rassaifred / gist:3b335d57a2f950a4fc813b4aeceb8ba9

Created September 9, 2020 16:17 — forked from jsturgis/gist:3b19447b304616f18657

public test videos

	var mediaJSON = { "categories" : [ { "name" : "Movies",
	"videos" : [
	{ "description" : "Big Buck Bunny tells the story of a giant rabbit with a heart bigger than himself. When one sunny day three rodents rudely harass him, something snaps... and the rabbit ain't no bunny anymore! In the typical cartoon tradition he prepares the nasty rodents a comical revenge.\n\nLicensed under the Creative Commons Attribution license\nhttp://www.bigbuckbunny.org",
	"sources" : [ "http://commondatastorage.googleapis.com/gtv-videos-bucket/sample/BigBuckBunny.mp4" ],
	"subtitle" : "By Blender Foundation",
	"thumb" : "images/BigBuckBunny.jpg",
	"title" : "Big Buck Bunny"
	},
	{ "description" : "The first Blender Open Movie from 2006",
	"sources" : [ "http://commondatastorage.googleapis.com/gtv-videos-bucket/sample/ElephantsDream.mp4" ],

rassaifred / Arduino-IR-TX-NEC

Created May 8, 2020 02:32 — forked from EEVblog/Arduino-IR-TX-NEC

A simple Arduino driver for the NEC (Japanese) Infrared IR protocol. Drive an IR LED direct with your own code. This is a direct pin bit-bang approach, so beware about interrupts and timing difference between hardware. Feel free to use hardware PWM to generate the carrier frequency if you want better accuracy.

	//*****************************************
	// NEC (Japanese) Infrared code sending library for the Arduino
	// Send a standard NEC 4 byte protocol direct to an IR LED on the define pin
	// Assumes an IR LED connected on I/O pin to ground, or equivalent driver.
	// Tested on a Freetronics Eleven Uno compatible
	// Written by David L. Jones www.eevblog.com
	// Youtube video explaining this code: http://www.youtube.com/watch?v=BUvFGTxZBG8
	// License: Creative Commons CC BY
	//*****************************************

rassaifred / auto_mount_usb.py

Created January 19, 2019 13:23 — forked from slobdell/auto_mount_usb.py

Automatically mount USB drive in python script

	import commands

	# ASSUMED THAT THIS COMMAND HAS ALREADY BEEN RUN
	# sudo mkdir /mnt/usb_stick

	MOUNT_DIR = "/mnt/usb_stick"

	def run_command(command):
	# start = time.time()
	ret_code, output = commands.getstatusoutput(command)

rassaifred / Installing Python 3.7.0 on Raspbian.rst

Created August 26, 2018 21:31 — forked from SeppPenner/Installing Python 3.7.4 on Raspbian.rst

Installing Python 3.7.0 on Raspbian

As of July 2018, Raspbian does not yet include the latest Python release, Python 3.7.0 This means we will have to build it ourselves, and here is how to do it.

Install the required build-tools (some might already be installed on your system).