mirrorlist

fdisk -l

Disk /dev/sda: 320 GB, 320070320640 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System 
/dev/sda1   *           1          25      200781    7  HPFS/NTFS
/dev/sda2              27        6554    52428127    7  HPFS/NTFS
Warning: Partition 2 does not end on cylinder boundary.
/dev/sda3            6555       36988   244453072    f  Extended LBA
Warning: Partition 3 does not end on cylinder boundary.
/dev/sda6            6555       10288    29985322   83  Linux
Warning: Partition 6 does not end on cylinder boundary.
/dev/sda7           10289       10304      120487   83  Linux
Warning: Partition 7 does not end on cylinder boundary.
/dev/sda8           10305       32188   175775197   83  Linux
Warning: Partition 8 does not end on cylinder boundary.
/dev/sda5           32189       36988    38547967    7  HPFS/NTFS
Warning: Partition 5 does not end on cylinder boundary.
/dev/sda4           36988       38914    15470595   12  Compaq diag
Warning: Partition 4 does not end on cylinder boundary.

inittab

#
# /etc/inittab
#

#  Runlevels:
#    0    Halt
#    1(S)	Single-user
#    2    Not used
#    3    Multi-user
#    4    Not used
#    5    X11
#    6    Reboot

## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:

rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p

# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux

# Serial Virtual Console for KVM and others VMs
#s0:2345:respawn:/sbin/agetty -8 9600 ttyS0 linux

# Hypervisor Virtual Console for Xen and KVM
#h0:2345:respawn:/sbin/agetty -8 38400 hvc0 linux

ca::ctrlaltdel:/sbin/shutdown -t3 -r now

# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
x:5:respawn:/usr/bin/slim >/dev/null 2>&1

# End of file

mirrorlist

Server = http://mirrors3.kernel.org/archlinux/$repo/os/i686
Server = http://mirrors1.kernel.org/archlinux/$repo/os/i686
Server = http://mirrors2.kernel.org/archlinux/$repo/os/i686

rc.conf

#
# /etc/rc.conf - Main Configuration for Arch Linux
#

# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
#   in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="pl_PL.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Warsaw"
KEYMAP="lat2-16.psfu.gz"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"

# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(fuse)

# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"

# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="myhost"

# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
#   - prefix an entry in INTERFACES with a ! to disable it
#   - no hyphens in your interface names - Bash doesn't like it
# 
# DHCP:     Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#

#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)

# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
#   - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
 
# Enable these network profiles at boot-up.  These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
#   - set to 'menu' to present a menu during boot-up (dialog package required)
#   - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)

# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
#   - prefix a daemon with a ! to disable it
#   - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(syslog-ng dbus @network @netfs @crond @rc.vboxadd)