dump1090_sdrplus HackRF patch

dump1090_sdrplus-hackrf.patch

from https://github.com/itemir/dump1090_sdrplus/releases/tag/HackRF_One

diff --git a/dump1090.c b/dump1090.c
index 7fa5327..01cea88 100644
--- a/dump1090.c
+++ b/dump1090.c
@@ -2,6 +2,8 @@
  *
  * Copyright (C) 2012 by Salvatore Sanfilippo <[email protected]>
  *
+ * HackRF One support added by Ilker Temir <[email protected]>
+ *
  * All rights reserved.
  * 
  * Redistribution and use in source and binary forms, with or without
@@ -44,6 +46,7 @@
 #include <sys/ioctl.h>
 #include <sys/select.h>
 #include "rtl-sdr.h"
+#include "libhackrf/hackrf.h"
 #include "anet.h"
 
 #define MODES_DEFAULT_RATE         2000000
@@ -54,6 +57,11 @@
 #define MODES_DATA_LEN             (16*16384)   /* 256k */
 #define MODES_AUTO_GAIN            -100         /* Use automatic gain. */
 #define MODES_MAX_GAIN             999999       /* Use max available gain. */
+/* HackRF One Defaults */
+#define MODES_ENABLE_AMP 	   0
+#define MODES_LNA_GAIN 	           32
+#define MODES_VGA_GAIN 	           48
+
 
 #define MODES_PREAMBLE_US 8       /* microseconds */
 #define MODES_LONG_MSG_BITS 112
@@ -138,10 +146,20 @@ struct {
     int exit;                       /* Exit from the main loop when true. */
 
     /* RTLSDR */
+    int rtl_enabled;
     int dev_index;
     int gain;
     int enable_agc;
     rtlsdr_dev_t *dev;
+
+    /* HackRF One*/
+    int hackrf_enabled;
+    int enable_amp;
+    int lna_gain;
+    int vga_gain;
+    hackrf_device *hackrf;
+
+    /* SDR Common */
     int freq;
 
     /* Networking */
@@ -260,6 +278,9 @@ void modesInitConfig(void) {
     Modes.gain = MODES_MAX_GAIN;
     Modes.dev_index = 0;
     Modes.enable_agc = 0;
+    Modes.enable_amp = MODES_ENABLE_AMP;
+    Modes.lna_gain = MODES_LNA_GAIN;
+    Modes.vga_gain = MODES_VGA_GAIN;
     Modes.freq = MODES_DEFAULT_FREQ;
     Modes.filename = NULL;
     Modes.fix_errors = 1;
@@ -331,7 +352,7 @@ void modesInit(void) {
 
 /* =============================== RTLSDR handling ========================== */
 
-void modesInitRTLSDR(void) {
+int modesInitRTLSDR(void) {
     int j;
     int device_count;
     int ppm_error = 0;
@@ -340,7 +361,7 @@ void modesInitRTLSDR(void) {
     device_count = rtlsdr_get_device_count();
     if (!device_count) {
         fprintf(stderr, "No supported RTLSDR devices found.\n");
-        exit(1);
+        return(1);
     }
 
     fprintf(stderr, "Found %d device(s):\n", device_count);
@@ -353,7 +374,7 @@ void modesInitRTLSDR(void) {
     if (rtlsdr_open(&Modes.dev, Modes.dev_index) < 0) {
         fprintf(stderr, "Error opening the RTLSDR device: %s\n",
             strerror(errno));
-        exit(1);
+        return(1);
     }
 
     /* Set gain, frequency, sample rate, and reset the device. */
@@ -381,6 +402,52 @@ void modesInitRTLSDR(void) {
     rtlsdr_reset_buffer(Modes.dev);
     fprintf(stderr, "Gain reported by device: %.2f\n",
         rtlsdr_get_tuner_gain(Modes.dev)/10.0);
+    Modes.rtl_enabled = 1;
+    Modes.hackrf_enabled = 0;
+    return (0);
+}
+
+/* =============================== HackRF One handling ========================== */
+int modesInitHackRF(void) {
+    #define HACKRF_STATUS(status, message) \
+        if (status != 0) { \
+            fprintf(stderr, "%s\n", message); \
+            hackrf_close(Modes.hackrf); \
+            hackrf_exit(); \
+            return (1); \
+        } \
+
+    int status;
+
+    status = hackrf_init();
+    HACKRF_STATUS(status, "hackrf_init failed.");
+
+    status = hackrf_open(&Modes.hackrf);
+    HACKRF_STATUS(status, "No HackRF compatible devices found.");
+
+    status = hackrf_set_freq(Modes.hackrf, Modes.freq);
+    HACKRF_STATUS(status, "hackrf_set_freq failed.");
+
+    status = hackrf_set_sample_rate(Modes.hackrf, MODES_DEFAULT_RATE);
+    HACKRF_STATUS(status, "hackrf_set_sample_rate failed.");
+
+    status = hackrf_set_amp_enable(Modes.hackrf, Modes.enable_amp);
+    HACKRF_STATUS(status, "hackrf_set_amp_enable failed.");
+
+    status = hackrf_set_lna_gain(Modes.hackrf, Modes.lna_gain);
+    HACKRF_STATUS(status, "hackrf_set_lna_gain failed.");
+
+    status = hackrf_set_vga_gain(Modes.hackrf, Modes.vga_gain);
+    HACKRF_STATUS(status, "hackrf_set_vga_gain failed");
+
+    fprintf (stderr, "HackRF successfully initialized "
+                     "(AMP Enable: %i, LNA Gain: %i, VGA Gain: %i).\n",
+                     Modes.enable_amp, Modes.lna_gain, Modes.vga_gain);
+
+    Modes.hackrf_enabled = 1;
+    Modes.rtl_enabled = 0;
+
+    return (0);
 }
 
 /* We use a thread reading data in background, while the main thread
@@ -405,6 +472,27 @@ void rtlsdrCallback(unsigned char *buf, uint32_t len, void *ctx) {
     pthread_mutex_unlock(&Modes.data_mutex);
 }
 
+int hackrfCallback (hackrf_transfer *transfer) {
+    uint32_t i;
+    pthread_mutex_lock(&Modes.data_mutex);
+    uint32_t len = transfer-> buffer_length;
+    /* HackRF One returns signed IQ values, convert them to unsigned */
+    for (i = 0; i < len; i++) {
+        transfer->buffer[i] ^= (uint8_t)0x80;
+    }
+    if (len > MODES_DATA_LEN) len = MODES_DATA_LEN;
+    /* Move the last part of the previous buffer, that was not processed,
+     * on the start of the new buffer. */
+    memcpy(Modes.data, Modes.data+MODES_DATA_LEN, (MODES_FULL_LEN-1)*4);
+    /* Read the new data. */
+    memcpy(Modes.data+(MODES_FULL_LEN-1)*4, transfer->buffer, len);
+    Modes.data_ready = 1;
+    /* Signal to the other thread that new data is ready */
+    pthread_cond_signal(&Modes.data_cond);
+    pthread_mutex_unlock(&Modes.data_mutex);
+    return (0);
+}
+
 /* This is used when --ifile is specified in order to read data from file
  * instead of using an RTLSDR device. */
 void readDataFromFile(void) {
@@ -457,9 +545,20 @@ void *readerThreadEntryPoint(void *arg) {
     MODES_NOTUSED(arg);
 
     if (Modes.filename == NULL) {
-        rtlsdr_read_async(Modes.dev, rtlsdrCallback, NULL,
+        if (Modes.rtl_enabled) {
+            rtlsdr_read_async(Modes.dev, rtlsdrCallback, NULL,
                               MODES_ASYNC_BUF_NUMBER,
                               MODES_DATA_LEN);
+        } 
+        else if (Modes.hackrf_enabled) {
+            int status = hackrf_start_rx(Modes.hackrf, hackrfCallback, NULL);
+            if (status != 0) { 
+                fprintf(stderr, "hackrf_start_rx failed"); 
+                hackrf_close(Modes.hackrf); 
+                hackrf_exit(); 
+                exit (1); 
+            } 
+        }       
     } else {
         readDataFromFile();
     }
@@ -2419,8 +2518,11 @@ int getTermRows() {
 void showHelp(void) {
     printf(
 "--device-index <index>   Select RTL device (default: 0).\n"
-"--gain <db>              Set gain (default: max gain. Use -100 for auto-gain).\n"
-"--enable-agc             Enable the Automatic Gain Control (default: off).\n"
+"--gain <db>              Set RTLSDR gain (default: max gain. Use -100 for auto-gain).\n"
+"--enable-agc             Enable RTLSDR Automatic Gain Control (default: off).\n"
+"--enable-amp             Enable HackRF RX/TX RF amplifier (default: off).\n"
+"--lna-gain               Set HackRF RX LNA (IF) gain, 0-40dB, 8dB steps (default: 32).\n"
+"--vga-gain               Set HackRF RX VGA (baseband) gain, 0-62dB, 2dB steps (default: 48).\n"
 "--freq <hz>              Set frequency (default: 1090 Mhz).\n"
 "--ifile <filename>       Read data from file (use '-' for stdin).\n"
 "--interactive            Interactive mode refreshing data on screen.\n"
@@ -2490,6 +2592,12 @@ int main(int argc, char **argv) {
             Modes.gain = atof(argv[++j])*10; /* Gain is in tens of DBs */
         } else if (!strcmp(argv[j],"--enable-agc")) {
             Modes.enable_agc++;
+        } else if (!strcmp(argv[j],"--enable-amp")) {
+            Modes.enable_amp = 1;
+        } else if (!strcmp(argv[j],"--lna-gain")) {
+            Modes.lna_gain =  atoi(argv[++j]);
+        } else if (!strcmp(argv[j],"--vga-gain")) {
+            Modes.vga_gain =  atoi(argv[++j]);
         } else if (!strcmp(argv[j],"--freq") && more) {
             Modes.freq = strtoll(argv[++j],NULL,10);
         } else if (!strcmp(argv[j],"--ifile") && more) {
@@ -2568,7 +2676,13 @@ int main(int argc, char **argv) {
     if (Modes.net_only) {
         fprintf(stderr,"Net-only mode, no RTL device or file open.\n");
     } else if (Modes.filename == NULL) {
-        modesInitRTLSDR();
+        if ( modesInitRTLSDR() ) {
+            /* No RTLSDR found, check for HackRF One */
+            if ( modesInitHackRF() ) {
+                //fprintf(stderr,"You need a compatible SDR device.\n");
+                exit (1);
+            }
+        }
     } else {
         if (Modes.filename[0] == '-' && Modes.filename[1] == '\0') {
             Modes.fd = STDIN_FILENO;