Skip to content

Instantly share code, notes, and snippets.

@rootiest

rootiest/BEGIN_LAYER.cfg

Last active May 13, 2022 09:12
Show Gist options
  • Save rootiest/5cf936f31b57c4ae3970a50fbc476823 to your computer and use it in GitHub Desktop.
Save rootiest/5cf936f31b57c4ae3970a50fbc476823 to your computer and use it in GitHub Desktop.
Download ZIP
M73 with layer progress
Raw
BEGIN_LAYER.cfg
[gcode_macro BEGIN_LAYER]
description: Start a new layer and notify system
gcode:
#Get layer details from Slicer GCode
{% set CUR_LAYER = params.NUM|default(0)|float + 1 %}
{% set NUM_LAYERS = params.COUNT|default(0)|float %}
{% set LAYER_Z = params.ZLAY|default(0)|float %}
SET_GCODE_VARIABLE MACRO=PREP_PRINT VARIABLE=cur_layer VALUE={CUR_LAYER}
SET_GCODE_VARIABLE MACRO=PREP_PRINT VARIABLE=num_layers VALUE={NUM_LAYERS}
SET_GCODE_VARIABLE MACRO=PREP_PRINT VARIABLE=layer_z VALUE={LAYER_Z}
Raw
M73.cfg
[gcode_macro M73]
rename_existing: M73.1
gcode:
{% set NUM_LAYERS = printer["gcode_macro PREP_PRINT"].num_layers %}
{% set CUR_LAYER = printer["gcode_macro PREP_PRINT"].cur_layer %}
M117 { "%02d:%02d" % (params.R|int // 60, (params.R|int) % 60) } remaining Layer {CUR_LAYER|int} of {NUM_LAYERS|int}
Raw
SuperSlicer After_Layer_Change
BEGIN_LAYER NUM={layer_num} COUNT={total_layer_count} ZLAY={layer_z}; Increment layer in Klipper
@rootiest
Copy link
Author

Prints with manual filament swaps will cause this macro to output blank M117 commands due to them changing the M73 parameters.

I am working on a solution to include "Remaining Time to Filament Swap" in the status messages in those cases.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment