quallenbezwinger

blueprint:
  name: Motion-activated light scene with surrounding light level check and optional ambient scene
  description: Turn on a light scene when motion is detected. Three different scenes can be defined depending on time of day. Furthermore a source for checking sourrounding light can be defined to enable light only if it is dark enough.
  domain: automation
  source_url: https://gist.github.com/dirkk1980/3e5c23acb05fb639bafdc5036b91aae6
  input:
    motion_entity:
      name: Motion Sensor
      selector:
        entity:

quallenbezwinger

blueprint:
  name: window controlled heater
  description: turn on/off heater when opening/closing window or door sensor
  domain: automation
  source_url: https://gist.github.com/dirkk1980/8ba849b480844b32e9ca484e6de5d552
  input:
    heating_target:
      name: Heater
      selector:
        entity:

quallenbezwinger

blueprint:
  name: Activate scene by illuminance in time-frame
  description: Turn on scene if illuminance will gow under a specific threshold and if in specific time frame. Turn off group elements, if illuminance is above threshold. Scene will not activated if lightgoup is active to prevent an overwrite.
  domain: automation
  source_url: https://gist.github.com/dirkk1980/9e37a046474dc555f75b871c27ad5693
  input:
    lightsensor_entity:
      name: Illuminance Sensor
      selector:
        entity:

quallenbezwinger

blueprint:
  name: Set thermostat temperature at specific time
  description: Sets a climate entity to a specifc temperature at a set time everyday. If climate entity is off, it is normally not accepting temperature updated. This blueprints checks if climate entity is off and the temperature update will be set when thermostat is going back in heating mode.
  domain: automation
  source_url: https://gist.github.com/dirkk1980/d3a60a5ebc7c58b1c56024cb447bef3c
  input:
    time_to_set:
      name: Time
      description: When should the temperature be set
      selector:

quallenbezwinger

blueprint:
  name: Set thermostat temperature at specific times a day
  description: Sets a climate entity to a specifc temperatures at a set time everyday. If climate entity is off, it is normally not accepting temperature updated. This blueprints checks if climate entity is off and the temperature update will be set when thermostat is going back in heating mode.
  domain: automation
  source_url: https://gist.github.com/dirkk1980/70097f1a1e3cea543c3b0fa029754725
  input:
    time_to_set_morning:
      name: Time for morning
      description: When should the temperature be set
      selector:

quallenbezwinger

void setup() {
  pinMode(13,OUTPUT);
}

void loop() {
  digitalWrite(13,HIGH);
  delay(750);
  digitalWrite(13,LOW);
  delay(1000);
  digitalWrite(13,HIGH);