-
-
Save robinnorth/1460fc1d8555679c9e6d8339c6d26193 to your computer and use it in GitHub Desktop.
PPP VPN split-network/split-DNS script for OSX
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/bin/sh | |
#################################################### | |
## ## | |
## PPP VPN split-network/split-DNS script for OSX ## | |
## by Aaron Meriwether ## | |
## ## | |
## installation: ## | |
## sudo cp thisfile /etc/ppp/ip-up ## | |
## sudo chmod 755 /etc/ppp/ip-up ## | |
## ## | |
#################################################### | |
################## | |
## begin config... | |
# Define per-VPN-server settings here... | |
SERVERS[0]="vpn.example.org" # must match the server name set in Network Preferences. | |
NETWORKS[0]="192.168.2.0/24 192.168.3.0/24" # only networks besides the VPN LAN itself! | |
DOMAINS[0]="example.org" # domains which should use the VPN's DNS resolver when connected. | |
SERVERS[1]="vpn.mit.edu" | |
NETWORKS[1]="" # an empty network list is acceptable if you are only interested in the DNS aspects | |
DOMAINS[1]="staff.mit.edu athena.mit.edu" | |
SERVERS[2]="vpn.rogers.com" | |
NETWORKS[2]="172.16.7.128/25 205.150.67.0/24" | |
DOMAINS[2]="" # likewise, an empty DNS list is acceptable if you are only interested in the network aspects | |
# set to /dev/null if you object to debugging output. | |
DEBUGFILE=/tmp/ip-up-debug.txt | |
## end config... | |
################# | |
# When the ppp link comes up, this script is called with the following | |
# parameters | |
# $1 the interface name used by pppd (e.g. ppp3) | |
# $2 the tty device name | |
# $3 the tty device speed | |
# $4 the local IP address for the interface | |
# $5 the remote IP address | |
# $6 the parameter specified by the 'ipparam' option to pppd | |
# (when used with a VPN configured via Network Preferences, | |
# $6 seems to contain the IP address of the gateway over | |
# which the VPN traffic passes. This might be useful in | |
# ip-up scripts which need to avoid breaking the route | |
# used by pppd itself.) | |
PATH=/usr/bin:/bin:/usr/sbin:/sbin | |
# Generic array operation. | |
# e.g.: indexOf "something" "${myArray[@]}" | |
# note the double quotes around the array and the use of [@] not [*] | |
indexOf() { | |
local s="$1"; shift; local a=( "$@" ) i | |
for (( i = 0; i < ${#@}; i++ )); do | |
if [ "${a[$i]}" == "$s" ]; then echo $i; return; fi | |
done | |
} | |
# Given an interface name, find the corresponding scutil service key. | |
if2service() { | |
local i | |
for i in $(echo "list State:/Network/Service/[^/]+/PPP" | scutil | cut -d/ -f4); do | |
if [ "$(echo show State:/Network/Service/$i/PPP | scutil | grep InterfaceName | cut -d' ' -f5)" == "$1" ]; then echo $i; return; fi | |
done | |
} | |
# Given a network service key (specifically a PPP service), get the server name (as set in Network Preferences). | |
getPppServerName() { | |
echo show Setup:/Network/Service/$1/PPP | scutil | grep CommRemoteAddress | cut -d' ' -f5 | |
} | |
echo "$(date +'%Y-%m-%d %T %Z') $0 1=$1 2=$2 3=$3 4=$4 5=$5 6=$6" >> $DEBUGFILE | |
SERVICE="$(if2service $1)" | |
echo "Service: $SERVICE" >> $DEBUGFILE | |
SERVER="$(getPppServerName $SERVICE)" | |
echo "Server Name: $SERVER" >> $DEBUGFILE | |
i=$(indexOf "$SERVER" "${SERVERS[@]}") | |
if [ -z "$i" ]; then | |
echo "No special configuration found for this VPN server." >> $DEBUGFILE | |
exit | |
fi | |
if [ -n "$(echo show State:/Network/Service/$SERVICE/IPv4 | scutil | grep OverridePrimary)" ]; then | |
echo "Clearing the 'Send all traffic over VPN connection' flag" >> $DEBUGFILE | |
scutil <<-END | |
get State:/Network/Service/$SERVICE/IPv4 | |
d.remove OverridePrimary | |
set State:/Network/Service/$SERVICE/IPv4 | |
END | |
fi | |
if [ -n "${NETWORKS[$i]}" ]; then | |
for n in ${NETWORKS[$i]}; do | |
echo "Adding route for network $n" >> $DEBUGFILE | |
route -n add -net $n $5 | |
done | |
fi | |
if [ -n "${DOMAINS[$i]}" ]; then | |
echo "Limiting DNS over the VPN to these domains: ${DOMAINS[$i]}" | |
scutil <<-END | |
get State:/Network/Service/$SERVICE/DNS | |
d.add SupplementalMatchDomains * ${DOMAINS[$i]} | |
set State:/Network/Service/$SERVICE/DNS | |
END | |
fi |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment