Skip to content

Instantly share code, notes, and snippets.

View rgee0's full-sized avatar

Richard Gee rgee0

44 followers · 3 following
View GitHub Profile
@rgee0
rgee0 / steps.md
Created October 13, 2024 06:50 — forked from lordneon/steps.md
UK Light Wiring with Shelly 1

Intro

This is a simple guide on how to automate UK lights with a Shelly 1 by installing the shelly 1 relay into the ceiling pendant which has both permanent live, neutral and a switched live back from the wall switch.

These steps are from my own experience making my lighting "smart" but also user friendly (it works via a wall switch!). This simple guide will go through replacing an a normal ceiling pendant with one with room for a Shelly 1. If you have a ceiling light with a bigger base it's even easier.

Warning Electrical regulations must be followed by law. If you are not a competent person under the regulations do not attempt electrical work. https://www.diydoctor.org.uk/projects/electrical_safety.htm

Wiring Diagram

This diagram has been taken from here and modified to include the Shelly 1. Wiring Diagram

@rgee0
rgee0 / dash-listen-2.py
Created June 12, 2017 20:22 — forked from eob/dash-listen-2.py
from scapy.all import *
def arp_display(pkt):
if pkt[ARP].op == 1: #who-has (request)
if pkt[ARP].psrc == '0.0.0.0': # ARP Probe
if pkt[ARP].hwsrc == '74:75:48:5f:99:30': # Huggies
print "Pushed Huggies"
elif pkt[ARP].hwsrc == '10:ae:60:00:4d:f3': # Elements
print "Pushed Elements"
else:
print "ARP Probe from unknown device: " + pkt[ARP].hwsrc