rektide · September 12, 2015 23:26
diff --git a/displaylink-after-starting b/displaylink-after-starting
 Script started on Sat 12 Sep 2015 05:04:19 PM EDT
 /etc/zsh/zshenv:5: unknown file attribute: #
 /etc/zsh/zshrc:56: bad pattern: (~/.config|/etc/zsh/z.d)
 [1m[7m%[27m[1m[0m                                                                                                                                                                                                                                                                                                                              
 

[0m[27m[24m[J
   16001 15-09-12 17:04:19 -0400 []
   sunstripe:~/[K[?2004hr xxrandr-  -q[?2004l
   17:04:22
 Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
 eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 239mm x 134mm
   1920x1080     59.99*+  59.93    47.99  
   1680x1050     59.95    59.88  
   1600x1024     60.17  
   1400x1050     59.98  
   1280x1024     60.02  
   1440x900      59.89  
   1280x960      60.00  
   1360x768      59.80    59.96  
   1152x864      60.00  
   1024x768      60.00  
   800x600       60.32    56.25  
   640x480       59.94  
 DP1 disconnected (normal left inverted right x axis y axis)
 HDMI1 disconnected (normal left inverted right x axis y axis)
 HDMI2 disconnected (normal left inverted right x axis y axis)
 VIRTUAL1 disconnected (normal left inverted right x axis y axis)
 [1m[7m%[27m[1m[0m                                                                                                                                                                                                                                                                                                                              
 

[0m[27m[24m[J
   16002 15-09-12 17:04:22 -0400 []
   sunstripe:~/[K[?2004hv ccat /var/log/Xorg.0.log[?2004l
   17:04:35
 [     5.672] 
 X.Org X Server 1.17.2
 Release Date: 2015-06-16
 [     5.672] X Protocol Version 11, Revision 0
 [     5.672] Build Operating System: Linux 4.1.0 x86_64 Debian
 [     5.672] Current Operating System: Linux sunstripe 4.1.0-rc6 #3 SMP Fri Jun 12 19:26:46 EDT 2015 x86_64
 [     5.672] Kernel command line: root=PARTUUID=b7f1379f-4d49-4fee-aaf2-60306c5e045a 
 [     5.672] Build Date: 11 August 2015  10:51:15AM
 [     5.672] xorg-server 2:1.17.2-1.1 (http://www.debian.org/support) 
 [     5.672] Current version of pixman: 0.32.6
 [     5.672] 	Before reporting problems, check http://wiki.x.org
 	to make sure that you have the latest version.
 [     5.672] Markers: (--) probed, (**) from config file, (==) default setting,
 	(++) from command line, (!!) notice, (II) informational,
 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
 [     5.673] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 12 17:03:26 2015
 [     5.687] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
 [     5.707] (==) No Layout section.  Using the first Screen section.
 [     5.707] (==) No screen section available. Using defaults.
 [     5.707] (**) |-->Screen "Default Screen Section" (0)
 [     5.707] (**) |   |-->Monitor "<default monitor>"
 [     5.708] (==) No monitor specified for screen "Default Screen Section".
 	Using a default monitor configuration.
 [     5.708] (==) Automatically adding devices
 [     5.708] (==) Automatically enabling devices
 [     5.708] (==) Automatically adding GPU devices
 [     5.713] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
 [     5.713] 	Entry deleted from font path.
 [     5.725] (==) FontPath set to:
 	/usr/share/fonts/X11/misc,
 	/usr/share/fonts/X11/100dpi/:unscaled,
 	/usr/share/fonts/X11/75dpi/:unscaled,
 	/usr/share/fonts/X11/Type1,
 	/usr/share/fonts/X11/100dpi,
 	/usr/share/fonts/X11/75dpi,
 	built-ins
 [     5.725] (==) ModulePath set to "/usr/lib/xorg/modules"
 [     5.725] (II) The server relies on udev to provide the list of input devices.
 	If no devices become available, reconfigure udev or disable AutoAddDevices.
 [     5.725] (II) Loader magic: 0x559081783d40
 [     5.725] (II) Module ABI versions:
 [     5.725] 	X.Org ANSI C Emulation: 0.4
 [     5.725] 	X.Org Video Driver: 19.0
 [     5.725] 	X.Org XInput driver : 21.0
 [     5.725] 	X.Org Server Extension : 9.0
 [     5.726] (II) xfree86: Adding drm device (/dev/dri/card0)
 [     5.734] (--) PCI:*(0:0:2:0) 8086:0a1e:1028:0605 rev 11, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
 [     5.734] (II) LoadModule: "glx"
 [     5.735] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
 [     5.766] (II) Module glx: vendor="X.Org Foundation"
 [     5.766] 	compiled for 1.17.2, module version = 1.0.0
 [     5.766] 	ABI class: X.Org Server Extension, version 9.0
 [     5.766] (==) AIGLX enabled
 [     5.766] (==) Matched intel as autoconfigured driver 0
 [     5.766] (==) Matched intel as autoconfigured driver 1
 [     5.766] (==) Matched modesetting as autoconfigured driver 2
 [     5.766] (==) Matched fbdev as autoconfigured driver 3
 [     5.766] (==) Matched vesa as autoconfigured driver 4
 [     5.766] (==) Assigned the driver to the xf86ConfigLayout
 [     5.766] (II) LoadModule: "intel"
 [     5.773] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
 [     5.787] (II) Module intel: vendor="X.Org Foundation"
 [     5.787] 	compiled for 1.17.2, module version = 2.99.917
 [     5.787] 	Module class: X.Org Video Driver
 [     5.787] 	ABI class: X.Org Video Driver, version 19.0
 [     5.787] (II) LoadModule: "modesetting"
 [     5.787] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
 [     5.789] (II) Module modesetting: vendor="X.Org Foundation"
 [     5.789] 	compiled for 1.17.2, module version = 1.17.2
 [     5.789] 	Module class: X.Org Video Driver
 [     5.789] 	ABI class: X.Org Video Driver, version 19.0
 [     5.789] (II) LoadModule: "fbdev"
 [     5.789] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
 [     5.797] (II) Module fbdev: vendor="X.Org Foundation"
 [     5.797] 	compiled for 1.17.1, module version = 0.4.4
 [     5.797] 	Module class: X.Org Video Driver
 [     5.797] 	ABI class: X.Org Video Driver, version 19.0
 [     5.797] (II) LoadModule: "vesa"
 [     5.797] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
 [     5.798] (II) Module vesa: vendor="X.Org Foundation"
 [     5.798] 	compiled for 1.17.1, module version = 2.3.3
 [     5.798] 	Module class: X.Org Video Driver
 [     5.798] 	ABI class: X.Org Video Driver, version 19.0
 [     5.798] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
 	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
 	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
 	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
 	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
 [     5.799] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
 [     5.799] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
 [     5.799] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
 [     5.799] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
 [     5.799] (II) FBDEV: driver for framebuffer: fbdev
 [     5.799] (II) VESA: driver for VESA chipsets: vesa
 [     5.799] (--) using VT number 2

 [     5.810] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327
 [     5.810] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-2 (Vincent Cheng <[email protected]>)
 [     5.810] (II) intel(0): SNA compiled for use with valgrind
 [     5.810] (WW) Falling back to old probe method for modesetting
 [     5.810] (WW) Falling back to old probe method for fbdev
 [     5.810] (II) Loading sub module "fbdevhw"
 [     5.810] (II) LoadModule: "fbdevhw"
 [     5.812] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
 [     5.816] (II) Module fbdevhw: vendor="X.Org Foundation"
 [     5.816] 	compiled for 1.17.2, module version = 0.0.2
 [     5.816] 	ABI class: X.Org Video Driver, version 19.0
 [     5.816] (WW) Falling back to old probe method for vesa
 [     5.816] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4200
 [     5.816] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
 [     5.816] (II) intel(0): Creating default Display subsection in Screen section
 	"Default Screen Section" for depth/fbbpp 24/32
 [     5.816] (==) intel(0): Depth 24, (--) framebuffer bpp 32
 [     5.816] (==) intel(0): RGB weight 888
 [     5.816] (==) intel(0): Default visual is TrueColor
 [     5.816] (II) intel(0): Output eDP1 has no monitor section
 [     5.816] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
 [     5.816] (II) intel(0): Enabled output eDP1
 [     5.816] (II) intel(0): Output HDMI1 has no monitor section
 [     5.816] (II) intel(0): Enabled output HDMI1
 [     5.816] (II) intel(0): Output DP1 has no monitor section
 [     5.816] (II) intel(0): Enabled output DP1
 [     5.817] (II) intel(0): Output HDMI2 has no monitor section
 [     5.817] (II) intel(0): Enabled output HDMI2
 [     5.817] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
 [     5.817] (II) intel(0): Output VIRTUAL1 has no monitor section
 [     5.817] (II) intel(0): Enabled output VIRTUAL1
 [     5.817] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
 [     5.817] (==) intel(0): TearFree disabled
 [     5.817] (==) intel(0): DPI set to (96, 96)
 [     5.817] (II) Loading sub module "dri2"
 [     5.817] (II) LoadModule: "dri2"
 [     5.817] (II) Module "dri2" already built-in
 [     5.817] (II) Loading sub module "present"
 [     5.817] (II) LoadModule: "present"
 [     5.817] (II) Module "present" already built-in
 [     5.817] (II) UnloadModule: "modesetting"
 [     5.817] (II) Unloading modesetting
 [     5.817] (II) UnloadModule: "fbdev"
 [     5.818] (II) Unloading fbdev
 [     5.818] (II) UnloadSubModule: "fbdevhw"
 [     5.818] (II) Unloading fbdevhw
 [     5.818] (II) UnloadModule: "vesa"
 [     5.818] (II) Unloading vesa
 [     5.818] (==) Depth 24 pixmap format is 32 bpp
 [     5.818] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
 [     5.818] (==) intel(0): Backing store enabled
 [     5.818] (==) intel(0): Silken mouse enabled
 [     5.818] (II) intel(0): HW Cursor enabled
 [     5.818] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
 [     5.818] (==) intel(0): DPMS enabled
 [     5.818] (==) intel(0): display hotplug detection enabled
 [     5.818] (II) intel(0): [DRI2] Setup complete
 [     5.818] (II) intel(0): [DRI2]   DRI driver: i965
 [     5.818] (II) intel(0): [DRI2]   VDPAU driver: i965
 [     5.818] (II) intel(0): direct rendering: DRI2 enabled
 [     5.818] (II) intel(0): hardware support for Present enabled
 [     5.818] (--) RandR disabled
 [     5.827] (II) SELinux: Disabled on system
 [     5.952] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
 [     5.952] (II) AIGLX: enabled GLX_ARB_create_context
 [     5.952] (II) AIGLX: enabled GLX_ARB_create_context_profile
 [     5.952] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
 [     5.952] (II) AIGLX: enabled GLX_INTEL_swap_event
 [     5.952] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
 [     5.952] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
 [     5.952] (II) AIGLX: enabled GLX_ARB_fbconfig_float
 [     5.952] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
 [     5.952] (II) AIGLX: enabled GLX_ARB_create_context_robustness
 [     5.952] (II) AIGLX: Loaded and initialized i965
 [     5.952] (II) GLX: Initialized DRI2 GL provider for screen 0
 [     5.957] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
 [     5.975] (II) intel(0): Setting screen physical size to 508 x 285
 [     6.118] (II) config/udev: Adding input device Power Button (/dev/input/event3)
 [     6.119] (**) Power Button: Applying InputClass "evdev keyboard catchall"
 [     6.119] (**) Power Button: Applying InputClass "libinput"
 [     6.119] (II) LoadModule: "libinput"
 [     6.119] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
 [     6.171] (II) Module libinput: vendor="X.Org Foundation"
 [     6.171] 	compiled for 1.17.2, module version = 0.13.0
 [     6.171] 	Module class: X.Org XInput Driver
 [     6.171] 	ABI class: X.Org XInput driver, version 21.0
 [     6.171] (II) Using input driver 'libinput' for 'Power Button'
 [     6.171] (**) Power Button: always reports core events
 [     6.171] (**) Option "Device" "/dev/input/event3"
 [     6.171] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
 [     6.171] (II) input device 'Power Button', /dev/input/event3 is a keyboard
 [     6.190] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
 [     6.190] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
 [     6.190] (**) Option "xkb_model" "pc105"
 [     6.190] (**) Option "xkb_layout" "us"
 [     6.191] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
 [     6.191] (II) input device 'Power Button', /dev/input/event3 is a keyboard
 [     6.192] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
 [     6.192] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
 [     6.192] (**) Video Bus: Applying InputClass "libinput"
 [     6.192] (II) Using input driver 'libinput' for 'Video Bus'
 [     6.192] (**) Video Bus: always reports core events
 [     6.192] (**) Option "Device" "/dev/input/event4"
 [     6.192] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
 [     6.192] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
 [     6.200] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
 [     6.200] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
 [     6.200] (**) Option "xkb_model" "pc105"
 [     6.200] (**) Option "xkb_layout" "us"
 [     6.201] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
 [     6.201] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
 [     6.201] (II) config/udev: Adding input device Power Button (/dev/input/event2)
 [     6.201] (**) Power Button: Applying InputClass "evdev keyboard catchall"
 [     6.201] (**) Power Button: Applying InputClass "libinput"
 [     6.201] (II) Using input driver 'libinput' for 'Power Button'
 [     6.201] (**) Power Button: always reports core events
 [     6.201] (**) Option "Device" "/dev/input/event2"
 [     6.202] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
 [     6.202] (II) input device 'Power Button', /dev/input/event2 is a keyboard
 [     6.220] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
 [     6.220] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
 [     6.220] (**) Option "xkb_model" "pc105"
 [     6.220] (**) Option "xkb_layout" "us"
 [     6.220] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
 [     6.220] (II) input device 'Power Button', /dev/input/event2 is a keyboard
 [     6.221] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
 [     6.221] (**) Lid Switch: Applying InputClass "libinput"
 [     6.221] (II) Using input driver 'libinput' for 'Lid Switch'
 [     6.221] (**) Lid Switch: always reports core events
 [     6.221] (**) Option "Device" "/dev/input/event1"
 [     6.221] (II) input device 'Lid Switch', /dev/input/event1 not tagged as input device
 [     6.250] (II) failed to create input device '/dev/input/event1'.
 [     6.250] (EE) libinput: Lid Switch: Failed to create a device for /dev/input/event1
 [     6.250] (EE) PreInit returned 2 for "Lid Switch"
 [     6.250] (II) UnloadModule: "libinput"
 [     6.251] (II) config/udev: Adding input device Synaptics T Pad V 01.31 UNKNOWN (/dev/input/event11)
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "evdev touchpad catchall"
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "Multitouch Touchpad"
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "touchpad catchall"
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "Default clickpad buttons"
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "libinput"
 [     6.251] (II) Using input driver 'libinput' for 'Synaptics T Pad V 01.31 UNKNOWN'
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: always reports core events
 [     6.251] (**) Option "Device" "/dev/input/event11"
 [     6.303] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is tagged by udev as: Touchpad
 [     6.303] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is a touchpad
 [     6.336] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:06CB:2819.0002/input/input11/event11"
 [     6.336] (II) XINPUT: Adding extended input device "Synaptics T Pad V 01.31 UNKNOWN" (type: TOUCHPAD, id 9)
 [     6.337] (**) Option "AccelerationScheme" "none"
 [     6.337] (**) Synaptics T Pad V 01.31 UNKNOWN: (accel) selected scheme none/0
 [     6.337] (**) Synaptics T Pad V 01.31 UNKNOWN: (accel) acceleration factor: 2.000
 [     6.337] (**) Synaptics T Pad V 01.31 UNKNOWN: (accel) acceleration threshold: 4
 [     6.390] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is tagged by udev as: Touchpad
 [     6.390] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is a touchpad
 [     6.391] (II) config/udev: Adding input device Synaptics T Pad V 01.31 UNKNOWN (/dev/input/mouse0)
 [     6.391] (**) Synaptics T Pad V 01.31 UNKNOWN: Ignoring device from InputClass "touchpad ignore duplicates"
 [     6.391] (II) config/udev: Adding input device Synaptics T Pad V 01.31 (/dev/input/event10)
 [     6.392] (**) Synaptics T Pad V 01.31: Applying InputClass "evdev keyboard catchall"
 [     6.392] (**) Synaptics T Pad V 01.31: Applying InputClass "libinput"
 [     6.392] (II) Using input driver 'libinput' for 'Synaptics T Pad V 01.31'
 [     6.392] (**) Synaptics T Pad V 01.31: always reports core events
 [     6.392] (**) Option "Device" "/dev/input/event10"
 [     6.392] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is tagged by udev as: Keyboard
 [     6.392] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is a keyboard
 [     6.400] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:06CB:2819.0003/input/input10/event10"
 [     6.400] (II) XINPUT: Adding extended input device "Synaptics T Pad V 01.31" (type: KEYBOARD, id 10)
 [     6.400] (**) Option "xkb_model" "pc105"
 [     6.400] (**) Option "xkb_layout" "us"
 [     6.401] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is tagged by udev as: Keyboard
 [     6.401] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is a keyboard
 [     6.402] (II) config/udev: Adding input device Synaptics T Pad V 01.31 (/dev/input/event12)
 [     6.402] (**) Synaptics T Pad V 01.31: Applying InputClass "evdev keyboard catchall"
 [     6.402] (**) Synaptics T Pad V 01.31: Applying InputClass "libinput"
 [     6.402] (II) Using input driver 'libinput' for 'Synaptics T Pad V 01.31'
 [     6.402] (**) Synaptics T Pad V 01.31: always reports core events
 [     6.402] (**) Option "Device" "/dev/input/event12"
 [     6.402] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is tagged by udev as: Keyboard
 [     6.402] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is a keyboard
 [     6.434] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:06CB:2819.0004/input/input13/event12"
 [     6.434] (II) XINPUT: Adding extended input device "Synaptics T Pad V 01.31" (type: KEYBOARD, id 11)
 [     6.434] (**) Option "xkb_model" "pc105"
 [     6.434] (**) Option "xkb_layout" "us"
 [     6.435] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is tagged by udev as: Keyboard
 [     6.435] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is a keyboard
 [     6.436] (II) config/udev: Adding input device UVC Camera (114d:1000) (/dev/input/event9)
 [     6.436] (**) UVC Camera (114d:1000): Applying InputClass "evdev keyboard catchall"
 [     6.436] (**) UVC Camera (114d:1000): Applying InputClass "libinput"
 [     6.436] (II) Using input driver 'libinput' for 'UVC Camera (114d:1000)'
 [     6.436] (**) UVC Camera (114d:1000): always reports core events
 [     6.436] (**) Option "Device" "/dev/input/event9"
 [     6.436] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is tagged by udev as: Keyboard
 [     6.436] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is a keyboard
 [     6.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9/event9"
 [     6.480] (II) XINPUT: Adding extended input device "UVC Camera (114d:1000)" (type: KEYBOARD, id 12)
 [     6.480] (**) Option "xkb_model" "pc105"
 [     6.480] (**) Option "xkb_layout" "us"
 [     6.487] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is tagged by udev as: Keyboard
 [     6.487] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is a keyboard
 [     6.487] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event5)
 [     6.488] (**) HDA Intel PCH Dock Headphone: Applying InputClass "libinput"
 [     6.488] (II) Using input driver 'libinput' for 'HDA Intel PCH Dock Headphone'
 [     6.488] (**) HDA Intel PCH Dock Headphone: always reports core events
 [     6.488] (**) Option "Device" "/dev/input/event5"
 [     6.488] (II) input device 'HDA Intel PCH Dock Headphone', /dev/input/event5 not tagged as input device
 [     6.503] (II) failed to create input device '/dev/input/event5'.
 [     6.503] (EE) libinput: HDA Intel PCH Dock Headphone: Failed to create a device for /dev/input/event5
 [     6.503] (EE) PreInit returned 2 for "HDA Intel PCH Dock Headphone"
 [     6.503] (II) UnloadModule: "libinput"
 [     6.510] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
 [     6.510] (**) HDA Intel PCH Headphone: Applying InputClass "libinput"
 [     6.510] (II) Using input driver 'libinput' for 'HDA Intel PCH Headphone'
 [     6.510] (**) HDA Intel PCH Headphone: always reports core events
 [     6.510] (**) Option "Device" "/dev/input/event6"
 [     6.510] (II) input device 'HDA Intel PCH Headphone', /dev/input/event6 not tagged as input device
 [     6.530] (II) failed to create input device '/dev/input/event6'.
 [     6.530] (EE) libinput: HDA Intel PCH Headphone: Failed to create a device for /dev/input/event6
 [     6.530] (EE) PreInit returned 2 for "HDA Intel PCH Headphone"
 [     6.530] (II) UnloadModule: "libinput"
 [     6.531] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
 [     6.531] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
 [     6.531] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput"
 [     6.531] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
 [     6.531] (**) AT Translated Set 2 keyboard: always reports core events
 [     6.531] (**) Option "Device" "/dev/input/event0"
 [     6.531] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
 [     6.531] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
 [     6.545] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
 [     6.545] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
 [     6.545] (**) Option "xkb_model" "pc105"
 [     6.545] (**) Option "xkb_layout" "us"
 [     6.546] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
 [     6.546] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
 [     6.546] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
 [     6.546] (**) PC Speaker: Applying InputClass "libinput"
 [     6.546] (II) Using input driver 'libinput' for 'PC Speaker'
 [     6.546] (**) PC Speaker: always reports core events
 [     6.546] (**) Option "Device" "/dev/input/event7"
 [     6.547] (II) input device 'PC Speaker', /dev/input/event7 not tagged as input device
 [     6.607] (II) failed to create input device '/dev/input/event7'.
 [     6.607] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event7
 [     6.607] (EE) PreInit returned 2 for "PC Speaker"
 [     6.607] (II) UnloadModule: "libinput"
 [     6.608] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
 [     6.608] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
 [     6.608] (**) Dell WMI hotkeys: Applying InputClass "libinput"
 [     6.608] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
 [     6.608] (**) Dell WMI hotkeys: always reports core events
 [     6.608] (**) Option "Device" "/dev/input/event8"
 [     6.608] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
 [     6.608] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is a keyboard
 [     6.630] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
 [     6.630] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
 [     6.630] (**) Option "xkb_model" "pc105"
 [     6.630] (**) Option "xkb_layout" "us"
 [     6.630] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
 [     6.630] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is a keyboard
 [    12.426] (II) intel(0): EDID vendor "SDC", prod id 19528
 [    12.426] (II) intel(0): Printing DDC gathered Modelines:
 [    12.426] (II) intel(0): Modeline "1920x1080"x0.0  136.50  1920 1952 1984 2048  1080 1082 1085 1111 +hsync -vsync (66.7 kHz eP)
 [    12.427] (II) intel(0): Modeline "1920x1080"x0.0  109.20  1920 1952 1984 2048  1080 1082 1085 1111 +hsync -vsync (53.3 kHz e)
 [    42.725] (II) config/udev: removing GPU device /sys/devices/platform/evdi.0/drm/card1 /dev/dri/card1
 [    42.725] (II) config/udev: Adding drm device (/dev/dri/card1)
 [    42.725] (II) xfree86: Adding drm device (/dev/dri/card1)
 [    42.726] (II) LoadModule: "modesetting"
 [    42.726] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
 [    42.726] (II) Module modesetting: vendor="X.Org Foundation"
 [    42.726] 	compiled for 1.17.2, module version = 1.17.2
 [    42.726] 	Module class: X.Org Video Driver
 [    42.726] 	ABI class: X.Org Video Driver, version 19.0
 [    42.726] (II) modeset(G0): using drv /dev/dri/card1
 [    42.727] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
 [    42.727] (==) modeset(G0): RGB weight 888
 [    42.727] (==) modeset(G0): Default visual is TrueColor
 [    42.727] (II) Loading sub module "glamoregl"
 [    42.727] (II) LoadModule: "glamoregl"
 [    42.727] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
 [    42.739] (II) Module glamoregl: vendor="X.Org Foundation"
 [    42.739] 	compiled for 1.17.2, module version = 1.0.0
 [    42.739] 	ABI class: X.Org ANSI C Emulation, version 0.4
 [    42.739] (II) glamor: OpenGL accelerated X.org driver based.
 [    42.870] (II) glamor: EGL version 1.4 (DRI2):
 [    42.870] EGL_MESA_drm_image required.
 [    42.870] (EE) modeset(G0): glamor initialization failed
 [    42.870] (II) modeset(G0): ShadowFB: preferred NO, enabled NO
 [    42.870] (II) modeset(G0): Output DVI-1-0 has no monitor section
 [    42.870] (II) modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
 [    42.870] (**) modeset(G0): Display dimensions: (240, 130) mm
 [    42.870] (**) modeset(G0): DPI set to (108, 150)
 [    42.870] (II) Loading sub module "fb"
 [    42.870] (II) LoadModule: "fb"
 [    42.870] (II) Loading /usr/lib/xorg/modules/libfb.so
 [    42.872] (II) Module fb: vendor="X.Org Foundation"
 [    42.872] 	compiled for 1.17.2, module version = 1.0.0
 [    42.872] 	ABI class: X.Org ANSI C Emulation, version 0.4
 [    42.872] (==) modeset(G0): Backing store enabled
 [    42.872] (==) modeset(G0): Silken mouse enabled
 [    42.872] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
 [    42.872] (==) modeset(G0): DPMS enabled
 [    42.873] (II) modeset(G0): Damage tracking initialized
 [    42.873] xf86: found device 2
 [    42.988] (II) modeset(G0): EDID vendor "HWP", prod id 9846
 [    42.988] (II) modeset(G0): Using hsync ranges from config file
 [    42.988] (II) modeset(G0): Using vrefresh ranges from config file
 [    42.988] (II) modeset(G0): Printing DDC gathered Modelines:
 [    42.988] (II) modeset(G0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
 [    42.988] (II) modeset(G0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
 [    42.988] (II) modeset(G0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
 [    42.988] (II) modeset(G0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
 [    42.989] (II) modeset(G0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
 [    42.989] (II) modeset(G0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
 [    42.989] (II) modeset(G0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
 [    42.989] (II) modeset(G0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
 [    42.989] (II) modeset(G0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
 [    42.989] (II) modeset(G0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
 [    42.989] (II) modeset(G0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
 [    42.989] (II) modeset(G0): Modeline "1280x1024"x0.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
 [    42.989] (II) modeset(G0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
 [    42.989] (II) modeset(G0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
 [    42.989] (II) modeset(G0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
 [    42.989] (II) modeset(G0): Modeline "1920x1200"x0.0  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
 [1m[7m%[27m[1m[0m                                                                                                                                                                                                                                                                                                                              
 

[0m[27m[24m[J
   16003 15-09-12 17:04:35 -0400 []
   sunstripe:~/[K[?2004heexit[?2004l
   17:04:42

 Script done on Sat 12 Sep 2015 05:04:42 PM EDT
diff --git a/displaylink-not-present b/displaylink-not-present
 Script started on Sat 12 Sep 2015 05:03:42 PM EDT
 /etc/zsh/zshenv:5: unknown file attribute: #
 /etc/zsh/zshrc:56: bad pattern: (~/.config|/etc/zsh/z.d)
 [1m[7m%[27m[1m[0m                                                                                                                                                                                                                                                                                                                              
 

[0m[27m[24m[J
   16010 15-09-12 17:03:42 -0400 []
   sunstripe:~/[K[?2004hccat xrandr       c  xxrandr -q[?2004l
   17:03:51
 Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
 eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 239mm x 134mm
   1920x1080     59.99*+  59.93    47.99  
   1680x1050     59.95    59.88  
   1600x1024     60.17  
   1400x1050     59.98  
   1280x1024     60.02  
   1440x900      59.89  
   1280x960      60.00  
   1360x768      59.80    59.96  
   1152x864      60.00  
   1024x768      60.00  
   800x600       60.32    56.25  
   640x480       59.94  
 DP1 disconnected (normal left inverted right x axis y axis)
 HDMI1 disconnected (normal left inverted right x axis y axis)
 HDMI2 disconnected (normal left inverted right x axis y axis)
 VIRTUAL1 disconnected (normal left inverted right x axis y axis)
 [1m[7m%[27m[1m[0m                                                                                                                                                                                                                                                                                                                              
 

[0m[27m[24m[J
   16011 15-09-12 17:03:51 -0400 []
   sunstripe:~/[K[?2004hccat /a var/log/Xorg.0.log[?2004l
   17:03:55
 [     5.672] 
 X.Org X Server 1.17.2
 Release Date: 2015-06-16
 [     5.672] X Protocol Version 11, Revision 0
 [     5.672] Build Operating System: Linux 4.1.0 x86_64 Debian
 [     5.672] Current Operating System: Linux sunstripe 4.1.0-rc6 #3 SMP Fri Jun 12 19:26:46 EDT 2015 x86_64
 [     5.672] Kernel command line: root=PARTUUID=b7f1379f-4d49-4fee-aaf2-60306c5e045a 
 [     5.672] Build Date: 11 August 2015  10:51:15AM
 [     5.672] xorg-server 2:1.17.2-1.1 (http://www.debian.org/support) 
 [     5.672] Current version of pixman: 0.32.6
 [     5.672] 	Before reporting problems, check http://wiki.x.org
 	to make sure that you have the latest version.
 [     5.672] Markers: (--) probed, (**) from config file, (==) default setting,
 	(++) from command line, (!!) notice, (II) informational,
 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
 [     5.673] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 12 17:03:26 2015
 [     5.687] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
 [     5.707] (==) No Layout section.  Using the first Screen section.
 [     5.707] (==) No screen section available. Using defaults.
 [     5.707] (**) |-->Screen "Default Screen Section" (0)
 [     5.707] (**) |   |-->Monitor "<default monitor>"
 [     5.708] (==) No monitor specified for screen "Default Screen Section".
 	Using a default monitor configuration.
 [     5.708] (==) Automatically adding devices
 [     5.708] (==) Automatically enabling devices
 [     5.708] (==) Automatically adding GPU devices
 [     5.713] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
 [     5.713] 	Entry deleted from font path.
 [     5.725] (==) FontPath set to:
 	/usr/share/fonts/X11/misc,
 	/usr/share/fonts/X11/100dpi/:unscaled,
 	/usr/share/fonts/X11/75dpi/:unscaled,
 	/usr/share/fonts/X11/Type1,
 	/usr/share/fonts/X11/100dpi,
 	/usr/share/fonts/X11/75dpi,
 	built-ins
 [     5.725] (==) ModulePath set to "/usr/lib/xorg/modules"
 [     5.725] (II) The server relies on udev to provide the list of input devices.
 	If no devices become available, reconfigure udev or disable AutoAddDevices.
 [     5.725] (II) Loader magic: 0x559081783d40
 [     5.725] (II) Module ABI versions:
 [     5.725] 	X.Org ANSI C Emulation: 0.4
 [     5.725] 	X.Org Video Driver: 19.0
 [     5.725] 	X.Org XInput driver : 21.0
 [     5.725] 	X.Org Server Extension : 9.0
 [     5.726] (II) xfree86: Adding drm device (/dev/dri/card0)
 [     5.734] (--) PCI:*(0:0:2:0) 8086:0a1e:1028:0605 rev 11, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
 [     5.734] (II) LoadModule: "glx"
 [     5.735] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
 [     5.766] (II) Module glx: vendor="X.Org Foundation"
 [     5.766] 	compiled for 1.17.2, module version = 1.0.0
 [     5.766] 	ABI class: X.Org Server Extension, version 9.0
 [     5.766] (==) AIGLX enabled
 [     5.766] (==) Matched intel as autoconfigured driver 0
 [     5.766] (==) Matched intel as autoconfigured driver 1
 [     5.766] (==) Matched modesetting as autoconfigured driver 2
 [     5.766] (==) Matched fbdev as autoconfigured driver 3
 [     5.766] (==) Matched vesa as autoconfigured driver 4
 [     5.766] (==) Assigned the driver to the xf86ConfigLayout
 [     5.766] (II) LoadModule: "intel"
 [     5.773] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
 [     5.787] (II) Module intel: vendor="X.Org Foundation"
 [     5.787] 	compiled for 1.17.2, module version = 2.99.917
 [     5.787] 	Module class: X.Org Video Driver
 [     5.787] 	ABI class: X.Org Video Driver, version 19.0
 [     5.787] (II) LoadModule: "modesetting"
 [     5.787] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
 [     5.789] (II) Module modesetting: vendor="X.Org Foundation"
 [     5.789] 	compiled for 1.17.2, module version = 1.17.2
 [     5.789] 	Module class: X.Org Video Driver
 [     5.789] 	ABI class: X.Org Video Driver, version 19.0
 [     5.789] (II) LoadModule: "fbdev"
 [     5.789] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
 [     5.797] (II) Module fbdev: vendor="X.Org Foundation"
 [     5.797] 	compiled for 1.17.1, module version = 0.4.4
 [     5.797] 	Module class: X.Org Video Driver
 [     5.797] 	ABI class: X.Org Video Driver, version 19.0
 [     5.797] (II) LoadModule: "vesa"
 [     5.797] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
 [     5.798] (II) Module vesa: vendor="X.Org Foundation"
 [     5.798] 	compiled for 1.17.1, module version = 2.3.3
 [     5.798] 	Module class: X.Org Video Driver
 [     5.798] 	ABI class: X.Org Video Driver, version 19.0
 [     5.798] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
 	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
 	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
 	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
 	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
 [     5.799] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
 [     5.799] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
 [     5.799] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
 [     5.799] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
 [     5.799] (II) FBDEV: driver for framebuffer: fbdev
 [     5.799] (II) VESA: driver for VESA chipsets: vesa
 [     5.799] (--) using VT number 2

 [     5.810] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327
 [     5.810] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-2 (Vincent Cheng <[email protected]>)
 [     5.810] (II) intel(0): SNA compiled for use with valgrind
 [     5.810] (WW) Falling back to old probe method for modesetting
 [     5.810] (WW) Falling back to old probe method for fbdev
 [     5.810] (II) Loading sub module "fbdevhw"
 [     5.810] (II) LoadModule: "fbdevhw"
 [     5.812] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
 [     5.816] (II) Module fbdevhw: vendor="X.Org Foundation"
 [     5.816] 	compiled for 1.17.2, module version = 0.0.2
 [     5.816] 	ABI class: X.Org Video Driver, version 19.0
 [     5.816] (WW) Falling back to old probe method for vesa
 [     5.816] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4200
 [     5.816] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
 [     5.816] (II) intel(0): Creating default Display subsection in Screen section
 	"Default Screen Section" for depth/fbbpp 24/32
 [     5.816] (==) intel(0): Depth 24, (--) framebuffer bpp 32
 [     5.816] (==) intel(0): RGB weight 888
 [     5.816] (==) intel(0): Default visual is TrueColor
 [     5.816] (II) intel(0): Output eDP1 has no monitor section
 [     5.816] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
 [     5.816] (II) intel(0): Enabled output eDP1
 [     5.816] (II) intel(0): Output HDMI1 has no monitor section
 [     5.816] (II) intel(0): Enabled output HDMI1
 [     5.816] (II) intel(0): Output DP1 has no monitor section
 [     5.816] (II) intel(0): Enabled output DP1
 [     5.817] (II) intel(0): Output HDMI2 has no monitor section
 [     5.817] (II) intel(0): Enabled output HDMI2
 [     5.817] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
 [     5.817] (II) intel(0): Output VIRTUAL1 has no monitor section
 [     5.817] (II) intel(0): Enabled output VIRTUAL1
 [     5.817] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
 [     5.817] (==) intel(0): TearFree disabled
 [     5.817] (==) intel(0): DPI set to (96, 96)
 [     5.817] (II) Loading sub module "dri2"
 [     5.817] (II) LoadModule: "dri2"
 [     5.817] (II) Module "dri2" already built-in
 [     5.817] (II) Loading sub module "present"
 [     5.817] (II) LoadModule: "present"
 [     5.817] (II) Module "present" already built-in
 [     5.817] (II) UnloadModule: "modesetting"
 [     5.817] (II) Unloading modesetting
 [     5.817] (II) UnloadModule: "fbdev"
 [     5.818] (II) Unloading fbdev
 [     5.818] (II) UnloadSubModule: "fbdevhw"
 [     5.818] (II) Unloading fbdevhw
 [     5.818] (II) UnloadModule: "vesa"
 [     5.818] (II) Unloading vesa
 [     5.818] (==) Depth 24 pixmap format is 32 bpp
 [     5.818] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
 [     5.818] (==) intel(0): Backing store enabled
 [     5.818] (==) intel(0): Silken mouse enabled
 [     5.818] (II) intel(0): HW Cursor enabled
 [     5.818] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
 [     5.818] (==) intel(0): DPMS enabled
 [     5.818] (==) intel(0): display hotplug detection enabled
 [     5.818] (II) intel(0): [DRI2] Setup complete
 [     5.818] (II) intel(0): [DRI2]   DRI driver: i965
 [     5.818] (II) intel(0): [DRI2]   VDPAU driver: i965
 [     5.818] (II) intel(0): direct rendering: DRI2 enabled
 [     5.818] (II) intel(0): hardware support for Present enabled
 [     5.818] (--) RandR disabled
 [     5.827] (II) SELinux: Disabled on system
 [     5.952] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
 [     5.952] (II) AIGLX: enabled GLX_ARB_create_context
 [     5.952] (II) AIGLX: enabled GLX_ARB_create_context_profile
 [     5.952] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
 [     5.952] (II) AIGLX: enabled GLX_INTEL_swap_event
 [     5.952] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
 [     5.952] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
 [     5.952] (II) AIGLX: enabled GLX_ARB_fbconfig_float
 [     5.952] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
 [     5.952] (II) AIGLX: enabled GLX_ARB_create_context_robustness
 [     5.952] (II) AIGLX: Loaded and initialized i965
 [     5.952] (II) GLX: Initialized DRI2 GL provider for screen 0
 [     5.957] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
 [     5.975] (II) intel(0): Setting screen physical size to 508 x 285
 [     6.118] (II) config/udev: Adding input device Power Button (/dev/input/event3)
 [     6.119] (**) Power Button: Applying InputClass "evdev keyboard catchall"
 [     6.119] (**) Power Button: Applying InputClass "libinput"
 [     6.119] (II) LoadModule: "libinput"
 [     6.119] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
 [     6.171] (II) Module libinput: vendor="X.Org Foundation"
 [     6.171] 	compiled for 1.17.2, module version = 0.13.0
 [     6.171] 	Module class: X.Org XInput Driver
 [     6.171] 	ABI class: X.Org XInput driver, version 21.0
 [     6.171] (II) Using input driver 'libinput' for 'Power Button'
 [     6.171] (**) Power Button: always reports core events
 [     6.171] (**) Option "Device" "/dev/input/event3"
 [     6.171] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
 [     6.171] (II) input device 'Power Button', /dev/input/event3 is a keyboard
 [     6.190] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
 [     6.190] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
 [     6.190] (**) Option "xkb_model" "pc105"
 [     6.190] (**) Option "xkb_layout" "us"
 [     6.191] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
 [     6.191] (II) input device 'Power Button', /dev/input/event3 is a keyboard
 [     6.192] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
 [     6.192] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
 [     6.192] (**) Video Bus: Applying InputClass "libinput"
 [     6.192] (II) Using input driver 'libinput' for 'Video Bus'
 [     6.192] (**) Video Bus: always reports core events
 [     6.192] (**) Option "Device" "/dev/input/event4"
 [     6.192] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
 [     6.192] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
 [     6.200] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
 [     6.200] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
 [     6.200] (**) Option "xkb_model" "pc105"
 [     6.200] (**) Option "xkb_layout" "us"
 [     6.201] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
 [     6.201] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
 [     6.201] (II) config/udev: Adding input device Power Button (/dev/input/event2)
 [     6.201] (**) Power Button: Applying InputClass "evdev keyboard catchall"
 [     6.201] (**) Power Button: Applying InputClass "libinput"
 [     6.201] (II) Using input driver 'libinput' for 'Power Button'
 [     6.201] (**) Power Button: always reports core events
 [     6.201] (**) Option "Device" "/dev/input/event2"
 [     6.202] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
 [     6.202] (II) input device 'Power Button', /dev/input/event2 is a keyboard
 [     6.220] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
 [     6.220] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
 [     6.220] (**) Option "xkb_model" "pc105"
 [     6.220] (**) Option "xkb_layout" "us"
 [     6.220] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
 [     6.220] (II) input device 'Power Button', /dev/input/event2 is a keyboard
 [     6.221] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
 [     6.221] (**) Lid Switch: Applying InputClass "libinput"
 [     6.221] (II) Using input driver 'libinput' for 'Lid Switch'
 [     6.221] (**) Lid Switch: always reports core events
 [     6.221] (**) Option "Device" "/dev/input/event1"
 [     6.221] (II) input device 'Lid Switch', /dev/input/event1 not tagged as input device
 [     6.250] (II) failed to create input device '/dev/input/event1'.
 [     6.250] (EE) libinput: Lid Switch: Failed to create a device for /dev/input/event1
 [     6.250] (EE) PreInit returned 2 for "Lid Switch"
 [     6.250] (II) UnloadModule: "libinput"
 [     6.251] (II) config/udev: Adding input device Synaptics T Pad V 01.31 UNKNOWN (/dev/input/event11)
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "evdev touchpad catchall"
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "Multitouch Touchpad"
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "touchpad catchall"
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "Default clickpad buttons"
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "libinput"
 [     6.251] (II) Using input driver 'libinput' for 'Synaptics T Pad V 01.31 UNKNOWN'
 [     6.251] (**) Synaptics T Pad V 01.31 UNKNOWN: always reports core events
 [     6.251] (**) Option "Device" "/dev/input/event11"
 [     6.303] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is tagged by udev as: Touchpad
 [     6.303] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is a touchpad
 [     6.336] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:06CB:2819.0002/input/input11/event11"
 [     6.336] (II) XINPUT: Adding extended input device "Synaptics T Pad V 01.31 UNKNOWN" (type: TOUCHPAD, id 9)
 [     6.337] (**) Option "AccelerationScheme" "none"
 [     6.337] (**) Synaptics T Pad V 01.31 UNKNOWN: (accel) selected scheme none/0
 [     6.337] (**) Synaptics T Pad V 01.31 UNKNOWN: (accel) acceleration factor: 2.000
 [     6.337] (**) Synaptics T Pad V 01.31 UNKNOWN: (accel) acceleration threshold: 4
 [     6.390] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is tagged by udev as: Touchpad
 [     6.390] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is a touchpad
 [     6.391] (II) config/udev: Adding input device Synaptics T Pad V 01.31 UNKNOWN (/dev/input/mouse0)
 [     6.391] (**) Synaptics T Pad V 01.31 UNKNOWN: Ignoring device from InputClass "touchpad ignore duplicates"
 [     6.391] (II) config/udev: Adding input device Synaptics T Pad V 01.31 (/dev/input/event10)
 [     6.392] (**) Synaptics T Pad V 01.31: Applying InputClass "evdev keyboard catchall"
 [     6.392] (**) Synaptics T Pad V 01.31: Applying InputClass "libinput"
 [     6.392] (II) Using input driver 'libinput' for 'Synaptics T Pad V 01.31'
 [     6.392] (**) Synaptics T Pad V 01.31: always reports core events
 [     6.392] (**) Option "Device" "/dev/input/event10"
 [     6.392] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is tagged by udev as: Keyboard
 [     6.392] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is a keyboard
 [     6.400] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:06CB:2819.0003/input/input10/event10"
 [     6.400] (II) XINPUT: Adding extended input device "Synaptics T Pad V 01.31" (type: KEYBOARD, id 10)
 [     6.400] (**) Option "xkb_model" "pc105"
 [     6.400] (**) Option "xkb_layout" "us"
 [     6.401] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is tagged by udev as: Keyboard
 [     6.401] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is a keyboard
 [     6.402] (II) config/udev: Adding input device Synaptics T Pad V 01.31 (/dev/input/event12)
 [     6.402] (**) Synaptics T Pad V 01.31: Applying InputClass "evdev keyboard catchall"
 [     6.402] (**) Synaptics T Pad V 01.31: Applying InputClass "libinput"
 [     6.402] (II) Using input driver 'libinput' for 'Synaptics T Pad V 01.31'
 [     6.402] (**) Synaptics T Pad V 01.31: always reports core events
 [     6.402] (**) Option "Device" "/dev/input/event12"
 [     6.402] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is tagged by udev as: Keyboard
 [     6.402] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is a keyboard
 [     6.434] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:06CB:2819.0004/input/input13/event12"
 [     6.434] (II) XINPUT: Adding extended input device "Synaptics T Pad V 01.31" (type: KEYBOARD, id 11)
 [     6.434] (**) Option "xkb_model" "pc105"
 [     6.434] (**) Option "xkb_layout" "us"
 [     6.435] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is tagged by udev as: Keyboard
 [     6.435] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is a keyboard
 [     6.436] (II) config/udev: Adding input device UVC Camera (114d:1000) (/dev/input/event9)
 [     6.436] (**) UVC Camera (114d:1000): Applying InputClass "evdev keyboard catchall"
 [     6.436] (**) UVC Camera (114d:1000): Applying InputClass "libinput"
 [     6.436] (II) Using input driver 'libinput' for 'UVC Camera (114d:1000)'
 [     6.436] (**) UVC Camera (114d:1000): always reports core events
 [     6.436] (**) Option "Device" "/dev/input/event9"
 [     6.436] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is tagged by udev as: Keyboard
 [     6.436] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is a keyboard
 [     6.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9/event9"
 [     6.480] (II) XINPUT: Adding extended input device "UVC Camera (114d:1000)" (type: KEYBOARD, id 12)
 [     6.480] (**) Option "xkb_model" "pc105"
 [     6.480] (**) Option "xkb_layout" "us"
 [     6.487] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is tagged by udev as: Keyboard
 [     6.487] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is a keyboard
 [     6.487] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event5)
 [     6.488] (**) HDA Intel PCH Dock Headphone: Applying InputClass "libinput"
 [     6.488] (II) Using input driver 'libinput' for 'HDA Intel PCH Dock Headphone'
 [     6.488] (**) HDA Intel PCH Dock Headphone: always reports core events
 [     6.488] (**) Option "Device" "/dev/input/event5"
 [     6.488] (II) input device 'HDA Intel PCH Dock Headphone', /dev/input/event5 not tagged as input device
 [     6.503] (II) failed to create input device '/dev/input/event5'.
 [     6.503] (EE) libinput: HDA Intel PCH Dock Headphone: Failed to create a device for /dev/input/event5
 [     6.503] (EE) PreInit returned 2 for "HDA Intel PCH Dock Headphone"
 [     6.503] (II) UnloadModule: "libinput"
 [     6.510] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
 [     6.510] (**) HDA Intel PCH Headphone: Applying InputClass "libinput"
 [     6.510] (II) Using input driver 'libinput' for 'HDA Intel PCH Headphone'
 [     6.510] (**) HDA Intel PCH Headphone: always reports core events
 [     6.510] (**) Option "Device" "/dev/input/event6"
 [     6.510] (II) input device 'HDA Intel PCH Headphone', /dev/input/event6 not tagged as input device
 [     6.530] (II) failed to create input device '/dev/input/event6'.
 [     6.530] (EE) libinput: HDA Intel PCH Headphone: Failed to create a device for /dev/input/event6
 [     6.530] (EE) PreInit returned 2 for "HDA Intel PCH Headphone"
 [     6.530] (II) UnloadModule: "libinput"
 [     6.531] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
 [     6.531] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
 [     6.531] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput"
 [     6.531] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
 [     6.531] (**) AT Translated Set 2 keyboard: always reports core events
 [     6.531] (**) Option "Device" "/dev/input/event0"
 [     6.531] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
 [     6.531] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
 [     6.545] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
 [     6.545] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
 [     6.545] (**) Option "xkb_model" "pc105"
 [     6.545] (**) Option "xkb_layout" "us"
 [     6.546] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
 [     6.546] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
 [     6.546] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
 [     6.546] (**) PC Speaker: Applying InputClass "libinput"
 [     6.546] (II) Using input driver 'libinput' for 'PC Speaker'
 [     6.546] (**) PC Speaker: always reports core events
 [     6.546] (**) Option "Device" "/dev/input/event7"
 [     6.547] (II) input device 'PC Speaker', /dev/input/event7 not tagged as input device
 [     6.607] (II) failed to create input device '/dev/input/event7'.
 [     6.607] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event7
 [     6.607] (EE) PreInit returned 2 for "PC Speaker"
 [     6.607] (II) UnloadModule: "libinput"
 [     6.608] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
 [     6.608] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
 [     6.608] (**) Dell WMI hotkeys: Applying InputClass "libinput"
 [     6.608] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
 [     6.608] (**) Dell WMI hotkeys: always reports core events
 [     6.608] (**) Option "Device" "/dev/input/event8"
 [     6.608] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
 [     6.608] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is a keyboard
 [     6.630] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
 [     6.630] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
 [     6.630] (**) Option "xkb_model" "pc105"
 [     6.630] (**) Option "xkb_layout" "us"
 [     6.630] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
 [     6.630] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is a keyboard
 [    12.426] (II) intel(0): EDID vendor "SDC", prod id 19528
 [    12.426] (II) intel(0): Printing DDC gathered Modelines:
 [    12.426] (II) intel(0): Modeline "1920x1080"x0.0  136.50  1920 1952 1984 2048  1080 1082 1085 1111 +hsync -vsync (66.7 kHz eP)
 [    12.427] (II) intel(0): Modeline "1920x1080"x0.0  109.20  1920 1952 1984 2048  1080 1082 1085 1111 +hsync -vsync (53.3 kHz e)
 [1m[7m%[27m[1m[0m                                                                                                                                                                                                                                                                                                                              
 

[0m[27m[24m[J
   16012 15-09-12 17:03:55 -0400 []
   sunstripe:~/[K[?2004heexit[?2004l
   17:03:59

 Script done on Sat 12 Sep 2015 05:03:59 PM EDT
diff --git a/displaylink-on-startup b/displaylink-on-startup
 Script started on Sat 12 Sep 2015 05:01:15 PM EDT
 /etc/zsh/zshenv:5: unknown file attribute: #
 /etc/zsh/zshrc:56: bad pattern: (~/.config|/etc/zsh/z.d)
 [1m[7m%[27m[1m[0m                                                                               
 

[0m[27m[24m[J
   16113 15-09-12 17:01:15 -0400 []
   sunstripe:~/[K[?2004hxxradr  ndr[?2004l
   17:01:26
 Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
 eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 239mm x 134mm
   1920x1080     59.99*+  59.93    47.99  
   1680x1050     59.95    59.88  
   1600x1024     60.17  
   1400x1050     59.98  
   1280x1024     60.02  
   1440x900      59.89  
   1280x960      60.00  
   1360x768      59.80    59.96  
   1152x864      60.00  
   1024x768      60.00  
   800x600       60.32    56.25  
   640x480       59.94  
 DP1 disconnected (normal left inverted right x axis y axis)
 HDMI1 disconnected (normal left inverted right x axis y axis)
 HDMI2 disconnected (normal left inverted right x axis y axis)
 VIRTUAL1 disconnected (normal left inverted right x axis y axis)
 [1m[7m%[27m[1m[0m                                                                               
 

[0m[27m[24m[J
   16114 15-09-12 17:01:26 -0400 []
   sunstripe:~/[K[?2004hccat /var/log/Xorg.0.log[?2004l
   17:01:37
 [     6.261] 
 X.Org X Server 1.17.2
 Release Date: 2015-06-16
 [     6.261] X Protocol Version 11, Revision 0
 [     6.261] Build Operating System: Linux 4.1.0 x86_64 Debian
 [     6.261] Current Operating System: Linux sunstripe 4.1.0-rc6 #3 SMP Fri Jun 12 19:26:46 EDT 2015 x86_64
 [     6.261] Kernel command line: root=PARTUUID=b7f1379f-4d49-4fee-aaf2-60306c5e045a 
 [     6.261] Build Date: 11 August 2015  10:51:15AM
 [     6.261] xorg-server 2:1.17.2-1.1 (http://www.debian.org/support) 
 [     6.261] Current version of pixman: 0.32.6
 [     6.261] 	Before reporting problems, check http://wiki.x.org
 	to make sure that you have the latest version.
 [     6.261] Markers: (--) probed, (**) from config file, (==) default setting,
 	(++) from command line, (!!) notice, (II) informational,
 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
 [     6.261] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 12 17:00:13 2015
 [     6.285] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
 [     6.317] (==) No Layout section.  Using the first Screen section.
 [     6.317] (==) No screen section available. Using defaults.
 [     6.317] (**) |-->Screen "Default Screen Section" (0)
 [     6.317] (**) |   |-->Monitor "<default monitor>"
 [     6.318] (==) No monitor specified for screen "Default Screen Section".
 	Using a default monitor configuration.
 [     6.318] (==) Automatically adding devices
 [     6.318] (==) Automatically enabling devices
 [     6.318] (==) Automatically adding GPU devices
 [     6.325] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
 [     6.325] 	Entry deleted from font path.
 [     6.330] (==) FontPath set to:
 	/usr/share/fonts/X11/misc,
 	/usr/share/fonts/X11/100dpi/:unscaled,
 	/usr/share/fonts/X11/75dpi/:unscaled,
 	/usr/share/fonts/X11/Type1,
 	/usr/share/fonts/X11/100dpi,
 	/usr/share/fonts/X11/75dpi,
 	built-ins
 [     6.330] (==) ModulePath set to "/usr/lib/xorg/modules"
 [     6.330] (II) The server relies on udev to provide the list of input devices.
 	If no devices become available, reconfigure udev or disable AutoAddDevices.
 [     6.330] (II) Loader magic: 0x564f0264fd40
 [     6.330] (II) Module ABI versions:
 [     6.330] 	X.Org ANSI C Emulation: 0.4
 [     6.330] 	X.Org Video Driver: 19.0
 [     6.330] 	X.Org XInput driver : 21.0
 [     6.330] 	X.Org Server Extension : 9.0
 [     6.331] (II) xfree86: Adding drm device (/dev/dri/card0)
 [     6.336] (--) PCI:*(0:0:2:0) 8086:0a1e:1028:0605 rev 11, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
 [     6.336] (II) LoadModule: "glx"
 [     6.336] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
 [     6.363] (II) Module glx: vendor="X.Org Foundation"
 [     6.363] 	compiled for 1.17.2, module version = 1.0.0
 [     6.363] 	ABI class: X.Org Server Extension, version 9.0
 [     6.363] (==) AIGLX enabled
 [     6.363] (==) Matched intel as autoconfigured driver 0
 [     6.363] (==) Matched intel as autoconfigured driver 1
 [     6.363] (==) Matched modesetting as autoconfigured driver 2
 [     6.363] (==) Matched fbdev as autoconfigured driver 3
 [     6.363] (==) Matched vesa as autoconfigured driver 4
 [     6.363] (==) Assigned the driver to the xf86ConfigLayout
 [     6.363] (II) LoadModule: "intel"
 [     6.366] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
 [     6.375] (II) Module intel: vendor="X.Org Foundation"
 [     6.375] 	compiled for 1.17.2, module version = 2.99.917
 [     6.375] 	Module class: X.Org Video Driver
 [     6.376] 	ABI class: X.Org Video Driver, version 19.0
 [     6.376] (II) LoadModule: "modesetting"
 [     6.376] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
 [     6.377] (II) Module modesetting: vendor="X.Org Foundation"
 [     6.377] 	compiled for 1.17.2, module version = 1.17.2
 [     6.377] 	Module class: X.Org Video Driver
 [     6.377] 	ABI class: X.Org Video Driver, version 19.0
 [     6.377] (II) LoadModule: "fbdev"
 [     6.377] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
 [     6.378] (II) Module fbdev: vendor="X.Org Foundation"
 [     6.378] 	compiled for 1.17.1, module version = 0.4.4
 [     6.378] 	Module class: X.Org Video Driver
 [     6.378] 	ABI class: X.Org Video Driver, version 19.0
 [     6.378] (II) LoadModule: "vesa"
 [     6.378] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
 [     6.379] (II) Module vesa: vendor="X.Org Foundation"
 [     6.379] 	compiled for 1.17.1, module version = 2.3.3
 [     6.379] 	Module class: X.Org Video Driver
 [     6.379] 	ABI class: X.Org Video Driver, version 19.0
 [     6.379] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
 	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
 	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
 	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
 	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
 [     6.380] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
 [     6.380] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
 [     6.380] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
 [     6.380] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
 [     6.380] (II) FBDEV: driver for framebuffer: fbdev
 [     6.380] (II) VESA: driver for VESA chipsets: vesa
 [     6.380] (--) using VT number 2

 [     6.389] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327
 [     6.389] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-2 (Vincent Cheng <[email protected]>)
 [     6.389] (II) intel(0): SNA compiled for use with valgrind
 [     6.389] (WW) Falling back to old probe method for modesetting
 [     6.389] (WW) Falling back to old probe method for fbdev
 [     6.389] (II) Loading sub module "fbdevhw"
 [     6.389] (II) LoadModule: "fbdevhw"
 [     6.390] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
 [     6.392] (II) Module fbdevhw: vendor="X.Org Foundation"
 [     6.392] 	compiled for 1.17.2, module version = 0.0.2
 [     6.392] 	ABI class: X.Org Video Driver, version 19.0
 [     6.392] (WW) Falling back to old probe method for vesa
 [     6.392] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4200
 [     6.392] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
 [     6.392] (II) intel(0): Creating default Display subsection in Screen section
 	"Default Screen Section" for depth/fbbpp 24/32
 [     6.392] (==) intel(0): Depth 24, (--) framebuffer bpp 32
 [     6.392] (==) intel(0): RGB weight 888
 [     6.392] (==) intel(0): Default visual is TrueColor
 [     6.393] (II) intel(0): Output eDP1 has no monitor section
 [     6.393] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
 [     6.393] (II) intel(0): Enabled output eDP1
 [     6.393] (II) intel(0): Output HDMI1 has no monitor section
 [     6.393] (II) intel(0): Enabled output HDMI1
 [     6.393] (II) intel(0): Output DP1 has no monitor section
 [     6.393] (II) intel(0): Enabled output DP1
 [     6.393] (II) intel(0): Output HDMI2 has no monitor section
 [     6.393] (II) intel(0): Enabled output HDMI2
 [     6.393] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
 [     6.393] (II) intel(0): Output VIRTUAL1 has no monitor section
 [     6.393] (II) intel(0): Enabled output VIRTUAL1
 [     6.393] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
 [     6.393] (==) intel(0): TearFree disabled
 [     6.393] (==) intel(0): DPI set to (96, 96)
 [     6.393] (II) Loading sub module "dri2"
 [     6.393] (II) LoadModule: "dri2"
 [     6.393] (II) Module "dri2" already built-in
 [     6.393] (II) Loading sub module "present"
 [     6.393] (II) LoadModule: "present"
 [     6.393] (II) Module "present" already built-in
 [     6.395] (II) UnloadModule: "modesetting"
 [     6.395] (II) Unloading modesetting
 [     6.395] (II) UnloadModule: "fbdev"
 [     6.395] (II) Unloading fbdev
 [     6.395] (II) UnloadSubModule: "fbdevhw"
 [     6.395] (II) Unloading fbdevhw
 [     6.395] (II) UnloadModule: "vesa"
 [     6.395] (II) Unloading vesa
 [     6.396] (==) Depth 24 pixmap format is 32 bpp
 [     6.396] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
 [     6.396] (==) intel(0): Backing store enabled
 [     6.396] (==) intel(0): Silken mouse enabled
 [     6.396] (II) intel(0): HW Cursor enabled
 [     6.396] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
 [     6.396] (==) intel(0): DPMS enabled
 [     6.396] (==) intel(0): display hotplug detection enabled
 [     6.396] (II) intel(0): [DRI2] Setup complete
 [     6.396] (II) intel(0): [DRI2]   DRI driver: i965
 [     6.396] (II) intel(0): [DRI2]   VDPAU driver: i965
 [     6.396] (II) intel(0): direct rendering: DRI2 enabled
 [     6.396] (II) intel(0): hardware support for Present enabled
 [     6.396] (--) RandR disabled
 [     6.409] (II) SELinux: Disabled on system
 [     6.531] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
 [     6.531] (II) AIGLX: enabled GLX_ARB_create_context
 [     6.531] (II) AIGLX: enabled GLX_ARB_create_context_profile
 [     6.531] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
 [     6.531] (II) AIGLX: enabled GLX_INTEL_swap_event
 [     6.531] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
 [     6.531] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
 [     6.531] (II) AIGLX: enabled GLX_ARB_fbconfig_float
 [     6.531] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
 [     6.531] (II) AIGLX: enabled GLX_ARB_create_context_robustness
 [     6.532] (II) AIGLX: Loaded and initialized i965
 [     6.532] (II) GLX: Initialized DRI2 GL provider for screen 0
 [     6.537] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
 [     6.554] (II) intel(0): Setting screen physical size to 508 x 285
 [     6.848] (II) config/udev: Adding input device Power Button (/dev/input/event3)
 [     6.848] (**) Power Button: Applying InputClass "evdev keyboard catchall"
 [     6.848] (**) Power Button: Applying InputClass "libinput"
 [     6.848] (II) LoadModule: "libinput"
 [     6.848] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
 [     6.869] (II) Module libinput: vendor="X.Org Foundation"
 [     6.869] 	compiled for 1.17.2, module version = 0.13.0
 [     6.869] 	Module class: X.Org XInput Driver
 [     6.869] 	ABI class: X.Org XInput driver, version 21.0
 [     6.869] (II) Using input driver 'libinput' for 'Power Button'
 [     6.869] (**) Power Button: always reports core events
 [     6.869] (**) Option "Device" "/dev/input/event3"
 [     6.870] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
 [     6.870] (II) input device 'Power Button', /dev/input/event3 is a keyboard
 [     6.899] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
 [     6.899] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
 [     6.899] (**) Option "xkb_model" "pc105"
 [     6.899] (**) Option "xkb_layout" "us"
 [     6.899] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
 [     6.899] (II) input device 'Power Button', /dev/input/event3 is a keyboard
 [     6.900] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
 [     6.900] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
 [     6.900] (**) Video Bus: Applying InputClass "libinput"
 [     6.900] (II) Using input driver 'libinput' for 'Video Bus'
 [     6.900] (**) Video Bus: always reports core events
 [     6.900] (**) Option "Device" "/dev/input/event5"
 [     6.900] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
 [     6.901] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
 [     6.910] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
 [     6.910] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
 [     6.910] (**) Option "xkb_model" "pc105"
 [     6.910] (**) Option "xkb_layout" "us"
 [     6.910] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
 [     6.910] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
 [     6.911] (II) config/udev: Adding input device Power Button (/dev/input/event2)
 [     6.911] (**) Power Button: Applying InputClass "evdev keyboard catchall"
 [     6.911] (**) Power Button: Applying InputClass "libinput"
 [     6.911] (II) Using input driver 'libinput' for 'Power Button'
 [     6.911] (**) Power Button: always reports core events
 [     6.911] (**) Option "Device" "/dev/input/event2"
 [     6.911] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
 [     6.911] (II) input device 'Power Button', /dev/input/event2 is a keyboard
 [     6.930] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
 [     6.930] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
 [     6.930] (**) Option "xkb_model" "pc105"
 [     6.930] (**) Option "xkb_layout" "us"
 [     6.930] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
 [     6.930] (II) input device 'Power Button', /dev/input/event2 is a keyboard
 [     6.931] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
 [     6.931] (**) Lid Switch: Applying InputClass "libinput"
 [     6.931] (II) Using input driver 'libinput' for 'Lid Switch'
 [     6.931] (**) Lid Switch: always reports core events
 [     6.931] (**) Option "Device" "/dev/input/event1"
 [     6.931] (II) input device 'Lid Switch', /dev/input/event1 not tagged as input device
 [     6.946] (II) failed to create input device '/dev/input/event1'.
 [     6.946] (EE) libinput: Lid Switch: Failed to create a device for /dev/input/event1
 [     6.946] (EE) PreInit returned 2 for "Lid Switch"
 [     6.946] (II) UnloadModule: "libinput"
 [     6.948] (II) config/udev: Adding input device Synaptics T Pad V 01.31 UNKNOWN (/dev/input/event11)
 [     6.948] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "evdev touchpad catchall"
 [     6.948] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "Multitouch Touchpad"
 [     6.948] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "touchpad catchall"
 [     6.948] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "Default clickpad buttons"
 [     6.948] (**) Synaptics T Pad V 01.31 UNKNOWN: Applying InputClass "libinput"
 [     6.948] (II) Using input driver 'libinput' for 'Synaptics T Pad V 01.31 UNKNOWN'
 [     6.948] (**) Synaptics T Pad V 01.31 UNKNOWN: always reports core events
 [     6.948] (**) Option "Device" "/dev/input/event11"
 [     7.000] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is tagged by udev as: Touchpad
 [     7.000] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is a touchpad
 [     7.040] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:06CB:2819.0002/input/input11/event11"
 [     7.040] (II) XINPUT: Adding extended input device "Synaptics T Pad V 01.31 UNKNOWN" (type: TOUCHPAD, id 9)
 [     7.040] (**) Option "AccelerationScheme" "none"
 [     7.040] (**) Synaptics T Pad V 01.31 UNKNOWN: (accel) selected scheme none/0
 [     7.040] (**) Synaptics T Pad V 01.31 UNKNOWN: (accel) acceleration factor: 2.000
 [     7.040] (**) Synaptics T Pad V 01.31 UNKNOWN: (accel) acceleration threshold: 4
 [     7.093] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is tagged by udev as: Touchpad
 [     7.093] (II) input device 'Synaptics T Pad V 01.31 UNKNOWN', /dev/input/event11 is a touchpad
 [     7.094] (II) config/udev: Adding input device Synaptics T Pad V 01.31 UNKNOWN (/dev/input/mouse0)
 [     7.094] (**) Synaptics T Pad V 01.31 UNKNOWN: Ignoring device from InputClass "touchpad ignore duplicates"
 [     7.095] (II) config/udev: Adding input device Synaptics T Pad V 01.31 (/dev/input/event10)
 [     7.095] (**) Synaptics T Pad V 01.31: Applying InputClass "evdev keyboard catchall"
 [     7.095] (**) Synaptics T Pad V 01.31: Applying InputClass "libinput"
 [     7.095] (II) Using input driver 'libinput' for 'Synaptics T Pad V 01.31'
 [     7.095] (**) Synaptics T Pad V 01.31: always reports core events
 [     7.095] (**) Option "Device" "/dev/input/event10"
 [     7.096] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is tagged by udev as: Keyboard
 [     7.096] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is a keyboard
 [     7.110] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:06CB:2819.0003/input/input10/event10"
 [     7.110] (II) XINPUT: Adding extended input device "Synaptics T Pad V 01.31" (type: KEYBOARD, id 10)
 [     7.110] (**) Option "xkb_model" "pc105"
 [     7.110] (**) Option "xkb_layout" "us"
 [     7.111] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is tagged by udev as: Keyboard
 [     7.111] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event10 is a keyboard
 [     7.112] (II) config/udev: Adding input device Synaptics T Pad V 01.31 (/dev/input/event12)
 [     7.112] (**) Synaptics T Pad V 01.31: Applying InputClass "evdev keyboard catchall"
 [     7.112] (**) Synaptics T Pad V 01.31: Applying InputClass "libinput"
 [     7.112] (II) Using input driver 'libinput' for 'Synaptics T Pad V 01.31'
 [     7.112] (**) Synaptics T Pad V 01.31: always reports core events
 [     7.112] (**) Option "Device" "/dev/input/event12"
 [     7.112] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is tagged by udev as: Keyboard
 [     7.112] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is a keyboard
 [     7.140] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:06CB:2819.0004/input/input13/event12"
 [     7.140] (II) XINPUT: Adding extended input device "Synaptics T Pad V 01.31" (type: KEYBOARD, id 11)
 [     7.140] (**) Option "xkb_model" "pc105"
 [     7.140] (**) Option "xkb_layout" "us"
 [     7.140] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is tagged by udev as: Keyboard
 [     7.140] (II) input device 'Synaptics T Pad V 01.31', /dev/input/event12 is a keyboard
 [     7.141] (II) config/udev: Adding input device UVC Camera (114d:1000) (/dev/input/event9)
 [     7.141] (**) UVC Camera (114d:1000): Applying InputClass "evdev keyboard catchall"
 [     7.141] (**) UVC Camera (114d:1000): Applying InputClass "libinput"
 [     7.141] (II) Using input driver 'libinput' for 'UVC Camera (114d:1000)'
 [     7.141] (**) UVC Camera (114d:1000): always reports core events
 [     7.141] (**) Option "Device" "/dev/input/event9"
 [     7.141] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is tagged by udev as: Keyboard
 [     7.141] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is a keyboard
 [     7.186] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9/event9"
 [     7.186] (II) XINPUT: Adding extended input device "UVC Camera (114d:1000)" (type: KEYBOARD, id 12)
 [     7.186] (**) Option "xkb_model" "pc105"
 [     7.186] (**) Option "xkb_layout" "us"
 [     7.187] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is tagged by udev as: Keyboard
 [     7.187] (II) input device 'UVC Camera (114d:1000)', /dev/input/event9 is a keyboard
 [     7.188] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event6)
 [     7.188] (**) HDA Intel PCH Dock Headphone: Applying InputClass "libinput"
 [     7.188] (II) Using input driver 'libinput' for 'HDA Intel PCH Dock Headphone'
 [     7.188] (**) HDA Intel PCH Dock Headphone: always reports core events
 [     7.188] (**) Option "Device" "/dev/input/event6"
 [     7.188] (II) input device 'HDA Intel PCH Dock Headphone', /dev/input/event6 not tagged as input device
 [     7.213] (II) failed to create input device '/dev/input/event6'.
 [     7.213] (EE) libinput: HDA Intel PCH Dock Headphone: Failed to create a device for /dev/input/event6
 [     7.213] (EE) PreInit returned 2 for "HDA Intel PCH Dock Headphone"
 [     7.213] (II) UnloadModule: "libinput"
 [     7.214] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
 [     7.214] (**) HDA Intel PCH Headphone: Applying InputClass "libinput"
 [     7.214] (II) Using input driver 'libinput' for 'HDA Intel PCH Headphone'
 [     7.214] (**) HDA Intel PCH Headphone: always reports core events
 [     7.214] (**) Option "Device" "/dev/input/event7"
 [     7.214] (II) input device 'HDA Intel PCH Headphone', /dev/input/event7 not tagged as input device
 [     7.240] (II) failed to create input device '/dev/input/event7'.
 [     7.240] (EE) libinput: HDA Intel PCH Headphone: Failed to create a device for /dev/input/event7
 [     7.240] (EE) PreInit returned 2 for "HDA Intel PCH Headphone"
 [     7.240] (II) UnloadModule: "libinput"
 [     7.241] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
 [     7.241] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
 [     7.241] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput"
 [     7.241] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
 [     7.241] (**) AT Translated Set 2 keyboard: always reports core events
 [     7.241] (**) Option "Device" "/dev/input/event0"
 [     7.241] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
 [     7.241] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
 [     7.253] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
 [     7.253] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
 [     7.253] (**) Option "xkb_model" "pc105"
 [     7.253] (**) Option "xkb_layout" "us"
 [     7.254] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
 [     7.254] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
 [     7.254] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
 [     7.254] (**) PC Speaker: Applying InputClass "libinput"
 [     7.254] (II) Using input driver 'libinput' for 'PC Speaker'
 [     7.254] (**) PC Speaker: always reports core events
 [     7.254] (**) Option "Device" "/dev/input/event4"
 [     7.255] (II) input device 'PC Speaker', /dev/input/event4 not tagged as input device
 [     7.310] (II) failed to create input device '/dev/input/event4'.
 [     7.310] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event4
 [     7.310] (EE) PreInit returned 2 for "PC Speaker"
 [     7.310] (II) UnloadModule: "libinput"
 [     7.310] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
 [     7.310] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
 [     7.310] (**) Dell WMI hotkeys: Applying InputClass "libinput"
 [     7.310] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
 [     7.310] (**) Dell WMI hotkeys: always reports core events
 [     7.310] (**) Option "Device" "/dev/input/event8"
 [     7.311] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
 [     7.311] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is a keyboard
 [     7.333] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
 [     7.333] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
 [     7.333] (**) Option "xkb_model" "pc105"
 [     7.333] (**) Option "xkb_layout" "us"
 [     7.334] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
 [     7.334] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is a keyboard
 [     7.410] (II) config/udev: removing GPU device /sys/devices/platform/evdi.0/drm/card1 /dev/dri/card1
 [     7.410] (II) config/udev: Adding drm device (/dev/dri/card1)
 [     7.411] (II) xfree86: Adding drm device (/dev/dri/card1)
 [     7.411] (II) LoadModule: "modesetting"
 [     7.411] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
 [     7.411] (II) Module modesetting: vendor="X.Org Foundation"
 [     7.411] 	compiled for 1.17.2, module version = 1.17.2
 [     7.411] 	Module class: X.Org Video Driver
 [     7.411] 	ABI class: X.Org Video Driver, version 19.0
 [     7.411] (II) modeset(G0): using drv /dev/dri/card1
 [     7.411] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
 [     7.411] (==) modeset(G0): RGB weight 888
 [     7.411] (==) modeset(G0): Default visual is TrueColor
 [     7.411] (II) Loading sub module "glamoregl"
 [     7.411] (II) LoadModule: "glamoregl"
 [     7.411] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
 [     7.428] (II) Module glamoregl: vendor="X.Org Foundation"
 [     7.428] 	compiled for 1.17.2, module version = 1.0.0
 [     7.428] 	ABI class: X.Org ANSI C Emulation, version 0.4
 [     7.428] (II) glamor: OpenGL accelerated X.org driver based.
 [     7.626] (II) glamor: EGL version 1.4 (DRI2):
 [     7.626] EGL_MESA_drm_image required.
 [     7.626] (EE) modeset(G0): glamor initialization failed
 [     7.626] (II) modeset(G0): ShadowFB: preferred NO, enabled NO
 [     7.627] (II) modeset(G0): Output DVI-1-0 has no monitor section
 [     7.627] (II) modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
 [     7.627] (==) modeset(G0): DPI set to (96, 96)
 [     7.627] (II) Loading sub module "fb"
 [     7.627] (II) LoadModule: "fb"
 [     7.627] (II) Loading /usr/lib/xorg/modules/libfb.so
 [     7.630] (II) Module fb: vendor="X.Org Foundation"
 [     7.630] 	compiled for 1.17.2, module version = 1.0.0
 [     7.630] 	ABI class: X.Org ANSI C Emulation, version 0.4
 [     7.630] (==) modeset(G0): Backing store enabled
 [     7.630] (==) modeset(G0): Silken mouse enabled
 [     7.630] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
 [     7.630] (==) modeset(G0): DPMS enabled
 [     7.632] (II) modeset(G0): Damage tracking initialized
 [     7.632] xf86: found device 2
 [     7.819] (II) modeset(G0): EDID vendor "HWP", prod id 9846
 [     7.819] (II) modeset(G0): Using EDID range info for horizontal sync
 [     7.819] (II) modeset(G0): Using EDID range info for vertical refresh
 [     7.819] (II) modeset(G0): Printing DDC gathered Modelines:
 [     7.819] (II) modeset(G0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
 [     7.819] (II) modeset(G0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
 [     7.819] (II) modeset(G0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
 [     7.819] (II) modeset(G0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
 [     7.819] (II) modeset(G0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
 [     7.819] (II) modeset(G0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
 [     7.819] (II) modeset(G0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
 [     7.819] (II) modeset(G0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
 [     7.819] (II) modeset(G0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
 [     7.819] (II) modeset(G0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
 [     7.819] (II) modeset(G0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
 [     7.819] (II) modeset(G0): Modeline "1280x1024"x0.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
 [     7.819] (II) modeset(G0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz e)
 [     7.819] (II) modeset(G0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
 [     7.819] (II) modeset(G0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
 [     7.819] (II) modeset(G0): Modeline "1920x1200"x0.0  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
 [    14.903] (II) intel(0): EDID vendor "SDC", prod id 19528
 [    14.903] (II) intel(0): Printing DDC gathered Modelines:
 [    14.903] (II) intel(0): Modeline "1920x1080"x0.0  136.50  1920 1952 1984 2048  1080 1082 1085 1111 +hsync -vsync (66.7 kHz eP)
 [    14.903] (II) intel(0): Modeline "1920x1080"x0.0  109.20  1920 1952 1984 2048  1080 1082 1085 1111 +hsync -vsync (53.3 kHz e)
 [1m[7m%[27m[1m[0m                                                                               
 

[0m[27m[24m[J
   16115 15-09-12 17:01:37 -0400 []
   sunstripe:~/[K[?2004heexit[?2004l
   17:01:38

 Script done on Sat 12 Sep 2015 05:01:38 PM EDT