OpenBSD running in Amazon EC2 t2.micro (no networking yet)

openbsd-amd64-20151210-aws

\|/booting hd0a:/bsd: -\|/-6867204\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+2173200\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+267272\|/-\|/-\|/-\|/-\+0+647168 [72+574968|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+382718\|/-\|/-\|/-\|/-\|/-\|/]=0xa69fc0
entry point at 0x1001000 [7205c766, 34000004, 24448b12, c060a304]
[ using 958400 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.8-current (GENERIC.MP-xen) #0: Thu Dec 10 17:52:04 CET 2015
    [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP-xen
real mem = 1056964608 (1008MB)
avail mem = 1020809216 (973MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xeb01f (11 entries)
bios0: vendor Xen version "4.2.amazon" date 10/16/2015
bios0: Xen HVM domU
acpi0 at bios0: rev 2
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP APIC HPET WAET SSDT SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 48 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-2676 v3 @ 2.40GHz, 2400.35 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,LONG,LAHF,ABM,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 100MHz
acpihpet0 at acpi0: 62500000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
pvbus0 at mainbus0: Xen 4.2
xen0 at pvbus0
xen0: hypercall page at va 0xffffffff81002000 pa 0x1002000
xen0: version 4.2.amazon
xen0: features 705<PIRQ,PVCLOCK,CBVEC,AUTOPMAP,WPT>
xen0: shared info page at va 0xffff8000000ef000 pa 0x3f703000
xen0: registered callback IDT vector 112
xen0: xenstore event channel 3
xen0: xenstore ring at va 0xffff800014ab8000 pa 0xfeffc000
xen0: port 3 bound to vcpu0: domain 0 port 570
xen0: xenstore interrupt established for port 3
"vfb" at xen0: device/vfb/0 not configured
"vbd" at xen0: device/vbd/768 not configured
"vif" at xen0: device/vif/0 not configured
"console" at xen0: device/console/0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 1024MB, 2097152 sectors
wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
pciide0: channel 1 disabled (no drives)
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x01: SMBus disabled
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xspd0 at pci0 dev 3 function 0 "XenSource Platform Device" rev 0x01
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm at mainbus0 not configured
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (c7c1783ccd71e0b5.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
Automatic boot in progress: starting file system checks.
/dev/wd0a (c7c1783ccd71e0b5.a): file system is clean; not checking
setting tty flags
pf enabled
starting network
openssl: generating isakmpd/iked RSA keys... done.
ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519 
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
Path to firmware: http://firmware.openbsd.org/firmware/snapshots/
No devices found which need firmware files to be downloaded.
starting local daemons: cron.
Thu Dec 10 19:20:26 CET 2015

OpenBSD/amd64 (openbsd-20151210.my.domain) (tty00)

login: 

how ?? what are the steps please mention... ?
I have a file OpenBSD.vmdk in my drive and i want to create its instance in aws ? How can i do that?...