NanoPC T6 LTS - Kwiboo 24.04 on eMMC

gistfile1.txt

DDR Version V1.08 20220617
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
Manufacturer ID:0x1 Samsung
CH0 RX Vref:31.7%, TX Vref:23.8%,21.8%
CH1 RX Vref:30.7%, TX Vref:24.8%,21.8%
CH2 RX Vref:32.7%, TX Vref:22.8%,22.8%
CH3 RX Vref:31.7%, TX Vref:20.8%,18.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out

U-Boot SPL 2024.04-armbian (Jun 05 2024 - 18:19:27 +0000)
Trying to boot from MMC1
## Checking hash(es) for config config-1 ... OK
## Checking hash(es) for Image atf-1 ... sha256+ OK
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-1 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
## Checking hash(es) for Image atf-3 ... sha256+ OK
## Checking hash(es) for Image atf-4 ... sha256+ OK
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-405-gb52c2eadd:derrick.huang
NOTICE:  BL31: Built : 11:23:47, Aug 15 2022
INFO:    spec: 0x1
INFO:    ext 32k is not valid
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0xa00000
INFO:    SPSR = 0x3c9
ns16550_serial serial@feb50000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19


U-Boot 2024.04-armbian (Jun 05 2024 - 18:19:27 +0000)

Model: FriendlyElec NanoPC-T6
DRAM:  16 GiB (effective 15.7 GiB)
Core:  338 devices, 30 uclasses, devicetree: separate
MMC:   mmc@fe2c0000: 1, mmc@fe2e0000: 0
Loading Environment from SPIFlash... SF: Detected w25q256fw with page size 256 Bytes, erase size 4 KiB, total 32 MiB
*** Warning - bad CRC, using default environment

In:    serial@feb50000
Out:   serial@feb50000
Err:   serial@feb50000
Model: FriendlyElec NanoPC-T6
rockchip_dnl_key_pressed: no saradc device found
Net:   No ethernet found.
Hit any key to stop autoboot:  0
Scanning for bootflows in all bootdevs
Seq  Method       State   Uclass    Part  Name                      Filename
--nning global bootmeth 'efi_mgr':
Card did not respond to voltage select! : -110
No EFI system partition
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
  0  efi_mgr      ready   (none)       0  <NULL>
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 0' failed
EFI boot manager: Cannot load any image
Boot failed (err=-14)
Scanning bootdev '[email protected]':
Card did not respond to voltage select! : -110
Scanning bootdev '[email protected]':
  1  script       ready   mmc          1  [email protected] /boot/boot.scr
** Booting bootflow '[email protected]_1' with script
Boot script loaded from mmc 0:1
162 bytes read in 12 ms (12.7 KiB/s)
36460099 bytes read in 222 ms (156.6 MiB/s)
39406080 bytes read in 234 ms (160.6 MiB/s)
164777 bytes read in 33 ms (4.8 MiB/s)
Working FDT set to 12000000
Trying kaslrseed command... Info: Unknown command can be safely ignored since kaslrseed does not apply to all boards.
Unknown c
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDi Bytes = 34.8 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 12000000
   Booting using the fdt blob at 0x12000000
Working FDT set to 12000000
   Loading Ramdisk to ea8d2000, end ecb97603 ... OK
   Loading Device Tree to 00000000ea841000, end 00000000ea8d1fff ... OK
Working FDT set to ea841000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 6.8.12-edge-rockchip-rk3588 (armbian@next) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~2.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #22 SMP PREEMPT Thu M3 UTC 2024
[    0.000000] KASLR disabled due to lack of seed
[ Machine model: FriendlyElec NanoPC-T6