Created
December 26, 2014 06:15
-
-
Save ryo/8413837f5d1ce828d10b to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ## Starting application at 0x10800000 ... | |
| PC=0x10800024 | |
| SP=0xff34fd70 | |
| CPSR=0x600001d3 | |
| <cortex_init>@ABC12-</cortex_init> | |
| <mmu_init_table></mmu_init_table> | |
| <arm_cpuinit>FG01H1IJKLM</arm_cpuinit> | |
| @ABC12-FG01H1IJKLM@ABC12-FG01H1IJKLM@ABC12-FG01H1IJKLM | |
| MULTIPROCESSOR hatched! | |
| jump to start() | |
| uboot arg = 0x1, 0xff65720c, 0xff65720c, 0x10800000 | |
| NetBSD/evbarm (nitrogen6) booting ... | |
| initarm: Configuring system (4 cpus, hatched 0xe), CLIDR=1110000003 CTR=0x83338003 | |
| memsize=3221225472 | |
| arm32_bootmem_init: memstart=0x10000000, memsize=0xc0000000, kernelstart=0x10800000 | |
| arm32_bootmem_init: kernelend=0x10e70000 | |
| arm32_bootmem_init: adding 391368 free pages: [0x10e70000..0xcfffffff] (VA 0x80e70000) | |
| arm32_bootmem_init: adding 1024 free pages: [0x10000000..0x107fffff] (VA 0x80000000) | |
| arm32_kernel_vm_init: 1 L2 pages are needed to map 0x6c2000 kernel bytes | |
| arm32_kernel_vm_init: allocating page tables for kerneladd_pages: adding pv 0x80e4cb14 (pa 0x10e70000, va 0x80e70000, 2 pages) at tail | |
| add_pages: appending pv 0x80e4d7b8 (0x10e74000..0x10e75fff) to 0x10e70000..0x10e73fff | |
| vmadd_pages: appending pv 0x80e4d7cc (0x10e76000..0x10e77fff) to 0x10e70000..0x10e75fff | |
| add_pages: appending pv 0x80e4d7e0 (0x10e78000..0x10e79fff) to 0x10e70000..0x10e77fff | |
| add_pages: appending pv 0x80e4d7f4 (0x10e7a000..0x10e7bfff) to 0x10e70000..0x10e79fff | |
| add_pages: appending pv 0x80e4d808 (0x10e7c000..0x10e7dfff) to 0x10e70000..0x10e7bfff | |
| add_pages: appending pv 0x80e4d81c (0x10e7e000..0x10e7ffff) to 0x10e70000..0x10e7dfff | |
| add_pages: appending pv 0x80e4d830 (0x10e80000..0x10e81fff) to 0x10e70000..0x10e7ffff | |
| add_pages: appending pv 0x80e4d844 (0x10e82000..0x10e83fff) to 0x10e70000..0x10e81fff | |
| add_pages: appending pv 0x80e4d858 (0x10e84000..0x10e85fff) to 0x10e70000..0x10e83fff | |
| arm32_kernel_vm_init: allocating stacks | |
| add_pages: appending pv 0x80e4db00 (0x10e86000..0x10e8dfff) to 0x10e70000..0x10e85fff | |
| add_pages: appending pv 0x80e4daec (0x10e8e000..0x10e95fff) to 0x10e70000..0x10e8dfff | |
| add_pages: appending pv 0x80e4dad8 (0x10e96000..0x10e9dfff) to 0x10e70000..0x10e95fff | |
| add_pages: appending pv 0x80e4dac4 (0x10e9e000..0x10ea5fff) to 0x10e70000..0x10e9dfff | |
| add_pages: appending pv 0x80e4dab0 (0x10ea6000..0x10eadfff) to 0x10e70000..0x10ea5fff | |
| add_pages: appending pv 0x80e4db14 (0x10eae000..0x10eaffff) to 0x10e70000..0x10eadfff | |
| add_pages: appending pv 0x80e4cb58 (0x10eb0000..0x10eb3fff) to 0x10e70000..0x10eaffff | |
| Creating L1 page table at 0x10e70000 | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80e74000, PA 0x10e74000) for VA 0x80800000 (kernel) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80e76000, PA 0x10e76000) for VA 0xc0000000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80e78000, PA 0x10e78000) for VA 0xc0800000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80e7a000, PA 0x10e7a000) for VA 0xc1000000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80e7c000, PA 0x10e7c000) for VA 0xc1800000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80e7e000, PA 0x10e7e000) for VA 0xc2000000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80e80000, PA 0x10e80000) for VA 0xc2800000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80e82000, PA 0x10e82000) for VA 0xc3000000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80e84000, PA 0x10e84000) for VA 0xc3800000 (vm) | |
| Mapping kernel | |
| arm32_kernel_vm_init: adding chunk for kernel text 0x10800000..0x10d47fff (VA 0x80800000) | |
| add_pages: adding pv 0x80e4cb00 (pa 0x10800000, va 0x80800000, 676 pages) before pa 0x10e70000 | |
| arm32_kernel_vm_init: adding chunk for kernel data/bss 0x10d48000..0x10e6ffff (VA 0x80d48000) | |
| add_pages: appending pv 0x80e4cb80 (0x10d48000..0x10e6ffff) to 0x10800000..0x10d47fff | |
| add_pages: merging pv 0x80e4cb14 (0x10e70000..0x10eb3fff) to 0x10800000..0x10e6ffff | |
| Listing Chunks | |
| arm32_kernel_vm_init: pv 0x80e4cb00: chunk VA 0x80800000..0x80eb3fff (PA 0x10800000, prot 3, cache 1) | |
| Mapping Chunks | |
| arm32_kernel_vm_init: mapping last chunk VA 0x80800000..0x80eb3fff (PA 0x10800000, prot 3, cache 1) | |
| pmap_map_chunk: pa=0x10800000 va=0x80800000 size=0x6b4000 resid=0x6b4000 prot=0x3 cache=1 | |
| SSSSSSLLLLLLLLLLLPP | |
| devmap: 02000000 -> 021fffff @ ff000000 | |
| pmap_map_chunk: pa=0x2000000 va=0xff000000 size=0x200000 resid=0x200000 prot=0x3 cache=0 | |
| SS | |
| devmap: 00a00000 -> 00afffff @ ff200000 | |
| pmap_map_chunk: pa=0xa00000 va=0xff200000 size=0x100000 resid=0x100000 prot=0x3 cache=0 | |
| S | |
| Physical Virtual Num | |
| Starting Ending Starting Ending Pages | |
| SDRAM: 0x10000000 0xcfffffff 0x80000000 0x3fffffff 393216 | |
| text section: 0x10800000 0x10d47fff 0x80800000 0x80d47fff 676 | |
| data section: 0x10d50000 0x10e4c400 0x80d50000 0x80e4c400 127 | |
| bss section: 0x10e4c400 0x10e6f5c8 0x80e4c400 0x80e6f5c8 18 | |
| L1 page directory: 0x10e70000 0x10e73fff 0x80e70000 0x80e73fff 2 | |
| ABT stack (CPU 0): 0x10e86000 0x10e87fff 0x80e86000 0x80e87fff 1 | |
| FIQ stack (CPU 0): 0x10e8e000 0x10e8ffff 0x80e8e000 0x80e8ffff 1 | |
| IRQ stack (CPU 0): 0x10e96000 0x10e97fff 0x80e96000 0x80e97fff 1 | |
| UND stack (CPU 0): 0x10e9e000 0x10e9ffff 0x80e9e000 0x80e9ffff 1 | |
| IDLE stack (CPU 0): 0x10ea6000 0x10ea7fff 0x80ea6000 0x80ea7fff 1 | |
| SVC stack: 0x10eae000 0x10eaffff 0x80eae000 0x80eaffff 1 | |
| Message Buffer: 0x10eb0000 0x10eb3fff 0x80eb0000 0x80eb3fff 2 | |
| Free Memory: 0x10eb4000 0xcfffffff 391334 | |
| Free Memory: 0x10000000 0x107fffff 1024 | |
| TTBR0=0x1fffc05b TTBR1=0x1fffc05b TTBCR=0x1 CONTEXTIDR=0 | |
| switching to new L1 page table @0x10e70000... ttb (TTBCR=0x11 TTBR0=0x10e7005b TTBR1=0x10e7005b) hatchlingscpu_boot_secondary_processors: writing mbox with 0xe | |
| OK | |
| nfreeblocks = 2, free_pages = 392358 (0x5fca6) | |
| bootstrap done. | |
| vectors vbar=0x80bcd960 0x80bcd960 | |
| init subsystems: stacks vectors undefined page pmap_physload pmap kpm tlb0 kcpusets locks l1pt cache(l1pt) specials pools [ Kernel symbol table missing! ] | |
| done. | |
| Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, | |
| 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 | |
| The NetBSD Foundation, Inc. All rights reserved. | |
| Copyright (c) 1982, 1986, 1989, 1991, 1993 | |
| The Regents of the University of California. All rights reserved. | |
| NetBSD 7.99.3 (NITROGEN6MAX) #38: Fri Dec 26 15:11:17 JST 2014 | |
| ryo@phenomena:/src/cvs/NetBSD/sys/arch/evbarm/compile/NITROGEN6MAX | |
| total memory = 3072 MB | |
| avail memory = 3035 MB | |
| sysctl_createv: sysctl_create(machine_arch) returned 17 | |
| mainbus0 (root) | |
| cpu0 at mainbus0 core 0: 792 MHz Cortex-A9 r3p10 (Cortex V7A core) | |
| cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled | |
| cpu0: 32KB/32B 4-way L1 VIPT Instruction cache | |
| cpu0: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache | |
| cpu0: 1024KB/32B 16-way write-back-locking-D L2 PIPT Unified cache | |
| vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals | |
| cpu1 at mainbus0 core 1 | |
| cpu2 at mainbus0 core 2 | |
| cpu3 at mainbus0 core 3 | |
| armperiph0 at mainbus0 | |
| arml2cc0 at armperiph0: ARM PL310 r3p1a L2 Cache Controller (disabled) | |
| arml2cc0: cache enabled | |
| armgic0 at armperiph0: Generic Interrupt Controller, 160 sources (149 valid) | |
| armgic0: 32 Priorities, 128 SPIs, 5 PPIs, 16 SGIs | |
| a9tmr0 at armperiph0: A9 Global 64-bit Timer (396 MHz) | |
| a9tmr0: interrupting on irq 27 | |
| axi0 at mainbus0: Advanced eXtensible Interface | |
| imxccm0 at axi0 addr 0x20c4000: Clock Control Module | |
| imxocotp0 at axi0 addr 0x21bc000: On-Chip OTP Controller | |
| imxocotp0: OCOTP_VERSION 2.0.0 | |
| imxgpio0 at axi0 addr 0x209c000 intr 98 irqbase 256: interrupts 256..287 | |
| imxgpio1 at axi0 addr 0x20a0000 intr 100 irqbase 288: interrupts 288..319 | |
| imxgpio2 at axi0 addr 0x20a4000 intr 102 irqbase 320: interrupts 320..351 | |
| imxgpio3 at axi0 addr 0x20a8000 intr 104 irqbase 352: interrupts 352..383 | |
| imxgpio4 at axi0 addr 0x20ac000 intr 106 irqbase 384: interrupts 384..415 | |
| imxgpio5 at axi0 addr 0x20b0000 intr 108 irqbase 416: interrupts 416..447 | |
| imxgpio6 at axi0 addr 0x20b4000 intr 110 irqbase 448: interrupts 448..479 | |
| imxiomux0 at axi0 addr 0x20e0000: IOMUX Controller | |
| imxuart0 at axi0 addr 0x2020000 intr 58 | |
| imxuart1 at axi0 addr 0x21e8000 intr 59 | |
| imxuart1: console | |
| ahcisata0 at axi0 addr 0x2200000 intr 71: AHCI Controller | |
| ahcisata0: AHCI revision 1.30, 1 port, 32 slots, CAP 0x6f26ff80<CCCS,PSC,SSC,PMD,SPM,SAM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ> | |
| atabus0 at ahcisata0 channel 0 | |
| imxwdog0 at axi0 addr 0x20bc000 intr 112: i.MX Watchdog Timer, default period is 10 seconds | |
| imxi2c0 at axi0 addr 0x21a0000 intr 68: i.MX IIC bus controller | |
| iic0 at imxi2c0: I2C bus | |
| imxi2c1 at axi0 addr 0x21a4000 intr 69: i.MX IIC bus controller | |
| iic1 at imxi2c1: I2C bus | |
| imxi2c2 at axi0 addr 0x21a8000 intr 70: i.MX IIC bus controller | |
| iic2 at imxi2c2: I2C bus | |
| enet0 at axi0 addr 0x2188000 intr 150: Gigabit Ethernet Controller | |
| enet0: Ethernet address 00:19:b8:01:97:1a | |
| micphy0 at enet0 phy 6: Micrel KSZ9021RNI 10/100/1000 PHY, rev. 1 | |
| micphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto | |
| imxusbc0 at axi0 addr 0x2184000: Universal Serial Bus Controller | |
| ehci0 at imxusbc0 unit 0 intr 75: i.MX USB Controller | |
| ehci0: id=5 revision=1 HCI revision=0x100 | |
| ehci0: 1 host port, device capable, 8 endpoints | |
| usb0 at ehci0: USB revision 2.0 | |
| ehci1 at imxusbc0 unit 1 intr 72: i.MX USB Controller | |
| ehci1: id=5 revision=1 HCI revision=0x100 | |
| ehci1: 1 host port | |
| usb1 at ehci1: USB revision 2.0 | |
| imxsnvs0 at axi0 addr 0x20cc000: Secure Non-Volatile Storage | |
| cpu_boot_secondary_processors: writing mbox with 0xe | |
| cpu_hatch(cpu1): cpu_hatch(cpu3): cpu_hatch(cpu2): vectors vectors vectors vbar=0x80bcd960 vbar=0x80bcd960 stacks stacks tlb tlbcpu1 vbar=0x80bcd960 stacks tlb: 792 MHz Cortex-A9 r3p10 (Cortex V7A core) | |
| cpu1: DC enabled IC enabled WB disabled EABT branch prediction enabled | |
| cpu1: 32KB/32B 4-way L1 VIPT Instruction cache | |
| cpu1: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache | |
| cpu1: 1024KB/32B 16-way write-back-locking-D L2 PIPT Unified cache | |
| vfpvfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals | |
| interruptscpu2 md(0x80952060) done! | |
| : 792 MHz Cortex-A9 r3p10 (Cortex V7A core) | |
| cpu2: DC enabled IC enabled WB disabled EABT branch prediction enabled | |
| cpu2: 32KB/32B 4-way L1 VIPT Instruction cache | |
| cpu2: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache | |
| cpu2: 1024KB/32B 16-way write-back-locking-D L2 PIPT Unified cache | |
| vfpvfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals | |
| interruptscpu3 md(0x80952060) done! | |
| : 792 MHz Cortex-A9 r3p10 (Cortex V7A core) | |
| cpu3: DC enabled IC enabled WB disabled EABT branch prediction enabled | |
| cpu3: 32KB/32B 4-way L1 VIPT Instruction cache | |
| cpu3: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache | |
| cpu3: 1024KB/32B 16-way write-back-locking-D L2 PIPT Unified cache | |
| vfpvfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals | |
| interrupts md(0x80952060) done! | |
| gpio0 at imxgpio0: 32 pins | |
| gpio1 at imxgpio1: 32 pins | |
| gpio2 at imxgpio2: 32 pins | |
| gpio3 at imxgpio3: 32 pins | |
| gpio4 at imxgpio4: 32 pins | |
| gpio5 at imxgpio5: 32 pins | |
| gpio6 at imxgpio6: 32 pins | |
| uhub0 at usb0: i.MX EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 | |
| uhub1 at usb1: i.MX EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 | |
| boot device: <unknown> | |
| root device: enet0 | |
| dump device: | |
| file system (default generic): | |
| root on enet0 | |
| nfs_boot: trying static | |
| nfs_boot: client_addr=172.30.185.28 | |
| nfs_boot: gateway=172.30.185.12 | |
| nfs_boot: netmask=255.255.255.0 | |
| nfs_boot: server=172.30.185.12 | |
| nfs_boot: root=172.30.185.12:/src/boot/nitromax | |
| root on 172.30.185.12:/src/boot/nitromax | |
| root file system type: nfs | |
| kern.module.path=/stand/evbarm/7.99.3/modules | |
| init path (default /sbin/init): | |
| init: trying /sbin/init | |
| Mon Dec 22 16:51:11 JST 2014 | |
| Not checking /: fs_passno = 0 in /etc/fstab | |
| Starting file system checks: | |
| Setting tty flags. | |
| Setting sysctl variables: | |
| Starting network. | |
| Hostname: max | |
| IPv6 mode: host | |
| Configuring network interfaces:. | |
| Adding interface aliases:. | |
| route: writing to routing socket: Network is unreachable | |
| add net default: gateway 172.31.185.69: Network is unreachable | |
| Building databases: dev, utmp, utmpx. | |
| Mounting all filesystems... | |
| Clearing temporary files. | |
| Updating fontconfig cache: done. | |
| Creating a.out runtime link editor directory cache. | |
| Checking quotas: done. | |
| swapctl: adding /var/swapfile as swap device at priority 0 | |
| Starting virecover. | |
| Checking for core dump... | |
| savecore: no core dump (no dumpdev) | |
| Starting local daemons:. | |
| Updating motd. | |
| Starting sshd. | |
| Starting inetd. | |
| Starting cron. | |
| Mon Dec 22 16:51:20 JST 2014 | |
| NetBSD/evbarm (max) (console) | |
| login: root | |
| Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, | |
| 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 | |
| The NetBSD Foundation, Inc. All rights reserved. | |
| Copyright (c) 1982, 1986, 1989, 1991, 1993 | |
| The Regents of the University of California. All rights reserved. | |
| NetBSD 7.99.3 (NITROGEN6MAX) #38: Fri Dec 26 15:11:17 JST 2014 | |
| Welcome to NetBSD! | |
| Terminal type is vt100. | |
| We recommend that you create a non-root account and use su(1) for root access. | |
| max# top -1|cat | |
| load averages: 0.13, 0.03, 0.01; up 0+00:00:51 16:51:30 | |
| 9 processes: 7 sleeping, 2 on CPU | |
| CPU0 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle | |
| CPU1 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle | |
| CPU2 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle | |
| CPU3 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle | |
| Memory: 14M Act, 4112K Exec, 5928K File, 3012M Free | |
| Swap: 1024M Total, 1024M Free | |
| PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND | |
| 0 root 0 0 0K 5144K CPU/3 0:01 0.00% 0.15% [system] | |
| 335 root 43 0 4224K 1504K CPU/0 0:00 0.00% 0.00% top | |
| 280 root 85 0 8816K 2992K wait/0 0:00 0.00% 0.00% login | |
| 286 root 85 0 9840K 2344K select/2 0:00 0.00% 0.00% sshd | |
| 319 root 85 0 4008K 1776K wait/0 0:00 0.00% 0.00% sh | |
| 325 root 85 0 3800K 1328K nanosl/3 0:00 0.00% 0.00% cron | |
| 305 root 85 0 4032K 1264K kqueue/3 0:00 0.00% 0.00% inetd | |
| 330 root 85 0 3648K 1016K pipe_r/3 0:00 0.00% 0.00% cat | |
| 1 root 84 0 3912K 1200K wait/0 0:00 0.00% 0.00% init | |
| max# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment