Last active
November 12, 2020 07:54
-
-
Save ryo/124acf7d8fbe3895dbfd28a83139f353 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 1.0000000] NetBSD/evbarm (fdt) booting ... | |
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, | |
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, | |
[ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. | |
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 | |
[ 1.0000000] The Regents of the University of California. All rights reserved. | |
[ 1.0000000] NetBSD 9.99.75 (GENERIC64) #220: Thu Nov 12 16:36:51 JST 2020 | |
[ 1.0000000] ryo@subq:/usr/src/sys/arch/evbarm/compile/GENERIC64 | |
[ 1.0000000] total memory = 3896 MB | |
[ 1.0000000] avail memory = 3775 MB | |
[ 1.0000000] entropy: no seed from bootloader | |
[ 1.0000000] armfdt0 (root) | |
[ 1.0000000] simplebus0 at armfdt0: Hardkernel ODROID-N2 | |
[ 1.0000000] simplebus1 at simplebus0 | |
[ 1.0000000] cpus0 at simplebus0 | |
[ 1.0000000] simplebus2 at simplebus0 | |
[ 1.0000000] psci0 at simplebus0: PSCI 1.0 | |
[ 1.0000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0 | |
[ 1.0000000] cpufreqdt0 at cpu0 | |
[ 1.0000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1 | |
[ 1.0000000] cpufreqdt1 at cpu1 | |
[ 1.0000000] cpu2 at cpus0: Arm Cortex-A73 r0p2 (v8-A), id 0x100 | |
[ 1.0000000] cpufreqdt2 at cpu2 | |
[ 1.0000000] cpu3 at cpus0: Arm Cortex-A73 r0p2 (v8-A), id 0x101 | |
[ 1.0000000] cpufreqdt3 at cpu3 | |
[ 1.0000000] cpu4 at cpus0: Arm Cortex-A73 r0p2 (v8-A), id 0x102 | |
[ 1.0000000] cpufreqdt4 at cpu4 | |
[ 1.0000000] cpu5 at cpus0: Arm Cortex-A73 r0p2 (v8-A), id 0x103 | |
[ 1.0000000] cpufreqdt5 at cpu5 | |
[ 1.0000000] simplebus3 at simplebus1 | |
[ 1.0000000] simplebus4 at simplebus1 | |
[ 1.0000000] simplebus5 at simplebus1 | |
[ 1.0000000] simplebus6 at simplebus3 | |
[ 1.0000000] simplebus7 at simplebus3 | |
[ 1.0000000] simplebus8 at simplebus3 | |
[ 1.0000000] simplebus9 at simplebus3 | |
[ 1.0000000] simplebus10 at simplebus3 | |
[ 1.0000000] gic0 at simplebus1: GIC | |
[ 1.0000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (238 valid) | |
[ 1.0000000] armgic0: 16 Priorities, 224 SPIs, 6 PPIs, 8 SGIs | |
[ 1.0000000] syscon0 at simplebus6: System Controller Registers | |
[ 1.0000000] syscon1 at simplebus5: System Controller Registers | |
[ 1.0000000] fclock0 at simplebus0: 24000000 Hz fixed clock (xtal) | |
[ 1.0000000] syscon2 at simplebus5: System Controller Registers | |
[ 1.0000000] gtmr0 at simplebus0: Generic Timer | |
[ 1.0000000] gtmr0: interrupting on GIC irq 27 | |
[ 1.0000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual) | |
[ 1.0000030] g12clkc0 at syscon0: Meson G12B clock controller | |
[ 1.0000030] mesonresets0 at simplebus4 | |
[ 1.0000030] mesonpinctrl0 at simplebus7: Meson G12A periphs GPIO | |
[ 1.0000030] mesonpinctrl0: usb-hub-reset GPIOH_4 set to output (high) | |
[ 1.0000030] gpio0 at mesonpinctrl0: 85 pins | |
[ 1.0000030] mesonpinctrl1 at syscon2: Meson G12A AO GPIO | |
[ 1.0000030] gpio1 at mesonpinctrl1: 15 pins | |
[ 1.0000030] g12aoclkc0 at syscon2: Meson G12A AO clock controller | |
[ 1.0000030] fregulator0 at simplebus0: 5V | |
[ 1.0000030] fregulator1 at simplebus0: HUB_5V | |
[ 1.0000030] fregulator2 at simplebus0: TFLASH_VDD | |
[ 1.0000030] gregulator0 at simplebus0: TF_IO | |
[ 1.0000030] fregulator3 at simplebus0: VCC_3V3 | |
[ 1.0000030] fregulator4 at simplebus0: FLASH_1V8 | |
[ 1.0000030] fregulator5 at simplebus0: USB_PWR_EN | |
[ 1.0000030] fregulator6 at simplebus0: 12V | |
[ 1.0000030] fregulator7 at simplebus0: VDDAO_3V3 | |
[ 1.0000030] mesonuart0 at simplebus5: console | |
[ 1.0000030] mesonuart0: interrupting on GIC irq 225 | |
[ 1.0000030] fregulator8 at simplebus0: VCC_1V8 | |
[ 1.0000030] fregulator9 at simplebus0: VDDAO_1V8 | |
[ 1.0000030] mmcpwrseq0 at simplebus0: eMMC hardware reset provider | |
[ 1.0000030] /soc/bus@ff600000/bus@3c000/system-controller@0/power-controller at syscon0 not configured | |
[ 1.0000030] /secure-monitor at simplebus0 not configured | |
[ 1.0000030] /soc/bus@ff600000/phy@46000 at simplebus3 not configured | |
[ 1.0000030] /soc/bus@ff600000/temperature-sensor@34800 at simplebus3 not configured | |
[ 1.0000030] /soc/bus@ff600000/temperature-sensor@34c00 at simplebus3 not configured | |
[ 1.0000030] /soc/gpu@ffe40000 at simplebus1 not configured | |
[ 1.0000030] /soc/bus@ff600000/mdio-multiplexer@4c000 at simplebus3 not configured | |
[ 1.0000030] /soc/vpu@ff900000 at simplebus1 not configured | |
[ 1.0000030] dispcon0 at simplebus0: HDMI connector | |
[ 1.0000030] awge0 at simplebus1: Gigabit Ethernet Controller | |
[ 1.0000030] awge0: interrupting on GIC irq 40 | |
[ 1.0000030] awge0: Core version: 00001137 | |
[ 1.0000030] awge0: Ethernet address 00:1e:06:42:6e:1a | |
[ 1.0000030] awge0: HW feature mask: 100d4f37 | |
[ 1.0000030] rgephy0 at awge0 phy 0: RTL8211F 1000BASE-T media interface | |
[ 1.0000030] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto | |
[ 1.0000030] /soc/bus@ffd00000/interrupt-controller@f080 at simplebus4 not configured | |
[ 1.0000030] /soc/bus@ff600000/bus@42000/clock-controller@0 at simplebus8 not configured | |
[ 1.0000030] /soc/bus@ff600000/bus@42000/reset-controller@280 at simplebus8 not configured | |
[ 1.0000030] /soc/bus@ff600000/hdmi-tx@0 at simplebus3 not configured | |
[ 1.0000030] /soc/bus@ff600000/bus@38000/video-lut@48 at simplebus9 not configured | |
[ 1.0000030] /soc/bus@ff600000/phy@36000 at simplebus3 not configured | |
[ 1.0000030] /soc/bus@ff600000/phy@3a000 at simplebus3 not configured | |
[ 1.0000030] /regulator-vddcpu-b at simplebus0 not configured | |
[ 1.0000030] /opp-table-0 at simplebus0 not configured | |
[ 1.0000030] /regulator-vddcpu-a at simplebus0 not configured | |
[ 1.0000030] /opp-table-1 at simplebus0 not configured | |
[ 1.0000030] /soc/bus@ffd00000/pwm@1b000 at simplebus4 not configured | |
[ 1.0000030] /soc/bus@ff800000/pwm@2000 at simplebus5 not configured | |
[ 1.0000030] /soc/bus@ff600000/bus@42000/audio-controller@540 at simplebus8 not configured | |
[ 1.0000030] /soc/bus@ff600000/bus@42000/audio-controller@1c0 at simplebus8 not configured | |
[ 1.0000030] /soc/bus@ff600000/bus@42000/audio-controller@200 at simplebus8 not configured | |
[ 1.0000030] /soc/bus@ff600000/bus@42000/audio-controller@240 at simplebus8 not configured | |
[ 1.0000030] /audio-controller-1 at simplebus0 not configured | |
[ 1.0000030] /soc/bus@ff600000/bus@42000/audio-controller@744 at simplebus8 not configured | |
[ 1.0000030] genfb0 at simplebus2: Simple Framebuffer (720x576 32-bpp @ 0xf4e5b000) | |
[ 1.0000030] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) | |
[ 1.0000030] /efuse at simplebus0 not configured | |
[ 1.0000030] mesonrng0 at simplebus10: Hardware RNG | |
[ 1.0000030] entropy: ready | |
[ 1.0000030] /soc/bus@ff800000/rtc@0a8 at simplebus5 not configured | |
[ 1.0000030] /soc/bus@ff800000/cec@280 at simplebus5 not configured | |
[ 1.0000030] /soc/bus@ff800000/ir@8000 at simplebus5 not configured | |
[ 1.0000030] /soc/bus@ffd00000/clock-measure@18000 at simplebus4 not configured | |
[ 1.0000030] /soc/sd@ffe05000 at simplebus1 not configured | |
[ 1.0000030] /soc/mmc@ffe07000 at simplebus1 not configured | |
[ 1.0000030] /soc/usb@ffe09000 at simplebus1 not configured | |
[ 1.0000030] gpioleds0 at simplebus0: n2:blue | |
[ 1.0000030] /sound at simplebus0 not configured | |
[ 1.4930163] cpufreqdt0: couldn't acquire cpu-supply | |
[ 1.5030178] cpufreqdt1: couldn't acquire cpu-supply | |
[ 1.5030178] cpufreqdt2: couldn't acquire cpu-supply | |
[ 1.5130176] cpufreqdt3: couldn't acquire cpu-supply | |
[ 1.5130176] cpufreqdt4: couldn't acquire cpu-supply | |
[ 1.5230178] cpufreqdt5: couldn't acquire cpu-supply | |
[ 1.5530202] WARNING: 6 errors while detecting hardware; check system log. | |
[ 1.5530202] boot device: <unknown> | |
[ 1.5530202] root device: awge0 | |
[ 3.8030656] dump device: | |
[ 3.9230681] file system (default generic): | |
[ 4.0480830] nfs_boot: trying DHCP/BOOTP | |
[ 7.0431310] nfs_boot: DHCP next-server: 0.0.0.0 | |
[ 7.0431310] nfs_boot: my_name=n2 | |
[ 7.0431310] nfs_boot: my_domain=nerv.org | |
[ 7.0531319] nfs_boot: my_addr=172.17.4.110 | |
[ 7.0531319] nfs_boot: my_mask=255.255.0.0 | |
[ 7.0531319] nfs_boot: gateway=172.17.4.40 | |
[ 13.0532529] root on 172.17.4.40:/src/boot/n2 | |
[ 13.0532529] root file system type: nfs | |
[ 13.0532529] kern.module.path=/stand/evbarm/9.99.75/modules | |
[ 13.0632537] WARNING: no TOD clock present | |
[ 13.0632537] WARNING: using filesystem time | |
[ 13.0749722] WARNING: CHECK AND RESET THE DATE! | |
[ 13.0749722] init path (default /sbin/init): | |
[ 15.1533025] init: trying /sbin/init | |
/etc/rc.conf is not configured. Multiuser boot aborted. | |
Enter pathname of shell or RETURN for /bin/sh: | |
We recommend that you create a non-root account and use su(1) for root access. | |
n2# uname -ap | |
NetBSD n2 9.99.75 NetBSD 9.99.75 (GENERIC64) #220: Thu Nov 12 16:36:51 JST 2020 ryo@subq:/usr/src/sys/arch/evbarm/compile/GENERIC64 evbarm aarch64 | |
n2# top -1|head -20 | |
load averages: 0.00, 0.00, 0.00; up 0+00:01:13 07:37:53 | |
5 processes: 4 sleeping, 1 on CPU | |
CPU0 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle | |
CPU1 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle | |
CPU2 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle | |
CPU3 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle | |
CPU4 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle | |
CPU5 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle | |
Memory: 3332K Act, 1748K Exec, 256K File, 3748M Free, 3751M Total | |
Swap: | |
PID USERNAME PRI NICE SIZE RES STATE START TIME WCPU CPU COMMAND | |
0 root 124 0 0K 22M syncer/3 2020-11-12 07:37:24 0:00 0.39% 0.29% [system] | |
1 root 85 0 14M 924K wait/3 2020-11-12 07:37:24 0:02 0.00% 0.00% init | |
169 root 43 0 14M 1204K CPU/3 2020-11-12 07:37:52 0:00 0.00% 0.00% top | |
162 root 85 0 18M 1568K wait/2 2020-11-12 07:37:26 0:00 0.00% 0.00% sh | |
170 root 85 0 13M 932K pipe_r/4 2020-11-12 07:37:52 0:00 0.00% 0.00% head | |
n2# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment