I got Arch Linux ARM installed on a Lenovo Chromebook Duet! I mostly used the instructions from the Arch Wiki as reference.
- Enable Linux development environment in Chrome OS's settings
- Get it running
This comes with Debian by default, but this guide will install Arch Linux alongside that.
(ctrl-alt-t)
# ^ Opens the crosh shell
#
# › crosh>
vmc start termina
vsh termina
# ^ Enters the Linux VM ("termina"). From this VM, we
# will create an LXC container from the Arch Linux image.
#
# › (termina) chronos@localhost ~ $
lxc remote add images-uk https://uk.images.linuxcontainers.org --protocol simplestreams --auth-type tls
lxc remote list
# ^ Optional: adds a UK mirror if that's closer to you.
# This can be skipped; use `images:` rather than `images-uk:`
# in the next step.
#
# > | NAME | URL | PROTOCOL | AUTH TYPE | PUBLIC | STATIC |
# | images | https://images.linuxcontainers.org | simplestreams | none | YES | NO |
# | images-uk | https://uk.images.linuxcontainers.org | simplestreams | none | YES | NO |
lxc launch images-uk:archlinux/current arch
# ^ Creates the LXC container with Arch Linux.
# This will take a LONG time.
#
# › Creating arch
# Starting arch
lxc list
# ^ It should now be started and in this list after that.
#
# > | NAME | STATE | IPV4 | IPV6 | TYPE | SNAPSHOTS |
# | arch | RUNNING | | | PERSISTENT | 0 |
# | penguin | STOPPED | | | PERSISTENT | 0 |
lxc exec arch bash
# ^ Enter the container.
# If you see the prompt below, you're now in Arch!
#
# > [root@arch ~]#There's already a default user (alarm). I renamed that to my own preferred name.
grep 1000:1000 /etc/passwd
# ^ Shows the default user. It's usually `alarm` for
# the ARM build, but I haven't tried it elsewhere.
#
# > alarm
groupmod -n rsc alarm
usermod -d /home/rsc -l rsc -m -c rsc alarm
# ^ Rename that user. I name mine `rsc`. This should
# be the same username that was used to set up the
# default Debian environment.
passwd rsc
# ^ Change passwd
visudo
# ^ Uncomment the line that says:
# %wheel ALL=(ALL) NOPASSWD ALL
usermod -aG wheel rsc
# ^ Gives sudo rights to userNetworking doesn't work by default (try pinging out), and this was what I did to turn it on.
# ^ We should still be in the root shell inside Arch
# [root@arch ~]#
ip -4 a show dev eth0
# ^ See if there's a network connection.
# non-empty output = good (skip)
# empty output = proceed below
dhcpcd eth0
ping 8.8.8.8
# ^ Connects to the internet. It if works, ping should
# start giving some results.
#
# > dhcpcd-9.4.0 starting
# ...
# forked in background, child pid 122
#
# > 64 bytes from 8.8.8.8: icmp_seq=1 ttl=53 time=27.6ms
# ...
pacman -Syu dhclient
systemctl enable --now dhclient@eth0
# ^ use dhclient to auto-connect eth0 on startupNow that there's a user (rsc), I logged on directly with it and did the first system update (pacman -Syu).
exit
# ^ Go back to termina if you're still inside Arch
# > (termina) chronos@localhost ~ $
lxc exec arch su - rsc
# ^ Log in as the user
#
# > [rsc@arch ~]$
sudo nano /etc/pacman.d/mirrorlist
# ^ Optional: Use a closer mirror. Eg, change
# mirror.archlinuxarm.org => au.mirror.archlinuxarm.org
#
# A full list of mirrors are in this page:
# https://archlinuxarm.org/about/mirrors
sudo nano /etc/pacman.conf
# ^ Optional: Update pacman config. I prefer to:
# - uncomment #Color
# - uncomment #VerbosePkgLists
# - uncomment #ParallelDownloads = 5
sudo pacman -Syu base-devel git curl make neovim wl-clipboard fish
# ^ Installs some packages# This step requires `base-devel`, which was installed
# in a previous step. If there are errors about
# fakeroot, try: sudo pacman -Syu base-devel
git clone https://aur.archlinux.org/yay.git
cd yay
makepkg -sicros-container-guest-tools allows X apps to work. It can be installed using yay.
yay -S cros-container-guest-tools-git
cp -r /etc/skel/.config/pulse ~/.config/pulse
# ^ As directed by the post-install message. This will
# enable audio to wor.
yay -S xorg-xwayland
yay -S mousepad
# ^ Install a basic text editor so we can test it out
exit
# ^ Go back to termina
# (termina) chronos@localhost ~ $
lxc console arch
# ^ Log in via tty. This has no colours, but it
# will be necessary to start/enable user services.
#
# > To detach from the console, press: <ctrl>+a q
# arch login: rsc
# password:
# [rsc@arch ~]$
systemctl enable --now --user sommelier{,-x}@{0,1}.service
# ^ Starts and enables X11 and Wayland bridges
#
# > Created symlink /home/rsc/.config/systemd/user/default.target.wants/[email protected] -> /usr/lib/systemd/user/[email protected].
# Created symlink /home/rsc/.config/systemd/user/default.target.wants/[email protected] -> /usr/lib/systemd/user/[email protected].
# Created symlink /home/rsc/.config/systemd/user/default.target.wants/[email protected] -> /usr/lib/systemd/user/[email protected].
# Created symlink /home/rsc/.config/systemd/user/default.target.wants/[email protected] -> /usr/lib/systemd/user/[email protected].
mousepad
# ^ If it worked, this will open up a mousepad window
The default image is Debian (penguin), but we can move that away and make Arch the default. To do this, we'll rename the LXC image to penguin.
# ^ Start in termina
# (termina) chronos@localhost ~ $
lxc list
lxc stop arch
lxc stop penguin
# ^ Stop all LXC containers that are `RUNNING`
lxc rename penguin google
lxc rename arch penguin
# ^ Swap out the names
exit
# ^ Go back to crosh
# > crosh>
vmc list
vmc stop termina
vmc stop dev
# ^ Stop all VMs
# ... after this, run the Terminal and it should boot
# up with your user
i was following the instructions on the arch wiki too but im stuck trying to enable the network
the wiki says that the error should be fixed in the actual version of the kernel but im out of luck and kinda lost