Skip to content

Instantly share code, notes, and snippets.

@rektide
Created February 26, 2015 05:33
Show Gist options
  • Save rektide/5fae60198702cb2d8371 to your computer and use it in GitHub Desktop.
Save rektide/5fae60198702cb2d8371 to your computer and use it in GitHub Desktop.
jmicron-based-ztc-uasp-m2.dmesg
[ 1392.606894] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd
[ 1392.619364] usb 2-2: New USB device found, idVendor=152d, idProduct=0539
[ 1392.619369] usb 2-2: New USB device strings: Mfr=10, Product=11, SerialNumber=3
[ 1392.619371] usb 2-2: Product: USB to ATA/ATAPI Bridge
[ 1392.619373] usb 2-2: Manufacturer: JMicron
[ 1392.619375] usb 2-2: SerialNumber: 00A123457372
[ 1392.620649] scsi host8: uas
[ 1392.622059] scsi 8:0:0:0: Direct-Access JMicron 0125 PQ: 0 ANSI: 6
[ 1392.624369] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 1392.625933] sd 8:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1392.625936] sd 8:0:0:0: [sdb] 4096-byte physical blocks
[ 1392.628541] sd 8:0:0:0: [sdb] Write Protect is off
[ 1392.628545] sd 8:0:0:0: [sdb] Mode Sense: 67 00 10 08
[ 1392.629765] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1422.733226] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1422.733232] sd 8:0:0:0: CDB:
[ 1422.733234] Report supported operation codes: a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1422.733327] scsi host8: uas_eh_bus_reset_handler start
[ 1422.835625] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1422.846821] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1422.846826] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1422.846829] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1422.846830] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1422.847695] scsi host8: uas_eh_bus_reset_handler success
[ 1453.749980] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1453.749991] sd 8:0:0:0: CDB:
[ 1453.749995] Report supported operation codes: a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1453.750098] scsi host8: uas_eh_bus_reset_handler start
[ 1453.852300] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1453.863294] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1453.863302] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1453.863306] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1453.863310] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1453.864197] scsi host8: uas_eh_bus_reset_handler success
[ 1484.766678] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1484.766683] sd 8:0:0:0: CDB:
[ 1484.766685] Report supported operation codes: a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1484.766745] scsi host8: uas_eh_bus_reset_handler start
[ 1484.869200] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1484.880140] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1484.880150] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1484.880155] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1484.880160] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1484.881306] scsi host8: uas_eh_bus_reset_handler success
[ 1515.719488] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1515.719497] sd 8:0:0:0: CDB:
[ 1515.719501] Report supported operation codes: a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1515.719583] scsi host8: uas_eh_bus_reset_handler start
[ 1515.821904] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1515.832998] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1515.833003] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1515.833006] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1515.833008] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1515.833908] scsi host8: uas_eh_bus_reset_handler success
[ 1546.672359] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1546.672371] sd 8:0:0:0: CDB:
[ 1546.672376] Report supported operation codes: a3 0c 01 93 00 00 00 00 02 00 00 00
[ 1546.672490] scsi host8: uas_eh_bus_reset_handler start
[ 1546.774911] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1546.785796] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1546.785801] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1546.785804] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1546.785806] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1546.786731] scsi host8: uas_eh_bus_reset_handler success
[ 1577.625220] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1577.625225] sd 8:0:0:0: CDB:
[ 1577.625227] Report supported operation codes: a3 0c 01 93 00 00 00 00 02 00 00 00
[ 1577.625283] scsi host8: uas_eh_bus_reset_handler start
[ 1577.727745] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1577.738652] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1577.738662] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1577.738668] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1577.738672] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1577.739854] scsi host8: uas_eh_bus_reset_handler success
[ 1608.642009] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1608.642014] sd 8:0:0:0: CDB:
[ 1608.642016] Report supported operation codes: a3 0c 01 93 00 00 00 00 02 00 00 00
[ 1608.642084] scsi host8: uas_eh_bus_reset_handler start
[ 1608.744170] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1608.755424] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1608.755429] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1608.755432] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1608.755434] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1608.756326] scsi host8: uas_eh_bus_reset_handler success
[ 1639.594970] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1639.594977] sd 8:0:0:0: CDB:
[ 1639.594979] Report supported operation codes: a3 0c 01 93 00 00 00 00 02 00 00 00
[ 1639.595051] scsi host8: uas_eh_bus_reset_handler start
[ 1639.697094] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1639.708477] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1639.708494] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1639.708497] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1639.708499] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1639.709394] scsi host8: uas_eh_bus_reset_handler success
[ 1670.611796] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1670.611802] sd 8:0:0:0: CDB:
[ 1670.611804] Report supported operation codes: a3 0c 01 41 00 00 00 00 02 00 00 00
[ 1670.611896] scsi host8: uas_eh_bus_reset_handler start
[ 1670.713950] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1670.725075] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1670.725081] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1670.725083] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1670.725085] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1670.725959] scsi host8: uas_eh_bus_reset_handler success
[ 1701.564735] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1701.564740] sd 8:0:0:0: CDB:
[ 1701.564742] Report supported operation codes: a3 0c 01 41 00 00 00 00 02 00 00 00
[ 1701.564835] scsi host8: uas_eh_bus_reset_handler start
[ 1701.667110] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1701.678229] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1701.678243] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1701.678250] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1701.678257] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1701.679312] scsi host8: uas_eh_bus_reset_handler success
[ 1732.517705] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1732.517710] sd 8:0:0:0: CDB:
[ 1732.517712] Report supported operation codes: a3 0c 01 41 00 00 00 00 02 00 00 00
[ 1732.517756] scsi host8: uas_eh_bus_reset_handler start
[ 1732.620009] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1732.631774] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1732.631781] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1732.631785] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1732.631788] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1732.632946] scsi host8: uas_eh_bus_reset_handler success
[ 1763.470708] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1763.470716] sd 8:0:0:0: CDB:
[ 1763.470718] Report supported operation codes: a3 0c 01 41 00 00 00 00 02 00 00 00
[ 1763.470795] scsi host8: uas_eh_bus_reset_handler start
[ 1763.572964] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1763.584010] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1763.584015] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1763.584017] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1763.584019] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1763.584838] scsi host8: uas_eh_bus_reset_handler success
[ 1796.470120] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1796.470127] sd 8:0:0:0: CDB:
[ 1796.470130] Report supported operation codes: a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1796.470184] scsi host8: uas_eh_bus_reset_handler start
[ 1796.572332] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1796.583802] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1796.583807] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1796.583810] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1796.583812] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1796.584739] scsi host8: uas_eh_bus_reset_handler success
[ 1827.423145] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1827.423151] sd 8:0:0:0: CDB:
[ 1827.423154] Report supported operation codes: a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1827.423220] scsi host8: uas_eh_bus_reset_handler start
[ 1827.525406] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1827.536669] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1827.536675] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1827.536677] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1827.536679] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1827.537515] scsi host8: uas_eh_bus_reset_handler success
[ 1858.440092] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1858.440098] sd 8:0:0:0: CDB:
[ 1858.440100] Report supported operation codes: a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1858.440151] scsi host8: uas_eh_bus_reset_handler start
[ 1858.542306] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1858.553520] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1858.553527] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1858.553530] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1858.553532] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1858.554418] scsi host8: uas_eh_bus_reset_handler success
[ 1889.457122] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1889.457128] sd 8:0:0:0: CDB:
[ 1889.457129] Report supported operation codes: a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1889.457197] scsi host8: uas_eh_bus_reset_handler start
[ 1889.559411] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1889.570339] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1889.570343] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1889.570345] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1889.570347] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1889.571144] scsi host8: uas_eh_bus_reset_handler success
[ 1920.410184] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1920.410190] sd 8:0:0:0: CDB:
[ 1920.410191] Report supported operation codes: a3 0c 01 93 00 00 00 00 02 00 00 00
[ 1920.410243] scsi host8: uas_eh_bus_reset_handler start
[ 1920.512453] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1920.523448] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1920.523456] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1920.523461] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1920.523465] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1920.524377] scsi host8: uas_eh_bus_reset_handler success
[ 1951.363186] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1951.363191] sd 8:0:0:0: CDB:
[ 1951.363193] Report supported operation codes: a3 0c 01 93 00 00 00 00 02 00 00 00
[ 1951.363319] scsi host8: uas_eh_bus_reset_handler start
[ 1951.465384] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1951.476472] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1951.476477] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1951.476479] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1951.476480] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1951.477277] scsi host8: uas_eh_bus_reset_handler success
[ 1982.316277] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 1982.316282] sd 8:0:0:0: CDB:
[ 1982.316284] Report supported operation codes: a3 0c 01 93 00 00 00 00 02 00 00 00
[ 1982.316380] scsi host8: uas_eh_bus_reset_handler start
[ 1982.418754] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 1982.430111] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 1982.430116] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 1982.430119] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 1982.430121] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 1982.431010] scsi host8: uas_eh_bus_reset_handler success
[ 2013.333099] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 2013.333104] sd 8:0:0:0: CDB:
[ 2013.333106] Report supported operation codes: a3 0c 01 93 00 00 00 00 02 00 00 00
[ 2013.333155] scsi host8: uas_eh_bus_reset_handler start
[ 2013.435172] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 2013.446900] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 2013.446905] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 2013.446907] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 2013.446909] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 2013.447863] scsi host8: uas_eh_bus_reset_handler success
[ 2044.349835] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 2044.349841] sd 8:0:0:0: CDB:
[ 2044.349842] Report supported operation codes: a3 0c 01 41 00 00 00 00 02 00 00 00
[ 2044.349893] scsi host8: uas_eh_bus_reset_handler start
[ 2044.452363] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 2044.463384] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 2044.463388] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 2044.463391] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 2044.463393] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 2044.464350] scsi host8: uas_eh_bus_reset_handler success
[ 2075.302617] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 2075.302623] sd 8:0:0:0: CDB:
[ 2075.302625] Report supported operation codes: a3 0c 01 41 00 00 00 00 02 00 00 00
[ 2075.302679] scsi host8: uas_eh_bus_reset_handler start
[ 2075.404789] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 2075.416098] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 2075.416103] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 2075.416106] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 2075.416108] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 2075.416965] scsi host8: uas_eh_bus_reset_handler success
[ 2106.255455] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 2106.255460] sd 8:0:0:0: CDB:
[ 2106.255462] Report supported operation codes: a3 0c 01 41 00 00 00 00 02 00 00 00
[ 2106.255569] scsi host8: uas_eh_bus_reset_handler start
[ 2106.357799] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 2106.368759] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 2106.368764] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 2106.368766] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 2106.368768] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 2106.369596] scsi host8: uas_eh_bus_reset_handler success
[ 2137.208334] sd 8:0:0:0: uas_eh_abort_handler 0 tag 2 inflight: IN
[ 2137.208340] sd 8:0:0:0: CDB:
[ 2137.208342] Report supported operation codes: a3 0c 01 41 00 00 00 00 02 00 00 00
[ 2137.208406] scsi host8: uas_eh_bus_reset_handler start
[ 2137.310565] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 2137.321620] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638200
[ 2137.321627] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638248
[ 2137.321631] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212638290
[ 2137.321635] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802126382d8
[ 2137.322532] scsi host8: uas_eh_bus_reset_handler success
[ 2168.225240] sd 8:0:0:0: [sdb] uas_eh_abort_handler 0 tag 2 inflight: CMD IN
[ 2168.225246] sd 8:0:0:0: [sdb] CDB:
[ 2168.225248] Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2168.225366] scsi host8: uas_eh_bus_reset_handler start
[ 2168.393900] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 2173.400423] usb 2-2: device descriptor read/8, error -110
[ 2173.501296] usb 2-2: reset SuperSpeed USB device number 6 using xhci_hcd
[ 2178.508622] usb 2-2: device descriptor read/8, error -110
[ 2178.661123] scsi host8: uas_post_reset: alloc streams error -19 after reset
[ 2178.661165] usb 2-2: USB disconnect, device number 6
[ 2278.482231] INFO: task kworker/u8:4:7993 blocked for more than 120 seconds.
[ 2278.482236] Not tainted 3.18.3 #4
[ 2278.482237] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2278.482239] kworker/u8:4 D 0000000000000000 0 7993 2 0x00000000
[ 2278.482249] Workqueue: events_unbound async_run_entry_fn
[ 2278.482251] ffff8801db69c290 0000000000000002 0000000200000008 ffff880212668910
[ 2278.482254] 0000000000013740 ffff8801db24bfd8 0000000000013740 ffff8801db69c290
[ 2278.482257] ffffffff8101b8e5 ffff88021ea14008 ffff88021edade88 0000000000000002
[ 2278.482260] Call Trace:
[ 2278.482267] [<ffffffff8101b8e5>] ? read_tsc+0x5/0x10
[ 2278.482271] [<ffffffff81798980>] ? bit_wait+0x60/0x60
[ 2278.482274] [<ffffffff817980f6>] ? io_schedule+0xa6/0x140
[ 2278.482276] [<ffffffff817989af>] ? bit_wait_io+0x2f/0x60
[ 2278.482278] [<ffffffff81798597>] ? __wait_on_bit+0x57/0x80
[ 2278.482282] [<ffffffff811df2e0>] ? blkdev_readpages+0x20/0x20
[ 2278.482287] [<ffffffff81139ae1>] ? wait_on_page_bit+0xb1/0xc0
[ 2278.482291] [<ffffffff8109fc20>] ? autoremove_wake_function+0x30/0x30
[ 2278.482295] [<ffffffff81139cac>] ? wait_on_page_read+0x4c/0x60
[ 2278.482299] [<ffffffff8113b391>] ? do_read_cache_page+0x91/0x1b0
[ 2278.482302] [<ffffffff814725f6>] ? string.isra.7+0x36/0xe0
[ 2278.482307] [<ffffffff8144e5a7>] ? read_dev_sector+0x27/0xa0
[ 2278.482309] [<ffffffff8144f910>] ? check_partition+0x210/0x210
[ 2278.482312] [<ffffffff8144f94b>] ? adfspart_check_ICS+0x3b/0x260
[ 2278.482314] [<ffffffff81474049>] ? snprintf+0x39/0x40
[ 2278.482317] [<ffffffff8144f910>] ? check_partition+0x210/0x210
[ 2278.482319] [<ffffffff8144f7f7>] ? check_partition+0xf7/0x210
[ 2278.482321] [<ffffffff8144ed7f>] ? rescan_partitions+0x9f/0x290
[ 2278.482324] [<ffffffff8179a479>] ? mutex_lock+0x9/0x30
[ 2278.482327] [<ffffffff811e03bf>] ? __blkdev_get+0x30f/0x460
[ 2278.482330] [<ffffffff811debe0>] ? bdev_test+0x10/0x10
[ 2278.482333] [<ffffffff811e0548>] ? blkdev_get+0x38/0x360
[ 2278.482335] [<ffffffff811df1b3>] ? bdget+0x123/0x140
[ 2278.482339] [<ffffffff8144c95f>] ? add_disk+0x3ff/0x4a0
[ 2278.482342] [<ffffffff815c107d>] ? sd_probe_async+0xfd/0x1d0
[ 2278.482346] [<ffffffff81083cbd>] ? async_run_entry_fn+0x2d/0xe0
[ 2278.482350] [<ffffffff8107c39d>] ? process_one_work+0x14d/0x460
[ 2278.482354] [<ffffffff8107c71b>] ? worker_thread+0x6b/0x5c0
[ 2278.482357] [<ffffffff8107c6b0>] ? process_one_work+0x460/0x460
[ 2278.482360] [<ffffffff810814de>] ? kthread+0xce/0xf0
[ 2278.482363] [<ffffffff8101be75>] ? sched_clock+0x5/0x10
[ 2278.482367] [<ffffffff81080000>] ? __kernel_text_address+0x50/0x80
[ 2278.482370] [<ffffffff81081410>] ? kthread_create_on_node+0x180/0x180
[ 2278.482373] [<ffffffff8179c97c>] ? ret_from_fork+0x7c/0xb0
[ 2278.482376] [<ffffffff81081410>] ? kthread_create_on_node+0x180/0x180
[ 2398.393203] INFO: task kworker/3:2:159 blocked for more than 120 seconds.
[ 2398.393208] Not tainted 3.18.3 #4
[ 2398.393210] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2398.393211] kworker/3:2 D 0000000000000000 0 159 2 0x00000000
[ 2398.393221] Workqueue: usb_hub_wq hub_event
[ 2398.393224] ffff880212b5a410 0000000000000002 ffff8801dadb48f0 ffff880213daf310
[ 2398.393227] 0000000000013740 ffff8800cc1cbfd8 0000000000013740 ffff880212b5a410
[ 2398.393230] ffff880212b5a410 ffff8801dadb48f0 ffff8801dadb48f4 ffff880212b5a410
[ 2398.393233] Call Trace:
[ 2398.393239] [<ffffffff81798304>] ? schedule_preempt_disabled+0x24/0x70
[ 2398.393244] [<ffffffff8179a3fd>] ? __mutex_lock_slowpath+0x8d/0x100
[ 2398.393246] [<ffffffff8179a486>] ? mutex_lock+0x16/0x30
[ 2398.393250] [<ffffffff815ef217>] ? usb_disconnect+0x47/0x2c0
[ 2398.393254] [<ffffffff815f13bd>] ? hub_event+0x88d/0x13b0
[ 2398.393258] [<ffffffff81089ff8>] ? finish_task_switch+0x118/0x180
[ 2398.393263] [<ffffffff8107c39d>] ? process_one_work+0x14d/0x460
[ 2398.393266] [<ffffffff8107c71b>] ? worker_thread+0x6b/0x5c0
[ 2398.393269] [<ffffffff8107c6b0>] ? process_one_work+0x460/0x460
[ 2398.393272] [<ffffffff810814de>] ? kthread+0xce/0xf0
[ 2398.393277] [<ffffffff8101be75>] ? sched_clock+0x5/0x10
[ 2398.393281] [<ffffffff81080000>] ? __kernel_text_address+0x50/0x80
[ 2398.393284] [<ffffffff81081410>] ? kthread_create_on_node+0x180/0x180
[ 2398.393287] [<ffffffff8179c97c>] ? ret_from_fork+0x7c/0xb0
[ 2398.393290] [<ffffffff81081410>] ? kthread_create_on_node+0x180/0x180
[ 2398.393312] INFO: task kworker/u8:4:7993 blocked for more than 120 seconds.
[ 2398.393314] Not tainted 3.18.3 #4
[ 2398.393315] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2398.393316] kworker/u8:4 D 0000000000000000 0 7993 2 0x00000000
[ 2398.393322] Workqueue: events_unbound async_run_entry_fn
[ 2398.393323] ffff8801db69c290 0000000000000002 0000000200000008 ffff880212668910
[ 2398.393326] 0000000000013740 ffff8801db24bfd8 0000000000013740 ffff8801db69c290
[ 2398.393329] ffffffff8101b8e5 ffff88021ea14008 ffff88021edade88 0000000000000002
[ 2398.393331] Call Trace:
[ 2398.393335] [<ffffffff8101b8e5>] ? read_tsc+0x5/0x10
[ 2398.393338] [<ffffffff81798980>] ? bit_wait+0x60/0x60
[ 2398.393340] [<ffffffff817980f6>] ? io_schedule+0xa6/0x140
[ 2398.393342] [<ffffffff817989af>] ? bit_wait_io+0x2f/0x60
[ 2398.393345] [<ffffffff81798597>] ? __wait_on_bit+0x57/0x80
[ 2398.393349] [<ffffffff811df2e0>] ? blkdev_readpages+0x20/0x20
[ 2398.393354] [<ffffffff81139ae1>] ? wait_on_page_bit+0xb1/0xc0
[ 2398.393359] [<ffffffff8109fc20>] ? autoremove_wake_function+0x30/0x30
[ 2398.393362] [<ffffffff81139cac>] ? wait_on_page_read+0x4c/0x60
[ 2398.393366] [<ffffffff8113b391>] ? do_read_cache_page+0x91/0x1b0
[ 2398.393369] [<ffffffff814725f6>] ? string.isra.7+0x36/0xe0
[ 2398.393375] [<ffffffff8144e5a7>] ? read_dev_sector+0x27/0xa0
[ 2398.393377] [<ffffffff8144f910>] ? check_partition+0x210/0x210
[ 2398.393380] [<ffffffff8144f94b>] ? adfspart_check_ICS+0x3b/0x260
[ 2398.393383] [<ffffffff81474049>] ? snprintf+0x39/0x40
[ 2398.393385] [<ffffffff8144f910>] ? check_partition+0x210/0x210
[ 2398.393387] [<ffffffff8144f7f7>] ? check_partition+0xf7/0x210
[ 2398.393390] [<ffffffff8144ed7f>] ? rescan_partitions+0x9f/0x290
[ 2398.393392] [<ffffffff8179a479>] ? mutex_lock+0x9/0x30
[ 2398.393395] [<ffffffff811e03bf>] ? __blkdev_get+0x30f/0x460
[ 2398.393398] [<ffffffff811debe0>] ? bdev_test+0x10/0x10
[ 2398.393401] [<ffffffff811e0548>] ? blkdev_get+0x38/0x360
[ 2398.393403] [<ffffffff811df1b3>] ? bdget+0x123/0x140
[ 2398.393407] [<ffffffff8144c95f>] ? add_disk+0x3ff/0x4a0
[ 2398.393410] [<ffffffff815c107d>] ? sd_probe_async+0xfd/0x1d0
[ 2398.393414] [<ffffffff81083cbd>] ? async_run_entry_fn+0x2d/0xe0
[ 2398.393417] [<ffffffff8107c39d>] ? process_one_work+0x14d/0x460
[ 2398.393420] [<ffffffff8107c71b>] ? worker_thread+0x6b/0x5c0
[ 2398.393423] [<ffffffff8107c6b0>] ? process_one_work+0x460/0x460
[ 2398.393426] [<ffffffff810814de>] ? kthread+0xce/0xf0
[ 2398.393429] [<ffffffff8101be75>] ? sched_clock+0x5/0x10
[ 2398.393432] [<ffffffff81080000>] ? __kernel_text_address+0x50/0x80
[ 2398.393435] [<ffffffff81081410>] ? kthread_create_on_node+0x180/0x180
[ 2398.393438] [<ffffffff8179c97c>] ? ret_from_fork+0x7c/0xb0
[ 2398.393440] [<ffffffff81081410>] ? kthread_create_on_node+0x180/0x180
[ 2398.393444] INFO: task scsi_eh_8:10736 blocked for more than 120 seconds.
