Skip to content

Instantly share code, notes, and snippets.

@rooty
Created January 18, 2018 22:20
Show Gist options
  • Save rooty/62a2d7db65faa6e67672639815511350 to your computer and use it in GitHub Desktop.
Save rooty/62a2d7db65faa6e67672639815511350 to your computer and use it in GitHub Desktop.
sysctl-db
#
# /etc/sysctl.conf - Configuration file for setting system variables
# See /etc/sysctl.d/ for additional system variables.
# See sysctl.conf (5) for information.
#
#kernel.domainname = example.com
# Uncomment the following to stop low-level messages on console
#kernel.printk = 3 4 1 3
##############################################################3
# Functions previously found in netbase
#
# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
# Turn on Source Address Verification in all interfaces to
# prevent some spoofing attacks
#net.ipv4.conf.default.rp_filter=1
#net.ipv4.conf.all.rp_filter=1
# Uncomment the next line to enable TCP/IP SYN cookies
# See http://lwn.net/Articles/277146/
# Note: This may impact IPv6 TCP sessions too
#net.ipv4.tcp_syncookies=1
# Uncomment the next line to enable packet forwarding for IPv4
#net.ipv4.ip_forward=1
# Uncomment the next line to enable packet forwarding for IPv6
# Enabling this option disables Stateless Address Autoconfiguration
# based on Router Advertisements for this host
#net.ipv6.conf.all.forwarding=1
###################################################################
# Additional settings - these settings can improve the network
# security of the host and prevent against some network attacks
# including spoofing attacks and man in the middle attacks through
# redirection. Some network environments, however, require that these
# settings are disabled so review and enable them as needed.
#
# Do not accept ICMP redirects (prevent MITM attacks)
#net.ipv4.conf.all.accept_redirects = 0
#net.ipv6.conf.all.accept_redirects = 0
# or
# Accept ICMP redirects only for gateways listed in our default
# gateway list (enabled by default)
# net.ipv4.conf.all.secure_redirects = 1
#
# Do not send ICMP redirects (we are not a router)
#net.ipv4.conf.all.send_redirects = 0
#
# Do not accept IP source route packets (we are not a router)
#net.ipv4.conf.all.accept_source_route = 0
#net.ipv6.conf.all.accept_source_route = 0
#
# Log Martian Packets
#net.ipv4.conf.all.log_martians = 1
#
# Disable IPv6 autoconf
net.ipv6.conf.all.autoconf = 0
net.ipv6.conf.default.autoconf = 0
net.ipv6.conf.eth0.autoconf = 0
net.ipv6.conf.all.accept_ra = 0
net.ipv6.conf.default.accept_ra = 0
net.ipv6.conf.eth0.accept_ra = 0
vm.overcommit_memory = 1
vm.overcommit_ratio = 80
vm.min_free_kbytes = 1048576
fs.file-max = 13160869
kernel.shm_rmid_forced = 0
#kernel.shmall=4194304
#kernel.shmmax=17179869184
#kernel.shmmni=4096
kernel.shmmax=68719476736
kernel.shmall=16777216
net.ipv4.netfilter.ip_conntrack_max=1548576
vm.swappiness=20
net.ipv4.tcp_fin_timeout=60
net.ipv4.tcp_max_tw_buckets=524288
net.ipv4.tcp_rfc1337=1
net.core.somaxconn=1024
vm.vfs_cache_pressure=1000
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment