Skip to content

Instantly share code, notes, and snippets.

@ricardozv

ricardozv/centos7_ambiente_desenvolvimento.md

Forked from marciopaiva/centos7_ambiente_desenvolvimento.md
Created October 19, 2020 14:00
Show Gist options
  • Save ricardozv/c3a832373e765e410c0026a81da123d0 to your computer and use it in GitHub Desktop.
Save ricardozv/c3a832373e765e410c0026a81da123d0 to your computer and use it in GitHub Desktop.
Download ZIP
CentOS 7 - Apache 2.4 + MOD_PROXY_FCGI + PHP-FPM 5.5 + InstantClient Oracle.
Raw
centos7_ambiente_desenvolvimento.md

CentOS 7 - Apache 2.4 + PHP-FPM 5.5 + InstantClient Oracle.

Montando uma VM para o desenvolvimento de aplicações em PHP, utilizado o CentOS 7

Raw
centos7_passo_01.md
Downloads

Downloads de ferramentas e bibliotecas necessárias para a instalação da VM

Realize o download do arquivo oracle-instantclient12.1-basic-12.1.0.2.0-1.x86_64.rpm.

Realize a instalação do WinSCP, VMware Player e crie uma VM com a ISO do CentOS 7.

Como pretendo simular um ambiente de produção. Minha VM foi criada com as seguintes configurações:

  • Memory 2 GB
  • Processors 4
  • HD 20GB
  • Network NAT

Durante o processo de instalação a VM pegou o IP (192.168.183.134), guarde o seu IP gerado para acesso via WinSCP/SSH.

Raw
centos7_passo_02.md
Instalação

Utilizando a ferramenta WinSCP, realize a cópia do arquivo oracle-instantclient12.1-basic-12.1.0.2.0-1.x86_64.rpm, para a sua VM e jogue na pasta "/tmp".

Acesse o terminal da VM, pelo WinSCP use "Ctrl+P" que será aberto o terminal. Vamos começar a brincadeira.

Por se tratar de uma VM de desenvolvimento local, vou desabilitar o Firewall e Selinux, que vem instalado e configurado por default. Caso for utilizar esse exemplo para outros ambientes recomendo que deixe os 2(dois) em funcionamento.

systemctl stop firewalld
systemctl disable firewalld
sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
reboot

Instalação dos RPMs e Repositórios necessários

yum install net-tools nano wget libaio perl
rpm -Uvh http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-1.noarch.rpm
rpm -Uvh http://rpms.famillecollet.com/enterprise/remi-release-7.rpm
rpm -ivh /tmp/oracle-instantclient12.1-basic-12.1.0.2.0-1.x86_64.rpm
echo '/usr/lib/oracle/12.1/client64/lib/' > /etc/ld.so.conf.d/Oracle-InstantClient-12.1.conf
ldconfig
yum update
reboot

Para evitar surpresas, realizei mais um reboot para validar a atualização de kernel.

Instalação do Apache, PHP e libs.

yum --enablerepo=remi,remi-php55 install httpd php-fpm php-common php-pecl-apcu php-gd php-intl php-mbstring php-mssql php-mysql php-mysqlnd php-oci8 php-xmlrpc php-openssl php-pgsql php-soap php-opcache php-mcrypt php-pecl-pthreads

Iniciando o serviço do Apache, setando para que seja iniciado ao boot e verificando o status.

systemctl start httpd.service
systemctl enable httpd.service
systemctl status httpd.service -l

Removendo o Warning da falta de ServerName do Apache.

echo "ServerName localhost" >> /etc/httpd/conf.d/servername.conf

Iniciando o serviço do PHP-FPM, setando para que seja iniciado ao boot e verificando o status.

systemctl start php-fpm.service
systemctl enable php-fpm.service
systemctl status php-fpm.service -l

Criando o arquivo info.php para validar as configurações do PHP.

printf '<?php\n   phpinfo();' > /var/www/html/info.php

Criando um VirtualHost utilizando o mod_proxy_fcgi

nano /etc/httpd/conf.d/localhost.conf
<VirtualHost *:80>
    
    ServerName localhost
    
    ProxyPassMatch ^/(.*\.php(/.*)?)$ fcgi://127.0.0.1:9000/var/www/html/$1

    DocumentRoot /var/www/html
    <Directory /var/www/html>
        AllowOverride All
        Require all granted
    </Directory>

    ErrorLog /var/log/httpd/localhost_error.log
    CustomLog /var/log/httpd/localhost_access.log combined
</VirtualHost>

systemctl restart httpd.service
systemctl status httpd.service -l

Para validar as configurações acesse via navegador os endereços:

Raw
centos7_passo_03.md
Configuração Apache

O Apache 2.4 no CentOS, praticamente carrega todos os módulos na sua instalação. Como não vou utilizar todos os módulos vou desabilitar e deixar apenas o que preciso.

Todas as configurações foram baseadas no [CIS Apache HTTP Server 2.4 Benchmark] (http://und.edu/cio/it-security/policy/_files/docs/cis-apache-http-server-2-4-benchmark-v1-1-0.pdf)

nano /etc/httpd/conf.modules.d/00-base.conf
#
# This file loads most of the modules included with the Apache HTTP
# Server itself.
#

#LoadModule access_compat_module modules/mod_access_compat.so
#LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_core_module modules/mod_authn_core.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule data_module modules/mod_data.so
#LoadModule dbd_module modules/mod_dbd.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
LoadModule env_module modules/mod_env.so
LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule mime_module modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so

#LoadModule buffer_module modules/mod_buffer.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule dialup_module modules/mod_dialup.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule request_module modules/mod_request.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule speling_module modules/mod_speling.so
nano /etc/httpd/conf.modules.d/00-dav.conf
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
nano /etc/httpd/conf.modules.d/00-lua.conf
#LoadModule lua_module modules/mod_lua.so
nano /etc/httpd/conf.modules.d/00-mpm.conf
# Select the MPM module which should be used by uncommenting exactly
# one of the following LoadModule lines:

# prefork MPM: Implements a non-threaded, pre-forking web server
# See: http://httpd.apache.org/docs/2.4/mod/prefork.html
#LoadModule mpm_prefork_module modules/mod_mpm_prefork.so

# worker MPM: Multi-Processing Module implementing a hybrid
# multi-threaded multi-process web server
# See: http://httpd.apache.org/docs/2.4/mod/worker.html
#
#LoadModule mpm_worker_module modules/mod_mpm_worker.so

# event MPM: A variant of the worker MPM with the goal of consuming
# threads only for connections with active processing
# See: http://httpd.apache.org/docs/2.4/mod/event.html
#
LoadModule mpm_event_module modules/mod_mpm_event.so
nano /etc/httpd/conf.modules.d/00-proxy.conf
# This file configures all the proxy modules:
LoadModule proxy_module modules/mod_proxy.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
nano /etc/httpd/conf.modules.d/00-systemd.conf
# This file configures systemd module:
LoadModule systemd_module modules/mod_systemd.so
nano /etc/httpd/conf.modules.d/01-cgi.conf
# This configuration file loads a CGI module appropriate to the MPM
# which has been configured in 00-mpm.conf.  mod_cgid should be used
# with a threaded MPM; mod_cgi with the prefork MPM.

<IfModule mpm_worker_module>
   LoadModule cgid_module modules/mod_cgid.so
   ThreadsPerChild           25
   StartServers               3
   ServerLimit              400
   MinSpareThreads           75
   MaxSpareThreads          250
   MaxRequestWorkers      10000
   MaxConnectionsPerChild     0   
</IfModule>

<IfModule mpm_event_module>
   LoadModule cgid_module modules/mod_cgid.so
   ThreadsPerChild           25
   StartServers               3
   ServerLimit              400
   MinSpareThreads           75
   MaxSpareThreads          250
   MaxRequestWorkers      10000
   MaxConnectionsPerChild     0
</IfModule>

<IfModule mpm_prefork_module>
   LoadModule cgi_module modules/mod_cgi.so
   StartServers               5
   ServerLimit             1000
   MinSpareServers            5
   MaxSpareServers           10
   MaxRequestWorkers       1000
   MaxConnectionsPerChild     0
</IfModule>

Ufa!!! deu trabalho testar todos os módulos para saber o que precisa para rodar.

Com base no documento, vou criar um arquivo de segurança para aplicar as regras que não estão sendo aplicadas.

nano /etc/httpd/conf.d/security.conf
#
# http://und.edu/cio/it-security/policy/_files/docs/cis-apache-http-server-2-4-benchmark-v1-1-0.pdf
#

Timeout 10
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 15
RequestReadTimeout header=20-40,MinRate=500 body=20,MinRate=500
LimitRequestline 512
LimitRequestFields 100
LimitRequestFieldsize 1024
LimitRequestBody 102400
systemctl restart httpd.service
Raw
centos7_passo_04.md
Configuração PHP
nano /etc/php.ini

Altere as seguintes linhas:

date.timezone = "America/Sao_Paulo"
default_charset = "UTF-8"
upload_max_filesize = 10M
post_max_size = 20M
realpath_cache_size = 64k
realpath_cache_ttl = 3600
max_execution_time = 120
systemctl restart php-fpm.service
Raw
centos7_passo_05.md
Configuração InstantClient Oracle

Configurações das Variáveis de Ambiente.

nano /etc/sysconfig/php-fpm

Incluir no arquivo o NLS_LANG, conforme arquivo abaixo:

# Additional environment file for php-fpm

# This file is deprecated when systemd is used and
# will be removed in the future

# To alter the FPM environment, copy the unit file
# from /usr/lib/systemd/system/php-fpm.service
# to   /etc/systemd/system/php-fpm.service
# and add an Environment line

# With systemd >= 204 you can simply drop a file with the
# suffix .conf in /etc/systemd/system/php-fpm.service.d, with
#     [Service]
#     Environment=FOO=bar

# See systemd documentation.
#    man systemd.unit
#    man systemd.exec

NLS_LANG = 'BRAZILIAN PORTUGUESE_BRAZIL.AL32UTF8'
NLS_TERRITORY		= 'BRAZIL'
NLS_DUAL_CURRENCY	= 'R$'
NLS_CURRENCY		= 'R$'
NLS_ISO_CURRENCY	= 'BRAZIL'
NLS_DATE_LANGUAGE	= 'BRAZILIAN PORTUGUESE'
NLS_DATE_FORMAT		= 'DD/MM/YYYY'
NLS_TIME_FORMAT		= 'HH24:MI:SS'
NLS_TIMESTAMP_FORMAT 	= 'DD/MM/YYYY HH24:MI:SS'

Próximo passo é incluir as variáveis no pool do php-fpm

nano /etc/php-fpm.d/www.conf

Segue conteúdo e local aonde deve ser incluido.

...

; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
env[HOSTNAME] = 'localhost'
env[NLS_LANG] = 'BRAZILIAN PORTUGUESE_BRAZIL.AL32UTF8'
env[NLS_TERRITORY] = 'BRAZIL'
env[NLS_DUAL_CURRENCY] = 'R$'
env[NLS_CURRENCY] = 'R$'
env[NLS_ISO_CURRENCY] = 'BRAZIL'
env[NLS_DATE_LANGUAGE] = 'BRAZILIAN PORTUGUESE'
env[NLS_DATE_FORMAT] = 'DD/MM/YYYY'
env[NLS_TIME_FORMAT] = 'HH24:MI:SS'
env[NLS_TIMESTAMP_FORMAT] = 'DD/MM/YYYY HH24:MI:SS'

...

As informações são redundantes, mas foi a unica forma que consegui para funcionar em ambientes (RHEL 7 e CentOS 7)

systemctl restart php-fpm.service
Raw
centos7_passo_06.md
Configuração Apc Cache
nano /etc/php.d/apcu.ini
; Enable APCu extension module
extension = apcu.so

apc.enabled=1
apc.shm_segments=1

;32M per WordPress install
apc.shm_size=128M

;Relative to the number of cached files (you may need to watch your stats for a day or two to find out a good number)
apc.num_files_hint=7000

;Relative to the size of WordPress
apc.user_entries_hint=4096

;The number of seconds a cache entry is allowed to idle in a slot before APC dumps the cache
apc.ttl=7200
apc.user_ttl=7200
apc.gc_ttl=3600

;Setting this to 0 will give you the best performance, as APC will
;not have to check the IO for changes. However, you must clear
;the APC cache to recompile already cached files. If you are still
;developing, updating your site daily in WP-ADMIN, and running W3TC
;set this to 1
apc.stat=1

;This MUST be 0, WP can have errors otherwise!
apc.include_once_override=0

;Only set to 1 while debugging
apc.enable_cli=0

;Allow 2 seconds after a file is created before it is cached to prevent users from seeing half-written/weird pages
apc.file_update_protection=2

;Leave at 2M or lower. WordPress does't have any file sizes close to 2M
apc.max_file_size=2M

apc.cache_by_default=1
apc.use_request_time=1
apc.slam_defense=0
apc.mmap_file_mask=/tmp/apc.XXXXXX
apc.stat_ctime=0
apc.canonicalize=1
apc.write_lock=1
apc.report_autofilter=0
apc.rfc1867=0
apc.rfc1867_prefix =upload_
apc.rfc1867_name=APC_UPLOAD_PROGRESS
apc.rfc1867_freq=0
apc.rfc1867_ttl=3600
apc.lazy_classes=0
apc.lazy_functions=0
Raw
centos7_passo_07.md
Configuração Zend OpCache
nano /etc/php.d/opcache.ini
; Enable Zend OPcache extension module
zend_extension=opcache.so

; Determines if Zend OPCache is enabled
opcache.enable=1

; Determines if Zend OPCache is enabled for the CLI version of PHP
opcache.enable_cli=1

; The OPcache shared memory storage size.
opcache.memory_consumption=128

; The amount of memory for interned strings in Mbytes.
opcache.interned_strings_buffer=8

; The maximum number of keys (scripts) in the OPcache hash table.
; Only numbers between 200 and 100000 are allowed.
opcache.max_accelerated_files=7000

; The maximum percentage of "wasted" memory until a restart is scheduled.
;opcache.max_wasted_percentage=5

; When this directive is enabled, the OPcache appends the current working
; directory to the script key, thus eliminating possible collisions between
; files with the same name (basename). Disabling the directive improves
; performance, but may break existing applications.
;opcache.use_cwd=1

; When disabled, you must reset the OPcache manually or restart the
; webserver for changes to the filesystem to take effect.
;opcache.validate_timestamps=1

; How often (in seconds) to check file timestamps for changes to the shared
; memory storage allocation. ("1" means validate once per second, but only
; once per request. "0" means always validate)
opcache.revalidate_freq=60

; Enables or disables file search in include_path optimization
;opcache.revalidate_path=0

; If disabled, all PHPDoc comments are dropped from the code to reduce the
 ;size of the optimized code.
;opcache.save_comments=1

; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments"
; may be always stored (save_comments=1), but not loaded by applications
; that don't need them anyway.
;opcache.load_comments=1

; If enabled, a fast shutdown sequence is used for the accelerated code
opcache.fast_shutdown=1

; Allow file existence override (file_exists, etc.) performance feature.
;opcache.enable_file_override=0

; A bitmask, where each bit enables or disables the appropriate OPcache
; passes
;opcache.optimization_level=0xffffffff

;opcache.inherited_hack=1
;opcache.dups_fix=0

; The location of the OPcache blacklist file (wildcards allowed).
; Each OPcache blacklist file is a text file that holds the names of files
; that should not be accelerated.
opcache.blacklist_filename=/etc/php.d/opcache*.blacklist

; Allows exclusion of large files from being cached. By default all files
; are cached.
;opcache.max_file_size=0

; Check the cache checksum each N requests.
; The default value of "0" means that the checks are disabled.
;opcache.consistency_checks=0

; How long to wait (in seconds) for a scheduled restart to begin if the cache
; is not being accessed.
;opcache.force_restart_timeout=180

; OPcache error_log file name. Empty string assumes "stderr".
;opcache.error_log=

; All OPcache errors go to the Web server log.
; By default, only fatal errors (level 0) or errors (level 1) are logged.
; You can also enable warnings (level 2), info messages (level 3) or
; debug messages (level 4).
;opcache.log_verbosity_level=1

; Preferred Shared Memory back-end. Leave empty and let the system decide.
;opcache.preferred_memory_model=

; Protect the shared memory from unexpected writing during script execution.
; Useful for internal debugging only.
;opcache.protect_memory=0
Raw
centos7_passo_08.md
Configuração PHP-PFM
nano /etc/php-fpm.conf
;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;

; All relative paths in this configuration file are relative to PHP's install
; prefix.

; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
include=/etc/php-fpm.d/*.conf

;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;

[global]
; Pid file
; Default Value: none
pid = /run/php-fpm/php-fpm.pid

; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; in a local file.
; Default Value: /var/log/php-fpm.log
error_log = /var/log/php-fpm/error.log

; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon

; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm
;syslog.ident = php-fpm

; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice

; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
emergency_restart_threshold = 10

; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated.  This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
emergency_restart_interval = 1m

; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
process_control_timeout = 10

; The maximum number of processes FPM will fork. This has been design to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
;process.max = 128

; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool process will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
;process.priority = -19

; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
daemonize = yes

; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
;rlimit_files = 1024

; Set max core size rlimit for the master process.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Specify the event mechanism FPM will use. The following is available:
; - select     (any POSIX os)
; - poll       (any POSIX os)
; - epoll      (linux >= 2.5.44)
; Default Value: not set (auto detection)
events.mechanism = epoll

; When FPM is build with systemd integration, specify the interval,
; in second, between health report notification to systemd.
; Set to 0 to disable.
; Available Units: s(econds), m(inutes), h(ours)
; Default Unit: seconds
; Default value: 10
;systemd_interval = 10

;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;

; See /etc/php-fpm.d/*.conf
nano /etc/php-fpm.d/www.conf
; Start a new pool named 'www'.
[www]

; The address on which to accept FastCGI requests.
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all addresses on a
;                            specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = 127.0.0.1:9000

; Set listen(2) backlog. A value of '-1' means unlimited.
; Default Value: -1
listen.backlog = -1
 
; List of ipv4 addresses of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
listen.allowed_clients = 127.0.0.1

; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions. 
; Default Values: user and group are set as the running user
;                 mode is set to 0660
;listen.owner = nobody
;listen.group = nobody
;listen.mode = 0660

; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
;       will be used.
; RPM: apache Choosed to be able to access some dir as httpd
user = apache
; RPM: Keep a group allowed to write in log dir.
group = apache

; Choose how the process manager will control the number of child processes.
; Possible Values:
;   static  - a fixed number (pm.max_children) of child processes;
;   dynamic - the number of child processes are set dynamically based on the
;             following directives:
;             pm.max_children      - the maximum number of children that can
;                                    be alive at the same time.
;             pm.start_servers     - the number of children created on startup.
;             pm.min_spare_servers - the minimum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is less than this
;                                    number then some children will be created.
;             pm.max_spare_servers - the maximum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is greater than this
;                                    number then some children will be killed.
; Note: This value is mandatory.
pm = dynamic

; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes to be created when pm is set to 'dynamic'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI.
; Note: Used when pm is set to either 'static' or 'dynamic'
; Note: This value is mandatory.
pm.max_children = 100

; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 50

; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 20

; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 50
 
; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
pm.max_requests = 5000

; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. By default, the status page shows the following
; information:
;   accepted conn    - the number of request accepted by the pool;
;   pool             - the name of the pool;
;   process manager  - static or dynamic;
;   idle processes   - the number of idle processes;
;   active processes - the number of active processes;
;   total processes  - the number of idle + active processes.
; The values of 'idle processes', 'active processes' and 'total processes' are
; updated each second. The value of 'accepted conn' is updated in real time.
; Example output:
;   accepted conn:   12073
;   pool:             www
;   process manager:  static
;   idle processes:   35
;   active processes: 65
;   total processes:  100
; By default the status page output is formatted as text/plain. Passing either
; 'html' or 'json' as a query string will return the corresponding output
; syntax. Example:
;   http://www.foo.bar/status
;   http://www.foo.bar/status?json
;   http://www.foo.bar/status?html
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set 
;pm.status_path = /status
 
; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping

; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong
 
; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_terminate_timeout = 0
 
; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
request_slowlog_timeout = 20s
 
; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
slowlog = /var/log/php-fpm/www-slow.log
 
; Set open file descriptor rlimit.
; Default Value: system defined value
rlimit_files = 50000
 
; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
rlimit_core = unlimited
 
; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: chrooting is a great security feature and should be used whenever 
;       possible. However, all PHP paths will be relative to the chroot
;       (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot = 
 
; Chdir to this directory at the start. This value must be an absolute path.
; Default Value: current directory or / when chroot
;chdir = /var/www
 
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Default Value: no
catch_workers_output = yes
 
; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; exectute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5

; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
env[HOSTNAME] = 'ms-devel'
env[NLS_LANG] = 'BRAZILIAN PORTUGUESE_BRAZIL.AL32UTF8'
env[NLS_TERRITORY] = 'BRAZIL'
env[NLS_DUAL_CURRENCY] = 'R$'
env[NLS_CURRENCY] = 'R$'
env[NLS_ISO_CURRENCY] = 'BRAZIL'
env[NLS_DATE_LANGUAGE] = 'BRAZILIAN PORTUGUESE'
env[NLS_DATE_FORMAT] = 'DD/MM/YYYY'
env[NLS_TIME_FORMAT] = 'HH24:MI:SS'
env[NLS_TIMESTAMP_FORMAT] = 'DD/MM/YYYY HH24:MI:SS'

; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
;   php_value/php_flag             - you can set classic ini defines which can
;                                    be overwritten from PHP call 'ini_set'. 
;   php_admin_value/php_admin_flag - these directives won't be overwritten by
;                                     PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.

; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.

; Default Value: nothing is defined by default except the values in php.ini and
;                specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
;php_flag[display_errors] = off
php_admin_value[error_log] = /var/log/php-fpm/www-error.log
php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 128M

; Set session path to a directory owned by process user
php_value[session.save_handler] = files
php_value[session.save_path]    = /var/lib/php/session
php_value[soap.wsdl_cache_dir]  = /var/lib/php/wsdlcache
Raw
centos7_passo_99.md
Ferramenta para tunning do apache
wget -O /sbin/check_httpd_limits https://check-httpd-limits.googlecode.com/svn/trunk/check_httpd_limits.pl
chmod +x /sbin/check_httpd_limits

Para checar as configurações do seu apache

check_httpd_limits --config=/etc/httpd/conf.modules.d/01-cgi.conf --verbose
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment