set up linux containers with node.js

lxc.sh

# update the host
apt-get update && apt-get upgrade -y # && apt-get dist-upgrade -y && apt-get autoremove --purge -y && apt-get autoclean -y

# https://www.stgraber.org/
# install linux containers
sudo apt-get install lxc

# list all containers and view their current status
sudo lxc-ls -f

sudo lxc-create -t ubuntu -n work   # create an ubuntu container named "work"
sudo lxc-start -n work -d           # start it up


#####
# SET AUTOSTART WITH A STATIC NETWORK ADDRESS
#####

# autostart that container
sudo echo "lxc.start.auto = 1" >> /var/lib/lxc/work/config # replace "work" with container name
sudo lxc-ls -f # check autostart setting is YES

# keep it on the same IP address when it starts (autostart continued)

# optional: exit container, back on host machine check ifconfig for gateway
ifconfig # run ifconfig on the host to double-check gateway address

# login to new container and update /etc/network/interfaces (NOT host, only container's etc/network/interfaces)
# replace dhcp w/ static using host's gateway and usually netmask 255.255.255.0
# /etc/network/interfaces will look like:
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
 address 10.0.3.148
 netmask 255.255.255.0
 gateway 10.0.3.1

# note: i like to use a single space for lines under `iface eth0 inet static`: address, netmask, gateway
#       but you can probably do whatever spacing feels good to you, tabs, etc...
#       container will now autostart back at the ip address given to `address` line


#####
# START, STOP, and DESTROY (delete)
#####

sudo lxc-stop -n work               # stop container cleanly from outside (alternative to: $ sudo reboot)
sudo lxc-stop -n work -k            # kill
sudo lxc-destroy -n work            # destroy

#####
# setup user account
#####

# print list of containers again to find work's IP
sudo lxc-ls -f

# ssh into the container
ssh [email protected]

# become root user
sudo -s

#from root create sudo user w/ login/pass worker/working
useradd worker -g sudo -s /bin/bash -m && echo "worker:working" | chpasswd



#####
# PUBLIC ROUTING TO CONTAINER (STATIC NETWORK ADDRESS RECOMMENDED ^^ )
#####


# log out of the container to drop a public (open) port from host machine down into the container
sudo iptables -t nat -A PREROUTING -p tcp --dport 3000 -j DNAT --to-destination 10.0.3.148:3000

# view the chain list for active iptables rules
sudo iptables -t nat -n -L

# see everything
sudo iptables -vL --line-numbers

# delete a rule, now container's port 3000 will no longer be publicly addressable port from host's IP
sudo iptables -t nat -D PREROUTING -p tcp --dport 3000 -j DNAT --to-destination 10.0.3.148:3000

# proxy from a higher port to a lower port
sudo iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 443 -j REDIRECT --to-port 3000

# create an iptables LOG chain
sudo iptables -N LOG
# Route INPUT/OUTPUT/FORWARD to LOG chain (substitute CHAIN with the chain you want to monitor, such as "INPUT"):
sudo iptables -A INPUT -j LOG
# Now log the packets with this command:
sudo iptables -A LOG -m limit --limit 60/min -j LOG --log-prefix "IPTables DROP: " --log-level 7
# real time monitoring in ubuntu
sudo tail -f /var/log/syslog
# centOS
sudo tail -f /var/log/messages


# log back into container from new user and setup basic deps for node.js
sudo apt-get update && sudo apt-get upgrade -y
sudo apt-get install curl wget git-core

git clone https://github.com/creationix/nvm.git ~/.nvm
cd && echo -e "source .nvm/nvm.sh" >> ".bashrc"

# source profile or bashrc for the .nvm shell function added by the line above
source ~/.bashrc # or just logout/login, sometimes: $ source $HOME/.bashrc

# install some versions of node
nvm i 0.10 && nvm i 0.11 && nvm i 0.12 && nvm i iojs

# always set a default version
nvm alias default iojs

# to move into a different version
nvm use 0.12

# basic npm commands
npm install [package-name]

# use global to make the package a global executable (doesnt apply for every package)
npm i -g forever

# quick server scripting, setup your package.json

{
  "name":"whatever",
  "dependencies": {
    "ecstatic":"1.6.x"
  }
}

npm install # run this from the directory where your deps are listed in package.json

# start a server
var http = require('http');
var server = http.createServer( require('ecstatic')({

# handle static files in the script directory's subfolder: /public
  root: __dirname + '/public'

}));

server.listen(4000, function(){
  console.log('listening on 4000');
});