none
info: "mtdparts" not set
Using machid 0x136c from environment
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.15.65 (xbmc@htpc) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 12.2.0 r20352+315-ea7b3e301d) 12.2.0, GNU ld (GNU Binutils) 2.38) #0 SMP Wed Sep 7 10:17:41 2022
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000042000000-0x000000005fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000042000000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000042000000-0x000000005fffffff]
[ 0.000000] percpu: Embedded 16 pages/cpu s32844 r8192 d24500 u65536
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line:
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 454868K/491520K available (7716K kernel code, 884K rwdata, 1852K rodata, 18432K init, 245K bss, 36652K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 26585 entries in 78 pages
[ 0.000000] ftrace: allocated 78 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000001] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000025] Switching to timer-based delay loop, resolution 160ns
[ 0.000362] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000397] pid_max: default: 32768 minimum: 301
[ 0.000588] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000616] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001392] CPU: Testing write buffer coherency: ok
[ 0.001697] qcom_scm: convention: smc legacy
[ 0.002818] Setting up static identity map for 0x42300000 - 0x42300060
[ 0.003004] rcu: Hierarchical SRCU implementation.
[ 0.003953] smp: Bringing up secondary CPUs ...
[ 0.005962] smp: Brought up 1 node, 2 CPUs
[ 0.005990] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.006008] CPU: All CPU(s) started in SVC mode.
[ 0.018476] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.018646] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.018686] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.018796] pinctrl core: initialized pinctrl subsystem
[ 0.020556] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.020976] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.022377] thermal_sys: Registered thermal governor 'step_wise'
[ 0.024408] cpuidle: using governor ladder
[ 0.024486] cpuidle: using governor menu
[ 0.047845] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[ 0.084673] s1a: Bringing 0uV into 1050000-1050000uV
[ 0.084924] s1a: supplied by regulator-dummy
[ 0.085091] s1b: Bringing 0uV into 1050000-1050000uV
[ 0.085325] s1b: supplied by regulator-dummy
[ 0.085478] s2a: Bringing 0uV into 775000-775000uV
[ 0.085703] s2a: supplied by regulator-dummy
[ 0.085862] s2b: Bringing 0uV into 775000-775000uV
[ 0.086079] s2b: supplied by regulator-dummy
[ 0.086728] usbcore: registered new interface driver usbfs
[ 0.086801] usbcore: registered new interface driver hub
[ 0.086869] usbcore: registered new device driver usb
[ 0.086926] pps_core: LinuxPPS API ver. 1 registered
[ 0.086941] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.086973] PTP clock support registered
[ 0.089181] clocksource: Switched to clocksource dg_timer
[ 0.155765] NET: Registered PF_INET protocol family
[ 0.156005] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.156905] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.156944] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.156975] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.157080] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.157143] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.157229] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.157263] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.157487] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.157541] PCI: CLS 0 bytes, default 64
[ 0.158652] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.163139] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.163158] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.276637] qcom-pcie 1b500000.pci: supply vdda not found, using dummy regulator
[ 0.276866] qcom-pcie 1b500000.pci: supply vdda_phy not found, using dummy regulator
[ 0.276980] qcom-pcie 1b500000.pci: supply vdda_refclk not found, using dummy regulator
[ 0.277258] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[ 0.277348] qcom-pcie 1b500000.pci: IO 0x000fe00000..0x000fe0ffff -> 0x000fe00000
[ 0.277392] qcom-pcie 1b500000.pci: MEM 0x0008000000..0x000fdfffff -> 0x0008000000
[ 0.401316] qcom-pcie 1b500000.pci: iATU unroll: disabled
[ 0.401346] qcom-pcie 1b500000.pci: Detected iATU regions: 8 outbound, 8 inbound
[ 0.499893] qcom-pcie 1b500000.pci: Link up
[ 0.500080] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.500104] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.500129] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xfe00000-0xfe0ffff])
[ 0.500150] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.500228] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.500360] pci 0000:00:00.0: supports D1
[ 0.500378] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.504126] PCI: bus0: Fast back to back transfers disabled
[ 0.504511] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.504694] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.505502] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.509613] PCI: bus1: Fast back to back transfers disabled
[ 0.509707] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.509737] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.509836] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.509860] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.510676] pcieport 0000:00:00.0: AER: enabled with IRQ 48
[ 0.511664] qcom-pcie 1b700000.pci: supply vdda not found, using dummy regulator
[ 0.511874] qcom-pcie 1b700000.pci: supply vdda_phy not found, using dummy regulator
[ 0.511979] qcom-pcie 1b700000.pci: supply vdda_refclk not found, using dummy regulator
[ 0.512228] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[ 0.512316] qcom-pcie 1b700000.pci: IO 0x0031e00000..0x0031e0ffff -> 0x0031e00000
[ 0.512357] qcom-pcie 1b700000.pci: MEM 0x002e000000..0x0031dfffff -> 0x002e000000
[ 0.631768] qcom-pcie 1b700000.pci: iATU unroll: disabled
[ 0.631798] qcom-pcie 1b700000.pci: Detected iATU regions: 8 outbound, 8 inbound
[ 0.732488] qcom-pcie 1b700000.pci: Link up
[ 0.732677] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.732700] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.732732] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x31e00000-0x31e0ffff])
[ 0.732753] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.732826] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.732968] pci 0001:00:00.0: supports D1
[ 0.732986] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.736752] PCI: bus0: Fast back to back transfers disabled
[ 0.737135] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.737330] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.738208] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.738497] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 0.742357] PCI: bus1: Fast back to back transfers disabled
[ 0.742449] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.742480] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.742587] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.742613] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.743413] pcieport 0001:00:00.0: AER: enabled with IRQ 50
[ 0.746713] L2 @ QSB rate. Forcing new rate.
[ 0.746954] L2 @ 384000 KHz
[ 0.747157] CPU0 @ 800000 KHz
[ 0.747180] CPU1 @ QSB rate. Forcing new rate.
[ 0.747323] CPU1 @ 384000 KHz
[ 0.751744] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.753676] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.754515] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.754575] msm_serial 16340000.serial: uartclk = 7372800
[ 0.754638] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 51, base_baud = 460800) is a MSM
[ 0.754685] msm_serial: console setup on port #0
[ 1.670764] printk: console [ttyMSM0] enabled
[ 1.675900] msm_serial: driver initialized
[ 1.684905] loop: module loaded
[ 1.686441] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xa1
[ 1.686865] nand: Micron MT29F1G08ABBEAH4
[ 1.693548] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.697473] 8 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.704988] OF: Bad cell count for /soc/nand-controller@1ac00000/nand@0/partitions
[ 1.711820] OF: Bad cell count for /soc/nand-controller@1ac00000/nand@0/partitions
[ 1.720027] Creating 8 MTD partitions on "qcom_nand.0":
[ 1.726710] 0x000000000000-0x000000c80000 : "qcadata"
[ 1.751084] 0x000000c80000-0x000001180000 : "APPSBL"
[ 1.759074] 0x000001180000-0x000001200000 : "APPSBLENV"
[ 1.760363] 0x000001200000-0x000001340000 : "art"
[ 1.765482] 0x000001340000-0x000001480000 : "artbak"
[ 1.770464] 0x000001480000-0x000001880000 : "kernel"
[ 1.779442] 0x000001880000-0x000007900000 : "ubi"
[ 1.926299] 0x000007900000-0x000008000000 : "reserve"
[ 3.631613] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
[ 4.528740] ar8327: qca,phy-rgmii-en is not specified
[ 4.529948] i2c_dev: i2c /dev entries driver
[ 4.539934] sdhci: Secure Digital Host Controller Interface driver
[ 4.539972] sdhci: Copyright(c) Pierre Ossman
[ 4.545011] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.551964] NET: Registered PF_INET6 protocol family
[ 4.556607] Segment Routing with IPv6
[ 4.560248] In-situ OAM (IOAM) with IPv6
[ 4.563767] NET: Registered PF_PACKET protocol family
[ 4.567785] Bridge firewalling registered
[ 4.573279] l2tp_core: L2TP core driver, V2.0
[ 4.576608] l2tp_netlink: L2TP netlink interface
[ 4.581108] 8021q: 802.1Q VLAN Support v1.8
[ 4.585678] Registering SWP/SWPB emulation handler
[ 4.629604] thermal thermal_zone0: failed to read out thermal zone (-110)
[ 4.641891] UBI: auto-attach mtd6
[ 4.641931] ubi0: attaching mtd6
[ 4.802692] random: crng init done
[ 5.517627] ubi0: scanning is finished
[ 5.529685] ubi0: attached mtd6 (name "ubi", size 96 MiB)
[ 5.529721] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.534068] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.540961] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.547696] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
[ 5.554555] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 5.560802] ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1658436909
[ 5.567752] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
[ 5.577235] ubi0: background thread "ubi_bgt0d" started, PID 80
[ 5.578233] block ubiblock0_0: created from ubi0:0(rootfó[ 5.609604] Freeing unused kernel image (initmem) memory: 18432K
[ 5.629772] Run /init as init process
[ 6.834031] init: Console is alive
[ 6.834313] init: - watchdog -
[ 6.836477] init: Watchdog has previously reset the system
[ 6.873389] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.921511] pstore: Using crash dump compression: deflate
[ 6.921556] pstore: Registered ramoops as persistent store backend
[ 6.925900] ramoops: using 0x40000@0x42100000, ecc: 0
[ 6.936477] **********************************************************
[ 6.937098] * Driver :NSS GMAC Driver - RTL v(3.72a)
[ 6.943612] * Version :1.0
[ 6.948637] * Copyright :Copyright (c) 2013-2018 The Linux Foundation. All rights reserved.
[ 6.951882] **********************************************************
[ 7.007814] nss_driver - fw of size 544712 bytes copied to load addr: 40000000, nss_id : 0
[ 7.008258] nss_driver - Turbo Support 1
[ 7.015051] Supported Frequencies -
[ 7.015056] 800Mhz
[ 7.019135] 800Mhz
[ 7.022775] 800Mhz
[ 7.024514]
[ 7.028899] bf229bc0: meminfo init succeed
[ 7.042146] nss_driver - fw of size 218860 bytes copied to load addr: 40800000, nss_id : 1
[ 7.042387] bf22e500: meminfo init succeed
[ 7.049363] debugfs: Directory 'dynamic_if' with parent 'stats' already present!
[ 7.053566] debugfs: File 'n2h' in directory 'strings' already present!
[ 7.061089] debugfs: File 'drv' in directory 'strings' already present!
[ 7.067364] debugfs: File 'c2c_tx' in directory 'strings' already present!
[ 7.074007] debugfs: File 'c2c_rx' in directory 'strings' already present!
[ 7.082008] node size 1 # items 2
[ 7.087249] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.087760] memory: 0 0 (avl 612732928) items 2 active_cores 2
[ 7.087785] addr/size storage words 1 1 # words 2 in DTS, ddr size 1000000
[ 7.087800] bf229bc0: nss core 0 booted successfully
[ 7.087926] node size 1 # items 2
[ 7.106041] SCSI subsystem initialized
[ 7.110315] memory: 0 0 (avl 612732928) items 2 active_cores 2
[ 7.110352] addr/size storage words 1 1 # words 2 in DTS, ddr size 1000000
[ 7.110367] bf22e500: nss core 1 booted successfully
[ 7.137406] ahci 29000000.sata: supply ahci not found, using dummy regulator
[ 7.140213] ahci 29000000.sata: supply phy not found, using dummy regulator
[ 7.147230] ahci 29000000.sata: supply target not found, using dummy regulator
[ 7.154192] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 7.161116] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 7.166496] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 7.175781] scsi host0: ahci
[ 7.183589] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 32
[ 7.511790] ata1: SATA link down (SStatus 0 SControl 300)
[ 7.517846] ehci-fsl: Freescale EHCI Host controller driver
[ 7.520077] ehci-platform: EHCI generic platform driver
[ 7.531715] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.532861] ohci-platform: OHCI generic platform driver
[ 7.686639] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 7.686719] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 7.691357] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 7.698664] xhci-hcd xhci-hcd.0.auto: irq 55, io mem 0x10000000
[ 7.708374] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 7.713949] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 7.719510] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 7.728020] hub 1-0:1.0: USB hub found
[ 7.733714] hub 1-0:1.0: 1 port detected
[ 7.738106] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.742643] hub 2-0:1.0: USB hub found
[ 7.749535] hub 2-0:1.0: 1 port detected
[ 7.753293] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 7.757099] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 7.762601] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 7.770029] xhci-hcd xhci-hcd.1.auto: irq 56, io mem 0x11000000
[ 7.779461] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 7.785218] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 7.790843] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 7.798736] hub 3-0:1.0: USB hub found
[ 7.805033] hub 3-0:1.0: 1 port detected
[ 7.808890] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.813393] hub 4-0:1.0: USB hub found
[ 7.820886] hub 4-0:1.0: 1 port detected
[ 7.827670] usbcore: registered new interface driver usb-storage
[ 7.828630] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 7.838617] init: - preinit -
[ 8.451327] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 8.485731] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 8.486959] scsi host1: usb-storage 4-1:1.0
[ 9.017257] ipq8064-mdio 37000000.mdio eth1: 1000 Mbps Full Duplex
[ 9.541235] scsi 1:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 9.544438] sd 1:0:0:0: [sda] 30375936 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 9.550009] sd 1:0:0:0: [sda] Write Protect is off
[ 9.557127] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 9.585553] sda: sda1
[ 9.588320] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 10.101482] ipq8064-mdio 37000000.mdio eth1: nss_gmac_change_mtu: Enabling Normal Frame MTU (Requested MTU [1500])
[ 10.101563] ipq8064-mdio 37000000.mdio eth1: nss_gmac_change_mtu: Enabling Jumbo Frame MTU for eth1 (Requested MTU [1500])
[ 10.113811] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 10.123086] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.1: link becomes ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 12.330370] procd: - early -
[ 12.330696] procd: - watchdog -
[ 12.332609] procd: Watchdog has previously reset the system
[ 12.980640] procd: - watchdog -
[ 12.980979] procd: Watchdog has previously reset the system
[ 12.983703] procd: - ubus -
[ 13.046607] procd: - init -
Please press Enter to activate this console.
[ 13.309889] urngd: v1.0.2 started.
[ 13.423608] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.445985] NET: Registered PF_KEY protocol family
[ 13.449630] Initializing XFRM netlink socket
[ 13.463571] gre: GRE over IPv4 demultiplexor driver
[ 13.465096] ip_gre: GRE over IPv4 tunneling driver
[ 13.476208] QCA multicast snooping installed successfully
[ 13.512745] GACT probability on
[ 13.513735] Mirror/redirect action on
[ 13.521765] u32 classifier
[ 13.521790] input device check on
[ 13.523421] Actions configured
[ 13.536536] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
[ 13.536569] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
[ 13.592022] IPsec XFRM device driver
[ 13.677546] PPP generic driver version 2.4.2
[ 13.678846] NET: Registered PF_PPPOX protocol family
[ 13.683056] PPTP driver version 0.8.5
[ 13.689852] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 13.689883] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
[ 13.733194] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x46.
[ 13.733743] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 13.740663] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 13.900875] ath10k_pci 0000:01:00.0: fwcfg key: vdevs val: 8
[ 13.900923] ath10k_pci 0000:01:00.0: fwcfg key: peers val: 80
[ 13.905655] ath10k_pci 0000:01:00.0: fwcfg key: active_peers val: 80
[ 13.911462] ath10k_pci 0000:01:00.0: fwcfg key: stations val: 80
[ 13.918395] ath10k_pci 0000:01:00.0: fwcfg key: rate_ctrl_objs val: 7
[ 13.924053] ath10k_pci 0000:01:00.0: fwcfg key: regdom val: 710
[ 13.930564] ath10k_pci 0000:01:00.0: fwcfg key: fwname val: firmware-5.bin
[ 13.936558] ath10k_pci 0000:01:00.0: fwcfg key: fwver val: 5
[ 13.943444] ath10k_pci 0000:01:00.0: fwcfg key: nohwcrypt val: 0
[ 13.949158] ath10k_pci 0000:01:00.0: fwcfg key: ct_sta_mode val: 0
[ 13.955423] ath10k_pci 0000:01:00.0: fwcfg key: tx_desc val: 2200
[ 13.961397] ath10k_pci 0000:01:00.0: fwcfg key: tids val: 256
[ 13.967699] ath10k_pci 0000:01:00.0: fwcfg key: skid_limit val: 360
[ 13.973441] ath10k_pci 0000:01:00.0: fwcfg key: max_amsdus val: 3
[ 13.982860] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 13.985885] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 0
[ 13.999861] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.9.0.2-00159 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery crc32 8e687dd3
[ 15.740937] EXT4-fs (sda1): mounted filesystem without journal. Opts: . Quota mode: disabled.
[ 16.272826] ath10k_pci 0000:01:00.0: Loading BDF type 0
[ 16.273752] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 826c8c57
[ 19.949947] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 8 peers: 80 tid: 256
[ 19.949998] ath10k_pci 0000:01:00.0: msdu-desc: 2200 skid: 360
[ 20.063719] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 80 raw 0 hwcrypto 1
[ 20.174995] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x46.
[ 20.176358] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 20.182829] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 20.340751] ath10k_pci 0001:01:00.0: fwcfg key: vdevs val: 8
[ 20.340789] ath10k_pci 0001:01:00.0: fwcfg key: peers val: 72
[ 20.345495] ath10k_pci 0001:01:00.0: fwcfg key: active_peers val: 64
[ 20.351296] ath10k_pci 0001:01:00.0: fwcfg key: stations val: 128
[ 20.357729] ath10k_pci 0001:01:00.0: fwcfg key: rate_ctrl_objs val: 7
[ 20.363912] ath10k_pci 0001:01:00.0: fwcfg key: fwname val: firmware-5.bin
[ 20.370381] ath10k_pci 0001:01:00.0: fwcfg key: fwver val: 5
[ 20.377170] ath10k_pci 0001:01:00.0: fwcfg key: nohwcrypt val: 0
[ 20.380332] ath10k: disabling DFS detection for radar signals: wlan0 [phy0]
[ 20.383122] ath10k_pci 0001:01:00.0: fwcfg key: ct_sta_mode val: 0
[ 20.396011] ath10k_pci 0001:01:00.0: fwcfg key: tx_desc val: 1024
[ 20.402240] ath10k_pci 0001:01:00.0: fwcfg key: tids val: 288
[ 20.408415] ath10k_pci 0001:01:00.0: fwcfg key: skid_limit val: 360
[ 20.414302] ath10k_pci 0001:01:00.0: fwcfg key: max_amsdus val: 3
[ 20.421112] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 20.426851] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 0
[ 20.441627] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.9.0.2-00159 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery crc32 8e687dd3
[ 22.717269] ath10k_pci 0001:01:00.0: Loading BDF type 0
[ 22.717961] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 826c8c57
[ 26.391972] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 8 peers: 72 tid: 288
[ 26.392010] ath10k_pci 0001:01:00.0: msdu-desc: 1024 skid: 360
[ 26.508744] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 128 raw 0 hwcrypto 1
[ 26.613797] ath10k_pci 0001:01:00.0: DFS region 0x0 not supported, will trigger radar for every pulse
[ 26.613976] ath10k_pci 0000:01:00.0: DFS region 0x0 not supported, will trigger radar for every pulse
[ 26.632835] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 30.947485] ECM init
[ 30.947534] ECM database jhash random seed: 0xec5a79a9
[ 31.039921] ECM init complete
[ 32.271538] Created a NSS virtual interface for dev [nssifb]
[ 32.271571] NSS IFB data callback registered
[ 32.276261] NSS IFB transmit callback registered
[ 32.281019] NSS IFB module loaded.
[ 32.291224] be396c63: Found net device [eth0]
[ 32.291256] be396c63: Net device [eth0] has NSS intf_num [1]
[ 32.296879] Nexthop successfully set for [eth0] to [nssifb]
[ 32.341500] __nss_qdisc_init[2175]:parent (65536) and TC_H_ROOT (-1))
[ 32.341516] __nss_qdisc_init[2176]:root->ops->owner (00000000) and THIS_MODULE (bf5e4f40))
[ 32.341540] __nss_qdisc_init[2177]:NSS qdisc c69a4c00 (type 1) used along with non-nss qdiscs, or the interface is currently down
[ 33.026904] ipq8064-mdio 37000000.mdio eth1: 1000 Mbps Full Duplex
[ 33.042215] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 33.045668] br-lan: port 1(eth1.1) entered blocking state
[ 33.049863] br-lan: port 1(eth1.1) entered disabled state
[ 33.055528] device eth1.1 entered promiscuous mode
[ 33.060803] device eth1 entered promiscuous mode
[ 33.067461] br-lan: port 1(eth1.1) entered blocking state
[ 33.070250] br-lan: port 1(eth1.1) entered listening state
[ 33.080989] ipq8064-mdio 37000000.mdio eth0: 1000 Mbps Full Duplex
[ 34.171556] ipq8064-mdio 37000000.mdio eth0: nss_gmac_change_mtu: Enabling Normal Frame MTU (Requested MTU [1500])
[ 34.176015] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 41.063182] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 8 peers: 80 tid: 256
[ 41.063224] ath10k_pci 0000:01:00.0: msdu-desc: 2200 skid: 360
[ 41.275168] ath10k_pci 0000:01:00.0: Unknown (10.4) eventid: 36933
[ 41.277097] ath10k_pci 0000:01:00.0: rts threshold -1
[ 41.281091] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 41.285704] debugfs: File 'virt_if' in directory 'stats' already present!
[ 41.296675] wlan0: Created a NSS virtual interface
[ 41.307741] br-lan: port 2(wlan0) entered blocking state
[ 41.307862] br-lan: port 2(wlan0) entered disabled state
[ 41.313620] device wlan0 entered promiscuous mode
[ 41.318758] br-lan: port 2(wlan0) entered blocking state
[ 41.323294] br-lan: port 2(wlan0) entered listening state
[ 41.329761] br-lan: port 2(wlan0) entered disabled state
[ 41.449539] br-lan: port 1(eth1.1) entered learning state
[ 42.051627] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 47.365381] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 8 peers: 72 tid: 288
[ 47.365423] ath10k_pci 0001:01:00.0: msdu-desc: 1024 skid: 360
[ 47.581328] ath10k_pci 0001:01:00.0: Unknown (10.4) eventid: 36933
[ 47.583125] ath10k_pci 0001:01:00.0: rts threshold -1
[ 47.587473] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 47.595340] debugfs: File 'virt_if' in directory 'stats' already present!
[ 47.602710] wlan1: Created a NSS virtual interface
[ 47.612736] br-lan: port 3(wlan1) entered blocking state
[ 47.614036] br-lan: port 3(wlan1) entered disabled state
[ 47.619795] device wlan1 entered promiscuous mode
[ 48.589594] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 48.589760] br-lan: port 2(wlan0) entered blocking state
[ 48.595044] br-lan: port 2(wlan0) entered listening state
[ 53.011299] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 53.011478] br-lan: port 3(wlan1) entered blocking state
[ 53.016748] br-lan: port 3(wlan1) entered listening state
[ 56.809542] br-lan: port 1(eth1.1) entered forwarding state
[ 56.809579] br-lan: topology change detected, sending tcn bpdu
[ 56.815454] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 63.849558] br-lan: port 2(wlan0) entered learning state
[ 68.329532] br-lan: port 3(wlan1) entered learning state
[ 79.209432] br-lan: port 2(wlan0) entered forwarding state
[ 79.209489] br-lan: topology change detected, sending tcn bpdu
[ 83.689588] br-lan: port 3(wlan1) entered forwarding state
[ 83.689655] br-lan: topology change detected, sending tcn bpdu
bootm
BusyBox v1.35.0 (2022-09-04 03:46:48 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r20766+1-796b38421f
-----------------------------------------------------
root@R7800:/#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment