Set thermostat temperature at specific time - homeassistant blueprint

set_climate_on_time.yaml

blueprint:
  name: Set thermostat temperature at specific time
  description: Sets a climate entity to a specifc temperature at a set time everyday. If climate entity is off, it is normally not accepting temperature updated. This blueprints checks if climate entity is off and the temperature update will be set when thermostat is going back in heating mode.
  domain: automation
  source_url: https://gist.github.com/dirkk1980/d3a60a5ebc7c58b1c56024cb447bef3c
  input:
    time_to_set:
      name: Time
      description: When should the temperature be set
      selector:
        time:
    climate_entity:
      name: Thermostat
      description: Climate entity which will get the temperature update
      selector:
        entity:
          domain: climate
    temp_to_set:
      name: Temperature
      description: Temperature to set on defined time
      default: 19.5
      selector:
        number:
          min: 10
          max: 30
          unit_of_measurement: degrees
          step: 0.5

trigger:
  - platform: time
    at: !input time_to_set

mode: queued

action:
  - choose:
      - conditions:
          - condition: state
            entity_id: !input climate_entity
            state: "heat"
        sequence:
          - service: climate.set_temperature
            entity_id: !input climate_entity
            data:
              temperature: !input temp_to_set
      - conditions:
          - condition: state
            entity_id: !input climate_entity
            state: "off"
        sequence:
          - wait_for_trigger:
              platform: state
              entity_id: !input climate_entity
              from: "off"
              to: "heat"
          #delay is necessary to prevents an override by other functions like window/doors sensor control which are restoring the prevoius temperature
          - delay: 10
          - service: climate.set_temperature
            entity_id: !input climate_entity
            data:
              temperature: !input temp_to_set