ESPHome YAML Template - ESP32

ESPHome YAML Template - ESP32.yaml

### START - Update this section with relevant details ###

substitutions:

  device_name: "device-name-here"
  friendly_name: Device Name Here
  board_type: esp32dev
  framework: esp-idf # arduino or esp-idf (recommended for ESP32)

  # ESPHome API used by Home Assistant, etc
  # If you go to this page it generates one for you automatically!
  # https://esphome.io/components/api.html#configuration-variables
  api_key: "Generate a key and put it here"

  ap_password: "randomsecurepassword" # Fallback WiFi Access Point password
  ota_password: "differentrandomsecurepassword" # Password used to remotely flash firmware

### END ###

esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}

esp32:
  board: ${board_type}
  framework:
    type: ${framework}

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: ${api_key}

ota:
  password: ${ota_password}

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: ${device_name}
    password: ${ap_password}

captive_portal:

# Restart & Safe Mode Buttons
button:
  - platform: restart
    name: "Restart Device"
  - platform: safe_mode
    name: "Restart in Safe Mode"