Reto Schneider rettichschnidi

OpenWrt

Open up the case gently on the bottom with the blue "triangle"
Take out the PCB so that you can access the pins on the upper side
Attach the UART pins on the USB-to-Serial-Dongle to the respective pins on the router PCBA (GDN to GND, RX to Tx, TX to RX).
Plug in the dongle to the USB on your computer. When executing dmesg (sudo dmesg), you should see something like this: pl2303 converter now attached to ttyUSB2
Install e.g. picocom (sudo apt install picocom) and connect it to the dongle using a baud of 115200 and the ttyUSB2 seen before:

I hereby claim:

I am rettichschnidi on github.
I am rettichschnidi (https://keybase.io/rettichschnidi) on keybase.
I have a public key whose fingerprint is AC8C D403 EBF8 78C7 19A0 4357 6B9A FAF3 CCCB 851A

To claim this, I am signing this object:

	#!/bin/bash

	set -e

	readonly filename="/tmp/$(whoami)-usb-sound"

	if [ -f ${filename} ]; then
	rm "${filename}"
	pacmd set-card-profile 0 output:analog-stereo+input:analog-stereo && pacmd set-card-profile 1 off
	else

	From a77aaf4c69149d08b5e42f8419a39a8bc63bcdd5 Mon Sep 17 00:00:00 2001
	From: Reto Schneider <[email protected]>
	Date: Mon, 20 Jun 2016 01:47:10 +0200
	Subject: [PATCH] - HACK: First attempt to mitigate the IAR killing formatting

	---
	lib/Format/FormatToken.h \| 14 ++++++++++++++
	lib/Format/TokenAnnotator.cpp \| 20 ++++++++++++++++++--
	2 files changed, 32 insertions(+), 2 deletions(-)

	#include <future>
	#include <thread>

	int main() {
	std::promise<void> promise;
	std::future<void> future = promise.get_future();
	std::thread work_thread([&promise] { promise.set_value(); });
	future.wait();
	work_thread.join();
	}

	// Source: http://en.cppreference.com/w/cpp/thread/promise
	#include <future>
	#include <iostream>
	#include <numeric>
	#include <thread>
	#include <vector>

	void accumulate(std::vector<int>::iterator first,
	std::vector<int>::iterator last,
	std::promise<int> accumulate_promise) {

	set PATH=C:\Qt\Tools\mingw492_32\bin;%PATH%
	bootstrap.bat gcc
	b2 toolset=gcc cxxflags="--std=c++11" --build-dir=build-i386-windows-mingw492 --build-type=complete link=shared threading=multi runtime-link=shared variant=debug,release --without-python --without-mpi -q -prefix=../i386-windows-mingw492 install