[ 2398.393445] Not tainted 3.18.3 #4
[ 2398.393446] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2398.393447] scsi_eh_8 D 0000000000000000 0 10736 2 0x00000000
[ 2398.393450] ffff88009618cb90 0000000000000002 ffff8801dadb4800 ffff880213da49d0
[ 2398.393452] 0000000000013740 ffff8801be2dbfd8 0000000000013740 ffff88009618cb90
[ 2398.393455] ffffffff81c44780 ffffffffffffffff ffffffff81cb19b0 ffff88009625ac10
[ 2398.393458] Call Trace:
[ 2398.393462] [<ffffffff81083e15>] ? async_synchronize_cookie_domain+0x55/0xd0
[ 2398.393465] [<ffffffff8109fbf0>] ? __wake_up_sync+0x10/0x10
[ 2398.393467] [<ffffffff815be2a7>] ? sd_remove+0x47/0xc0
[ 2398.393472] [<ffffffff815883d9>] ? __device_release_driver+0x79/0xf0
[ 2398.393475] [<ffffffff81587060>] ? bus_uevent_store+0x40/0x40
[ 2398.393478] [<ffffffff8158846d>] ? device_release_driver+0x1d/0x30
[ 2398.393481] [<ffffffff81587e12>] ? bus_remove_device+0xf2/0x140
[ 2398.393484] [<ffffffff815849be>] ? device_del+0x11e/0x200
[ 2398.393488] [<ffffffff815ba3e5>] ? __scsi_remove_device+0xc5/0xd0
[ 2398.393491] [<ffffffff815b8a04>] ? scsi_forget_host+0x64/0x70
[ 2398.393496] [<ffffffff815ab87d>] ? scsi_remove_host+0x6d/0x110
[ 2398.393502] [<ffffffff8162f2fb>] ? uas_disconnect+0x7b/0x90
[ 2398.393507] [<ffffffff815fb22d>] ? usb_unbind_interface+0x1ed/0x2c0
[ 2398.393510] [<ffffffff815883d9>] ? __device_release_driver+0x79/0xf0
[ 2398.393513] [<ffffffff8158846d>] ? device_release_driver+0x1d/0x30
[ 2398.393516] [<ffffffff815fb3fd>] ? unbind_marked_interfaces.isra.10+0x5d/0x80
[ 2398.393519] [<ffffffff815fb570>] ? usb_unbind_and_rebind_marked_interfaces+0x10/0x20
[ 2398.393523] [<ffffffff815ee7ed>] ? usb_reset_device+0x19d/0x240
[ 2398.393528] [<ffffffff8162f3b8>] ? uas_eh_bus_reset_handler+0xa8/0x180
[ 2398.393532] [<ffffffff815ae0aa>] ? scsi_try_bus_reset+0x3a/0x140
[ 2398.393535] [<ffffffff815afe69>] ? scsi_eh_ready_devs+0x839/0xcd0
[ 2398.393538] [<ffffffff815b1c6e>] ? scsi_error_handler+0x69e/0x910
[ 2398.393541] [<ffffffff81089ff8>] ? finish_task_switch+0x118/0x180
[ 2398.393544] [<ffffffff815b15d0>] ? scsi_eh_get_sense+0x300/0x300
[ 2398.393547] [<ffffffff810814de>] ? kthread+0xce/0xf0
[ 2398.393550] [<ffffffff8101be75>] ? sched_clock+0x5/0x10
[ 2398.393553] [<ffffffff81080000>] ? __kernel_text_address+0x50/0x80
[ 2398.393556] [<ffffffff81081410>] ? kthread_create_on_node+0x180/0x180
[ 2398.393559] [<ffffffff8179c97c>] ? ret_from_fork+0x7c/0xb0
[ 2398.393561] [<ffffffff81081410>] ? kthread_create_on_node+0x180/0x180
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment