Setup Modem SMART ZTE

modem-smart-zte.sh

#!/bin/sh
# Written by Aris S Ripandi ([email protected]
# 2012/01/16
# http://www.hex-a.blogspot.com/2012/12/cara-setting-modem-smart-freen-ce682-di.html
# cek user dulu (harus root)
[[ $(id -u) -ne 0 ]] && { echo "$0: You must be root user to run this script. Run it as 'sudo $0'"; exit 1; }

function setup() {
    lsusb
    eject /dev/sr0
    rmmod usb_storage

    read -p "Pencet enter untuk lanjut atau CTRL+C untuk keluar.." continue
    lsusb

    read -p "Pencet enter untuk lanjut atau CTRL+C untuk keluar.." continue
    modprobe usbserial vendor=0x19d2 product=0xffdd

    mv /etc/wvdial.conf /etc/wvdial.conf.bak
    echo "[Dialer smart]" >> /etc/wvdial.conf
    echo "Init1 = ATZ" >> /etc/wvdial.conf
    echo "Init2 = ATQ0 V1 E1 S0=0 &C1 &D2" >> /etc/wvdial.conf
    echo "+FCLASS =0" >> /etc/wvdial.conf
    echo "Stupid Mode = 1" >> /etc/wvdial.conf
    echo "Modem Type = Analog Modem" >> /etc/wvdial.conf
    echo "Command Line = ATDT" >> /etc/wvdial.conf
    echo "ISDN = 0" >> /etc/wvdial.conf
    echo "New PPPD = yes" >> /etc/wvdial.conf
    echo "Phone = #777" >> /etc/wvdial.conf
    echo "Modem = /dev/ttyUSB0" >> /etc/wvdial.conf
    echo "Username = smart" >> /etc/wvdial.conf
    echo "Password = smart" >> /etc/wvdial.conf
    echo "Baud = 460800" >> /etc/wvdial.conf

    read -p "Alhamdulillah instalasi beres. Silahkan tulis perintah \"sudo wvdial smart\" untuk memulai koneksi" continue
}

function konek() {
    eject /dev/sr0
    sleep 2
    modprobe usbserial vendor=0x19d2 product=0xffdd
    sleep 2
    wvdial smart
}

read -p "Pilih mana [ instal | konek ] ? " tanya
shopt -s nocasematch
if [[ $tanya =~ instal  ]]; then
  setup;
else
  konek;
fi
shopt -u nocasematch