Skip to content

Instantly share code, notes, and snippets.

@ryo
Created November 4, 2020 21:41
Show Gist options
  • Save ryo/6fbeef4a48605e1ab576af8dd4c5d339 to your computer and use it in GitHub Desktop.
Save ryo/6fbeef4a48605e1ab576af8dd4c5d339 to your computer and use it in GitHub Desktop.
[ 1.0000000] NetBSD/evbarm (fdt) booting ...
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 9.99.75 (GENERIC64) #42: Thu Nov 5 06:33:55 JST 2020
[ 1.0000000] ryo@subq:/usr/src/sys/arch/evbarm/compile/GENERIC64
[ 1.0000000] total memory = 3896 MB
[ 1.0000000] avail memory = 3775 MB
[ 1.0000000] entropy: no seed from bootloader
[ 1.0000000] armfdt0 (root)
[ 1.0000000] simplebus0 at armfdt0: Hardkernel ODROID-N2
[ 1.0000000] simplebus1 at simplebus0
[ 1.0000000] cpus0 at simplebus0
[ 1.0000000] simplebus2 at simplebus0
[ 1.0000000] psci0 at simplebus0: PSCI 1.0
[ 1.0000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0
[ 1.0000000] cpufreqdt0 at cpu0
[ 1.0000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1
[ 1.0000000] cpufreqdt1 at cpu1
[ 1.0000000] cpu2 at cpus0: Arm Cortex-A73 r0p2 (v8-A), id 0x100
[ 1.0000000] cpufreqdt2 at cpu2
[ 1.0000000] cpu3 at cpus0: Arm Cortex-A73 r0p2 (v8-A), id 0x101
[ 1.0000000] cpufreqdt3 at cpu3
[ 1.0000000] cpu4 at cpus0: Arm Cortex-A73 r0p2 (v8-A), id 0x102
[ 1.0000000] cpufreqdt4 at cpu4
[ 1.0000000] cpu5 at cpus0: Arm Cortex-A73 r0p2 (v8-A), id 0x103
[ 1.0000000] cpufreqdt5 at cpu5
[ 1.0000000] simplebus3 at simplebus1
[ 1.0000000] simplebus4 at simplebus1
[ 1.0000000] simplebus5 at simplebus1
[ 1.0000000] simplebus6 at simplebus3
[ 1.0000000] simplebus7 at simplebus3
[ 1.0000000] simplebus8 at simplebus3
[ 1.0000000] simplebus9 at simplebus3
[ 1.0000000] simplebus10 at simplebus3
[ 1.0000000] gic0 at simplebus1: GIC
[ 1.0000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (238 valid)
[ 1.0000000] armgic0: 16 Priorities, 224 SPIs, 6 PPIs, 8 SGIs
[ 1.0000000] syscon0 at simplebus6: System Controller Registers
[ 1.0000000] syscon1 at simplebus5: System Controller Registers
[ 1.0000000] fclock0 at simplebus0: 24000000 Hz fixed clock (xtal)
[ 1.0000000] syscon2 at simplebus5: System Controller Registers
[ 1.0000000] gtmr0 at simplebus0: Generic Timer
[ 1.0000000] gtmr0: interrupting on GIC irq 27
[ 1.0000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual)
[ 1.0000030] mesonpinctrl0 at simplebus7: Meson G12A periphs GPIO
[ 1.0000030] mesonpinctrl0: usb-hub-reset GPIOH_4 set to output (high)
[ 1.0000030] gpio0 at mesonpinctrl0: 85 pins
[ 1.0000030] mesonpinctrl1 at syscon2: Meson G12A AO GPIO
[ 1.0000030] gpio1 at mesonpinctrl1: 15 pins
[ 1.0000030] fregulator0 at simplebus0: 5V
[ 1.0000030] fregulator1 at simplebus0: HUB_5V
[ 1.0000030] fregulator2 at simplebus0: TFLASH_VDD
[ 1.0000030] gregulator0 at simplebus0: TF_IO
[ 1.0000030] fregulator3 at simplebus0: VCC_3V3
[ 1.0000030] fregulator4 at simplebus0: FLASH_1V8
[ 1.0000030] fregulator5 at simplebus0: USB_PWR_EN
[ 1.0000030] fregulator6 at simplebus0: 12V
[ 1.0000030] fregulator7 at simplebus0: VDDAO_3V3
[ 1.0000030] mesonuart0 at simplebus5: console
[ 1.0000030] mesonuart0: interrupting on GIC irq 225
[ 1.0000030] fregulator8 at simplebus0: VCC_1V8
[ 1.0000030] fregulator9 at simplebus0: VDDAO_1V8
[ 1.0000030] mmcpwrseq0 at simplebus0: eMMC hardware reset provider
[ 1.0000030] /soc/bus@ff600000/bus@3c000/system-controller@0/clock-controller at syscon0 not configured
[ 1.0000030] /soc/bus@ff600000/bus@3c000/system-controller@0/power-controller at syscon0 not configured
[ 1.0000030] /secure-monitor at simplebus0 not configured
[ 1.0000030] /soc/bus@ffd00000/reset-controller@1004 at simplebus4 not configured
[ 1.0000030] /soc/bus@ff600000/phy@46000 at simplebus3 not configured
[ 1.0000030] /soc/bus@ff600000/temperature-sensor@34800 at simplebus3 not configured
[ 1.0000030] /soc/bus@ff600000/temperature-sensor@34c00 at simplebus3 not configured
[ 1.0000030] /soc/gpu@ffe40000 at simplebus1 not configured
[ 1.0000030] /soc/bus@ff600000/mdio-multiplexer@4c000 at simplebus3 not configured
[ 1.0000030] /soc/vpu@ff900000 at simplebus1 not configured
[ 1.0000030] dispcon0 at simplebus0: HDMI connector
[ 1.0000030] awge0 at simplebus1: couldn't get clocks
[ 1.0000030] /soc/bus@ffd00000/interrupt-controller@f080 at simplebus4 not configured
[ 1.0000030] /soc/bus@ff600000/bus@42000/clock-controller@0 at simplebus8 not configured
[ 1.0000030] /soc/bus@ff600000/bus@42000/reset-controller@280 at simplebus8 not configured
[ 1.0000030] /soc/bus@ff800000/sys-ctrl@0/clock-controller at syscon2 not configured
[ 1.0000030] /soc/bus@ff600000/hdmi-tx@0 at simplebus3 not configured
[ 1.0000030] /soc/bus@ff600000/bus@38000/video-lut@48 at simplebus9 not configured
[ 1.0000030] /soc/bus@ff600000/phy@36000 at simplebus3 not configured
[ 1.0000030] /soc/bus@ff600000/phy@3a000 at simplebus3 not configured
[ 1.0000030] /regulator-vddcpu-b at simplebus0 not configured
[ 1.0000030] /opp-table-0 at simplebus0 not configured
[ 1.0000030] /regulator-vddcpu-a at simplebus0 not configured
[ 1.0000030] /opp-table-1 at simplebus0 not configured
[ 1.0000030] /soc/bus@ffd00000/pwm@1b000 at simplebus4 not configured
[ 1.0000030] /soc/bus@ff800000/pwm@2000 at simplebus5 not configured
[ 1.0000030] /soc/bus@ff600000/bus@42000/audio-controller@540 at simplebus8 not configured
[ 1.0000030] /soc/bus@ff600000/bus@42000/audio-controller@1c0 at simplebus8 not configured
[ 1.0000030] /soc/bus@ff600000/bus@42000/audio-controller@200 at simplebus8 not configured
[ 1.0000030] /soc/bus@ff600000/bus@42000/audio-controller@240 at simplebus8 not configured
[ 1.0000030] /audio-controller-1 at simplebus0 not configured
[ 1.0000030] /soc/bus@ff600000/bus@42000/audio-controller@744 at simplebus8 not configured
[ 1.0000030] genfb0 at simplebus2: Simple Framebuffer (720x576 32-bpp @ 0xf4e5b000)
[ 1.0000030] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[ 1.0000030] /efuse at simplebus0 not configured
[ 1.0000030] mesonrng0 at simplebus10: Hardware RNG
[ 1.0000030] entropy: ready
[ 1.0000030] /soc/bus@ff800000/rtc@0a8 at simplebus5 not configured
[ 1.0000030] /soc/bus@ff800000/cec@280 at simplebus5 not configured
[ 1.0000030] /soc/bus@ff800000/ir@8000 at simplebus5 not configured
[ 1.0000030] /soc/bus@ffd00000/clock-measure@18000 at simplebus4 not configured
[ 1.0000030] /soc/sd@ffe05000 at simplebus1 not configured
[ 1.0000030] /soc/mmc@ffe07000 at simplebus1 not configured
[ 1.0000030] /soc/usb@ffe09000 at simplebus1 not configured
[ 1.0000030] gpioleds0 at simplebus0: n2:blue
[ 1.0000030] /sound at simplebus0 not configured
[ 1.8878541] cpufreqdt0: couldn't acquire cpu-supply
[ 1.8978560] cpufreqdt1: couldn't acquire cpu-supply
[ 1.8978560] cpufreqdt2: couldn't acquire cpu-supply
[ 1.9078554] cpufreqdt3: couldn't acquire cpu-supply
[ 1.9078554] cpufreqdt4: couldn't acquire cpu-supply
[ 1.9178557] cpufreqdt5: couldn't acquire cpu-supply
[ 1.9378553] WARNING: 7 errors while detecting hardware; check system log.
[ 1.9378553] boot device: <unknown>
[ 1.9478556] root device:
[ 3.4378905] use one of: awge0 ddb halt reboot
[ 3.4378905] root device:
[ 3.8278997] use one of: awge0 ddb halt reboot
[ 3.8278997] root device: ddb
Stopped in pid 0.0 (system) at netbsd:cpu_Debugger+0x4: ret
db{3}>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment