HarvsG

Shortcut and On/Off switches

1. Remove back cover with philips scredriver and instert provided battery
2. In home assistant select a ZHA always-on zigbee device - such as a powered light or signal repeater in the same room the shortcut button will end up in
3. Select "Add device via this device"
4. Press the pair button 4 times on the back of the shortcut button
5. Wait
6. If using an On/Off switch and you want to bind it to a bulb for non-controller dependant control (i.e will work if home assistant is down)

Pairing On/Off Switches to IKEA Bulbs