Skip to content

Instantly share code, notes, and snippets.

@rmoriz

rmoriz/cpuinfo

Created December 14, 2011 11:27
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save rmoriz/1476211 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save rmoriz/1476211 to your computer and use it in GitHub Desktop.
Download ZIP
BeagleBone
Raw
cpuinfo
root@beaglebone:~# cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 498.89
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : am335xevm
Revision : 0000
Serial : 0000000000000000
Raw
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0+ (koen@dominion) (gcc version 4.5.4 20110917 (prerelease) (GCC) ) #1 Tue Nov 15 15:51:15 CET 2011
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: am335xevm
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c047b7d0, node_mem_map c04c1000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyO0,115200n8 run_hardware_tests quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ip=none
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 253968k/253968k available, 8176k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffa00000 - 0xffe00000 ( 4 MB)
[ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf800000 - 0xc0000000 ( 8 MB)
[ 0.000000] .text : 0xc0008000 - 0xc03fc6a4 (4050 kB)
[ 0.000000] .init : 0xc03fd000 - 0xc0431000 ( 208 kB)
[ 0.000000] .data : 0xc0432000 - 0xc047c1e0 ( 297 kB)
[ 0.000000] .bss : 0xc047c204 - 0xc04c0ee0 ( 276 kB)
[ 0.000000] NR_IRQS:410 nr_irqs:410 410
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000220] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
[ 0.058645] pid_max: default: 32768 minimum: 301
[ 0.058801] Security Framework initialized
[ 0.058874] Mount-cache hash table entries: 512
[ 0.059295] Initializing cgroup subsys cpuacct
[ 0.059334] Initializing cgroup subsys memory
[ 0.059379] Initializing cgroup subsys devices
[ 0.059394] Initializing cgroup subsys freezer
[ 0.059407] Initializing cgroup subsys blkio
[ 0.059435] Initializing cgroup subsys perf_event
[ 0.059538] CPU: Testing write buffer coherency: ok
[ 0.060679] devtmpfs: initialized
[ 0.065035] print_constraints: dummy:
[ 0.065290] NET: Registered protocol family 16
[ 0.065477] GPMC revision 6.0
[ 0.066568] OMAP GPIO hardware version 0.1
[ 0.067523] omap_l3_smx omap_l3_smx.0: couldn't find resource
[ 0.067623] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.070153] omap_i2c.1: alias fck already exists
[ 0.070408] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.070891] omap2_mcspi.1: alias fck already exists
[ 0.071013] omap2_mcspi.2: alias fck already exists
[ 0.080133] bio: create slab <bio-0> at 0
[ 0.081386] SCSI subsystem initialized
[ 0.082279] usbcore: registered new interface driver usbfs
[ 0.082413] usbcore: registered new interface driver hub
[ 0.082587] usbcore: registered new device driver usb
[ 0.082948] registerd cppi-dma Intr @ IRQ 17
[ 0.082966] Cppi41 Init Done Qmgr-base(d083a000) dma-base(d0838000)
[ 0.082979] Cppi41 Init Done
[ 0.098701] omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz
[ 0.099685] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.100277] Switching to clocksource gp timer
[ 0.108714] Switched to NOHz mode on CPU #0
[ 0.112683] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.112862] musb-hdrc musb-hdrc.0: dma type: dma-cppi41
[ 0.113424] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.113452] musb-hdrc: MHDRC RTL version 2.0
[ 0.113466] musb-hdrc: setup fifo_mode 4
[ 0.113494] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.113848] musb-hdrc musb-hdrc.0: USB OTG mode controller at d080a000 using DMA, IRQ 18
[ 0.114142] musb-hdrc musb-hdrc.1: dma type: dma-cppi41
[ 0.114663] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.114690] musb-hdrc: MHDRC RTL version 2.0
[ 0.114702] musb-hdrc: setup fifo_mode 4
[ 0.114729] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.115058] musb-hdrc musb-hdrc.1: USB OTG mode controller at d080c800 using DMA, IRQ 19
[ 0.115439] NET: Registered protocol family 2
[ 0.115656] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.116109] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.116332] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.116465] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.116481] TCP reno registered
[ 0.116498] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.116532] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.116851] NET: Registered protocol family 1
[ 0.117242] RPC: Registered named UNIX socket transport module.
[ 0.117260] RPC: Registered udp transport module.
[ 0.117273] RPC: Registered tcp transport module.
[ 0.117286] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.117585] omap_init_opp_table: no hwmod or odev for iva, [8] cannot add OPPs.
[ 0.129584] VFS: Disk quotas dquot_6.5.2
[ 0.129660] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.131032] msgmni has been set to 496
[ 0.132145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.132254] io scheduler noop registered
[ 0.132269] io scheduler deadline registered
[ 0.132337] io scheduler cfq registered (default)
[ 0.133336] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.134694] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
[ 0.140951] console [ttyO0] enabled
[ 0.141352] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
[ 0.141676] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
[ 0.141976] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3
[ 0.142264] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4
[ 0.142561] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5
[ 0.144091] brd: module loaded
[ 0.148151] loop: module loaded
[ 0.148238] at24 1-0051: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
[ 0.200328] No daughter card found
[ 0.200393] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
[ 0.208362] Board name: A335BONE
[ 0.208377] Board version: 00A3
[ 0.208388] The board is a AM335x Beaglebone.
[ 0.209273] da8xx_lcdc da8xx_lcdc.0: GLCD: Found 1024x768@60 panel
[ 0.229781] Console: switching to colour frame buffer device 128x48
[ 0.243920] omap_hsmmc.0: alias fck already exists
[ 0.244343] _omap_mux_get_by_name: Could not find signal leds-gpio
[ 0.251774] SCSI Media Changer driver v0.25
[ 0.300356] davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
[ 0.300379] davinci_mdio davinci_mdio.0: detected phy mask fffffffe
[ 0.301393] davinci_mdio.0: probed
[ 0.301417] davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver SMSC LAN8710/LAN8720
[ 0.301905] usbcore: registered new interface driver catc
[ 0.301921] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[ 0.301992] usbcore: registered new interface driver kaweth
[ 0.302009] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 0.302081] usbcore: registered new interface driver pegasus
[ 0.302096] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[ 0.302176] usbcore: registered new interface driver rtl8150
[ 0.302245] usbcore: registered new interface driver asix
[ 0.302314] usbcore: registered new interface driver cdc_ether
[ 0.302383] usbcore: registered new interface driver dm9601
[ 0.302461] usbcore: registered new interface driver cdc_subset
[ 0.302530] usbcore: registered new interface driver zaurus
[ 0.302589] cdc_ncm: 04-Aug-2011
[ 0.302659] usbcore: registered new interface driver cdc_ncm
[ 0.302775] usbcore: registered new interface driver cdc_acm
[ 0.302791] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.302891] usbcore: registered new interface driver usblp
[ 0.302965] usbcore: registered new interface driver cdc_wdm
[ 0.303038] usbcore: registered new interface driver uas
[ 0.303052] Initializing USB Mass Storage driver...
[ 0.303146] usbcore: registered new interface driver usb-storage
[ 0.303160] USB Mass Storage support registered.
[ 0.303264] usbcore: registered new interface driver libusual
[ 0.303347] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 0.303470] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[ 0.303602] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.303624] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.303642] usb usb1: Product: MUSB HDRC host driver
[ 0.303657] usb usb1: Manufacturer: Linux 3.1.0+ musb-hcd
[ 0.303672] usb usb1: SerialNumber: musb-hdrc.1
[ 0.304481] hub 1-0:1.0: USB hub found
[ 0.304515] hub 1-0:1.0: 1 port detected
[ 0.305431] mousedev: PS/2 mouse device common for all mice
[ 0.306545] omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
[ 0.306732] i2c /dev entries driver
[ 0.307028] Linux media interface: v0.10
[ 0.307213] lirc_dev: IR Remote Control driver registered, major 249
[ 0.307231] IR NEC protocol handler initialized
[ 0.307244] IR RC5(x) protocol handler initialized
[ 0.307257] IR RC6 protocol handler initialized
[ 0.307269] IR JVC protocol handler initialized
[ 0.307281] IR Sony protocol handler initialized
[ 0.307294] IR RC5 (streamzap) protocol handler initialized
[ 0.307307] IR MCE Keyboard/mouse protocol handler initialized
[ 0.307321] IR LIRC bridge handler initialized
[ 0.307332] Linux video capture interface: v2.00
[ 0.307498] usbcore: registered new interface driver uvcvideo
[ 0.307512] USB Video Class driver (1.1.1)
[ 0.307605] Driver for 1-wire Dallas network protocol.
[ 0.308477] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 0.309600] Registered led device: beaglebone::usr0
[ 0.309730] Registered led device: beaglebone::usr1
[ 0.309862] Registered led device: beaglebone::usr2
[ 0.309991] Registered led device: beaglebone::usr3
[ 0.310115] Registered led device: dvi::usr0
[ 0.310236] Registered led device: dvi::usr1
[ 0.310798] usbcore: registered new interface driver usbhid
[ 0.310814] usbhid: USB HID core driver
[ 0.311502] usbcore: registered new interface driver snd-usb-audio
[ 0.312086] ALSA device list:
[ 0.312099] No soundcards found.
[ 0.312551] TCP cubic registered
[ 0.312564] Initializing XFRM netlink socket
[ 0.312592] NET: Registered protocol family 17
[ 0.312659] NET: Registered protocol family 15
[ 0.312724] Registering the dns_resolver key type
[ 0.312792] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.312821] ThumbEE CPU extension supported.
[ 0.313763] omap2_set_init_voltage: unable to get clk dpll1_ck
[ 0.319922] omap2_set_init_voltage: unable to set vdd_mpu_iva
[ 0.326074] omap2_set_init_voltage: unable to get clk l3_ick
[ 0.332073] omap2_set_init_voltage: unable to set vdd_core
[ 0.342797] registered taskstats version 1
[ 0.343138] Detected MACID=d4:94:a1:x
[ 0.344039] omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 0.344659] Waiting for root device /dev/mmcblk0p2...
[ 0.401416] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 0.403387] mmc0: new high speed SDHC card at address 1234
[ 0.403989] mmcblk0: mmc0:1234 SA04G 3.63 GiB
[ 0.405791] mmcblk0: p1 p2
[ 0.461703] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 0.461726] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 4.636944] EXT4-fs (mmcblk0p2): recovery complete
[ 4.644081] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.644163] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 4.647708] devtmpfs: mounted
[ 4.648145] Freeing init memory: 208K
[ 4.931523] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +SYSVINIT -LIBCRYPTSETUP; angstrom)
[ 5.037299] NET: Registered protocol family 10
[ 5.043605] systemd[1]: Set hostname to <beaglebone>.
[ 5.895032] udevd[56]: starting version 175
[ 6.215447] systemd-fsck[59]: Angstrom-Cloud9-: clean, 27397/874496 files, 773711/3494137 blocks
[ 6.259018] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 6.567338] /usr/sbin/crond[91]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
[ 6.964863] avahi-daemon[103]: Found user 'avahi' (UID 999) and group 'avahi' (GID 999).
[ 6.980080] led-config[93]: Configuring leds:
[ 6.989818] avahi-daemon[103]: Successfully dropped root privileges.
[ 7.002995] avahi-daemon[103]: avahi-daemon 0.6.30 starting up.
[ 7.206128] init.sh[102]: [bone-info] bone tester: GPIO 38 (pin 3 connector A) is not grounded, aborting tests
[ 7.383126] led-config[93]: beaglebone::usr0: heartbeat
[ 7.619881] load-timestamp.sh[92]: Update systemtime from /etc/timestamp
[ 8.368405]
[ 8.368414] CPSW phy found : id is : 0x7c0f1
[ 8.375361] PHY 0:01 not found
[ 8.380236] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.420496] gadget: Mass Storage Function, version: 2009/09/11
[ 10.420527] gadget: Number of LUNs=1
[ 10.420558] lun0: LUN: removable file: /dev/mmcblk0p1
[ 10.420615] gadget: Mass Storage Gadget, version: 2009/09/11
[ 10.420640] gadget: userspace failed to provide iSerialNumber
[ 10.420675] gadget: g_mass_storage ready
[ 10.420721] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
[ 10.420827] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
[ 10.420968] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.420990] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.421010] usb usb2: Product: MUSB HDRC host driver
[ 10.421025] usb usb2: Manufacturer: Linux 3.1.0+ musb-hcd
[ 10.421040] usb usb2: SerialNumber: musb-hdrc.0
[ 10.421947] hub 2-0:1.0: USB hub found
[ 10.421992] hub 2-0:1.0: 1 port detected
[ 10.757137] gadget: high speed config #1: Linux File-Backed Storage
[ 1187.360928] PHY: 0:00 - Link is Up - 100/Full
[ 1187.361186] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1198.350332] eth0: no IPv6 routers present
[ 1522.563815] musb-hdrc musb-hdrc.0: remove, state 1
[ 1522.563867] usb usb2: USB disconnect, device number 1
[ 1522.565785] musb-hdrc musb-hdrc.0: USB bus 2 deregistered
[ 1524.098365] gadget: using random self ethernet address
[ 1524.099218] usb0: MAC 86:89:28:c7:xxxx
[ 1524.099237] usb0: HOST MAC d4:94:a1:xxxxxx
[ 1524.099311] gadget: Ethernet Gadget, version: Memorial Day 2008
[ 1524.099342] gadget: g_ether ready
[ 1524.099398] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
[ 1524.099492] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
[ 1524.099641] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1524.099663] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1524.099681] usb usb2: Product: MUSB HDRC host driver
[ 1524.099696] usb usb2: Manufacturer: Linux 3.1.0+ musb-hcd
[ 1524.099711] usb usb2: SerialNumber: musb-hdrc.0
[ 1524.114196] hub 2-0:1.0: USB hub found
[ 1524.114236] hub 2-0:1.0: 1 port detected
[ 1524.170144] ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 1524.530575] gadget: high speed config #1: CDC Ethernet (ECM)
[ 1525.708865] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[ 1536.320336] usb0: no IPv6 routers present
Raw
misc
root@beaglebone:~# uname -ar
Linux beaglebone 3.1.0+ #1 Tue Nov 15 15:51:15 CET 2011 armv7l GNU/Linux
root@beaglebone:~# lsb_release -a
Distributor ID: Angstrom
Description: Angstrom GNU/Linux v2011.11-core (Core edition)
Release: v2011.11-core
Codename: Core edition
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment