Follow the instructions to add NAT functionality to the OpenVPN for AWS VPC

configure-pat.sh

#!/bin/bash

# Configure the instance to run as a Port Address Translator (PAT) to provide
# Internet connectivity to private instances.
#

set -x
echo "Determining the MAC address on eth0"
ETH0_MAC=`/sbin/ifconfig  | /bin/grep eth0 | awk '{print tolower($5)}' | grep '^[0-9a-f]\{2\}\(:[0-9a-f]\{2\}\)\{5\}$'`
if [ $? -ne 0 ] ; then
   echo "Unable to determine MAC address on eth0" | logger -t "ec2"
   exit 1
fi
echo "Found MAC: ${ETH0_MAC} on eth0" | logger -t "ec2"


VPC_CIDR_URI="http://169.254.169.254/latest/meta-data/network/interfaces/macs/${ETH0_MAC}/vpc-ipv4-cidr-block"
echo "Metadata location for vpc ipv4 range: ${VPC_CIDR_URI}" | logger -t "ec2"

VPC_CIDR_RANGE=`curl --retry 3 --retry-delay 0 --silent --fail ${VPC_CIDR_URI}`
if [ $? -ne 0 ] ; then
   echo "Unable to retrive VPC CIDR range from meta-data. Using 0.0.0.0/0 instead. PAT may not function correctly" | logger -t "ec2"
   VPC_CIDR_RANGE="0.0.0.0/0"
else
   echo "Retrived the VPC CIDR range: ${VPC_CIDR_RANGE} from meta-data" |logger -t "ec2"
fi

echo 1 >  /proc/sys/net/ipv4/ip_forward && \
   echo 0 >  /proc/sys/net/ipv4/conf/eth0/send_redirects && \
   /sbin/iptables -t nat -A POSTROUTING -o eth0 -s ${VPC_CIDR_RANGE} -j MASQUERADE

if [ $? -ne 0 ] ; then
   echo "Configuration of PAT failed" | logger -t "ec2"
   exit 0
fi

echo "Configuration of PAT complete" |logger -t "ec2"
exit 0

Instructions

In order to 

* paste the text from the file in the gist: sudo vim /usr/local/sbin/configure-pat.sh
* Make it executable: sudo chmod u+x /usr/local/sbin/configure-pat.sh
* Edit /etc/rc.local: "sudo vim /etc/rc.local" and add the following line: "/usr/local/sbin/configure-pat.sh"
* Reboot the instance