xesscorp

///////////////////////////////////////////////////////////////////////////////////////
// This program uses the ESP8266 Wifi module to access a webpage. It's an adaptation of
// the program discussed at http://hackaday.io/project/3072/instructions
// and shown here http://dunarbin.com/esp8266/retroBrowser.ino .
//
// This program was ported to the ZPUino 2.0, a softcore processor that runs on an FPGA
// and emulates an Arduino.
//
// This program works with version 00160901 of the ESP8266 firmware.
///////////////////////////////////////////////////////////////////////////////////////

xbb

Use this as an example on how to start the virtual console without the need of Java Web Start or accessing it from the web interface.
You can use the user and password that you use for the web interface.

You need an old JRE... I used 1.7.0_80 from the Server JRE package, also I have tested successfully 1.7.0_79 with MacOS.
You don't need to install it, just extract it or copy the files in "jre" folder.

Open the viewer.jnlp file that you get by launching the virtual console from the web interface with a text editor.
Note the urls to the jar files. Download the main jar file avctKVM.jar and the libs for your operating system and architecture.
Extract the dlls (.so Linux, .jnilib MacOS) from the jar libs.

styblope

Enable TCP port 2375 for external connection to Docker

See this issue.
Docker best practise to Control and configure Docker with systemd.

1. Create daemon.json file in /etc/docker:

    {"hosts": ["tcp://0.0.0.0:2375", "unix:///var/run/docker.sock"]}
   

Bubblemelon

Using QEMU KVM for Red Hat CoreOS

• Running a Red Hat CoreOS Virtual Machine
  • Details on the qemu-kvm options used
• Contents of key.ign
• Logging into the Red Hat CoreOS VM
• More information on qemu-kvm

Running a Red Hat CoreOS Virtual Machine

Run this command to get the a qemu-kvm virtual machine for Red Hat CoreOS instance running:

Snipercaine

#ThermoZztat
# These are example segments meant to be copied into the 3 main files. 

############### Examples for Configuration.yaml ###############
switch:
  - platform: mqtt
    name: "Upstairs Fan"
    command_topic: "cmnd/ThermoZztat/POWER1"
    state_topic: "stat/ThermoZztat/POWER1"
    qos: 1

lordneon

Intro

This is a simple guide on how to automate UK lights with a Shelly 1 by installing the shelly 1 relay into the ceiling pendant which has both permanent live, neutral and a switched live back from the wall switch.

These steps are from my own experience making my lighting "smart" but also user friendly (it works via a wall switch!). This simple guide will go through replacing an a normal ceiling pendant with one with room for a Shelly 1. If you have a ceiling light with a bigger base it's even easier.

Warning Electrical regulations must be followed by law. If you are not a competent person under the regulations do not attempt electrical work. https://www.diydoctor.org.uk/projects/electrical_safety.htm

Wiring Diagram

This diagram has been taken from here and modified to include the Shelly 1.

bpsib

#EXTM3U
#EXTINF:-1,BBC - Radio 1
http://as-hls-ww-live.akamaized.net/pool_01505109/live/ww/bbc_radio_one/bbc_radio_one.isml/bbc_radio_one-audio%3d96000.norewind.m3u8
#EXTINF:-1,BBC - Radio 1Xtra
http://as-hls-ww-live.akamaized.net/pool_92079267/live/ww/bbc_1xtra/bbc_1xtra.isml/bbc_1xtra-audio%3d96000.norewind.m3u8
#EXTINF:-1,BBC - Radio 1Dance
http://as-hls-ww-live.akamaized.net/pool_62063831/live/ww/bbc_radio_one_dance/bbc_radio_one_dance.isml/bbc_radio_one_dance-audio%3d96000.norewind.m3u8
#EXTINF:-1,BBC - Radio 1 Anthems (UK Only)
http://as-hls-uk-live.akamaized.net/pool_904/live/uk/bbc_radio_one_anthems/bbc_radio_one_anthems.isml/bbc_radio_one_anthems-audio%3d96000.norewind.m3u8
#EXTINF:-1,BBC - Radio 2