Created
July 28, 2014 19:32
-
-
Save ryo/b3f10b909b9a5ca0cdb5 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot 2009.08-00495-g10adc6d (Apr 24 2012 - 13:27:04) | |
| CPU: Freescale i.MX 6 family 0.0V at 792 MHz | |
| Temperature: can't get valid data! | |
| mx6q pll1: 792MHz | |
| mx6q pll2: 528MHz | |
| mx6q pll3: 480MHz | |
| mx6q pll8: 50MHz | |
| ipg clock : 66000000Hz | |
| ipg per clock : 66000000Hz | |
| uart clock : 80000000Hz | |
| cspi clock : 60000000Hz | |
| ahb clock : 132000000Hz | |
| axi clock : 264000000Hz | |
| emi_slow clock: 29333333Hz | |
| ddr clock : 528000000Hz | |
| usdhc1 clock : 200000000Hz | |
| usdhc2 clock : 200000000Hz | |
| usdhc3 clock : 200000000Hz | |
| usdhc4 clock : 200000000Hz | |
| nfc clock : 24000000Hz | |
| Board: MX6Q-SABRELITE:[ POR] | |
| Boot Device: I2C | |
| I2C: ready | |
| DRAM: 1 GB | |
| MMC: FSL_USDHC: 0,FSL_USDHC: 1 | |
| JEDEC ID: 0xbf:0x25:0x41 | |
| Reading SPI NOR flash 0xc0000 [0x2000 bytes] -> ram 0x276009b8 | |
| SUCCESS | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| Checking for recovery command file... | |
| ** Bad partition 6 ** | |
| Card did not respond to voltage select! | |
| ** Bad partition 6 ** | |
| MMC Device 2 not found | |
| MMC Device 2 not found | |
| ** Block device MMC 2 not supported | |
| Net: got MAC address from IIM: 00:19:b8:00:f2:f8 | |
| FEC0 [PRIME] | |
| Hit any key to stop autoboot: 0 | |
| Found phy at 6 | |
| FEC: Link is Up 796d | |
| Using FEC0 device | |
| TFTP from server 172.31.185.12; our IP address is 172.31.185.22 | |
| Filename 'n'. | |
| Load address: 0x10800000 | |
| Loading: ################################################################# | |
| ################################################################# | |
| ################################### | |
| done | |
| Bytes transferred = 2407872 (24bdc0 hex) | |
| ## Starting application at 0x10800000 ... | |
| PC=0x1080001c | |
| SP=0x275ffe50 | |
| CPSR=0x600001d3 | |
| cortex_init <@ABC12-> ok | |
| mmu_init_table <> ok | |
| arm_cpuinit <FG01H1IJKLM> ok | |
| start() | |
| uboot arg = 0x1, 0x2760330c, 0x2760330c, 0x10800000 | |
| NetBSD/evbarm (nitrogen) booting ... | |
| initarm: Configuring system, CLIDR=1110000003 CTR=0x83338003 | |
| arm32_bootmem_init: memstart=0x10800000, memsize=0x3f800000, kernelstart=0x10800000 | |
| arm32_bootmem_init: kernelend=0x10a64000 | |
| arm32_bootmem_init: adding 129742 free pages: [0x10a64000..0x4fffffff] (VA 0x80a64000) | |
| arm32_kernel_vm_init: 0 L2 pages are needed to map 0x296000 kernel bytes | |
| arm32_kernel_vm_init: allocating page tables for kernel vmadd_pages: adding pv 0x80a4c4e4 (pa 0x10a64000, va 0x80a64000, 2 pages) at tail | |
| add_pages: appending pv 0x80a4c694 (0x10a68000..0x10a69fff) to 0x10a64000..0x10a67fff | |
| add_pages: appending pv 0x80a4c6a8 (0x10a6a000..0x10a6bfff) to 0x10a64000..0x10a69fff | |
| add_pages: appending pv 0x80a4c6bc (0x10a6c000..0x10a6dfff) to 0x10a64000..0x10a6bfff | |
| add_pages: appending pv 0x80a4c6d0 (0x10a6e000..0x10a6ffff) to 0x10a64000..0x10a6dfff | |
| add_pages: appending pv 0x80a4c6e4 (0x10a70000..0x10a71fff) to 0x10a64000..0x10a6ffff | |
| add_pages: appending pv 0x80a4c6f8 (0x10a72000..0x10a73fff) to 0x10a64000..0x10a71fff | |
| add_pages: appending pv 0x80a4c70c (0x10a74000..0x10a75fff) to 0x10a64000..0x10a73fff | |
| add_pages: appending pv 0x80a4c720 (0x10a76000..0x10a77fff) to 0x10a64000..0x10a75fff | |
| arm32_kernel_vm_init: allocating stacks | |
| add_pages: appending pv 0x80a4c9d8 (0x10a78000..0x10a79fff) to 0x10a64000..0x10a77fff | |
| add_pages: appending pv 0x80a4c9c4 (0x10a7a000..0x10a7bfff) to 0x10a64000..0x10a79fff | |
| add_pages: appending pv 0x80a4c9b0 (0x10a7c000..0x10a7dfff) to 0x10a64000..0x10a7bfff | |
| add_pages: appending pv 0x80a4c99c (0x10a7e000..0x10a7ffff) to 0x10a64000..0x10a7dfff | |
| add_pages: appending pv 0x80a4c988 (0x10a80000..0x10a81fff) to 0x10a64000..0x10a7ffff | |
| add_pages: appending pv 0x80a4c9ec (0x10a82000..0x10a83fff) to 0x10a64000..0x10a81fff | |
| add_pages: appending pv 0x80a4c520 (0x10a84000..0x10a87fff) to 0x10a64000..0x10a83fff | |
| Creating L1 page table at 0x10a64000 | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80a68000, PA 0x10a68000) for VA 0xc0800000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80a6a000, PA 0x10a6a000) for VA 0xc1000000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80a6c000, PA 0x10a6c000) for VA 0xc1800000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80a6e000, PA 0x10a6e000) for VA 0xc2000000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80a70000, PA 0x10a70000) for VA 0xc2800000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80a72000, PA 0x10a72000) for VA 0xc3000000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80a74000, PA 0x10a74000) for VA 0xc3800000 (vm) | |
| arm32_kernel_vm_init: adding L2 pt (VA 0x80a76000, PA 0x10a76000) for VA 0xc4000000 (vm) | |
| Mapping kernel | |
| arm32_kernel_vm_init: adding chunk for kernel text 0x10800000..0x10a3bfff (VA 0x80800000) | |
| add_pages: adding pv 0x80a4c4d0 (pa 0x10800000, va 0x80800000, 286 pages) before pa 0x10a64000 | |
| arm32_kernel_vm_init: adding chunk for kernel data/bss 0x10a3c000..0x10a63fff (VA 0x80a3c000) | |
| add_pages: appending pv 0x80a4c548 (0x10a3c000..0x10a63fff) to 0x10800000..0x10a3bfff | |
| add_pages: merging pv 0x80a4c4e4 (0x10a64000..0x10a87fff) to 0x10800000..0x10a63fff | |
| Listing Chunks | |
| arm32_kernel_vm_init: pv 0x80a4c4d0: chunk VA 0x80800000..0x80a87fff (PA 0x10800000, prot 3, cache 1) | |
| Mapping Chunks | |
| arm32_kernel_vm_init: mapping last chunk VA 0x80800000..0xbfffffff (PA 0x10800000, prot 3, cache 1) | |
| pmap_map_chunk: pa=0x10800000 va=0x80800000 size=0x3f800000 resid=0x3f800000 prot=0x3 cache=1 | |
| SSSSSSSSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsSsS | |
| devmap: 02000000 -> 021fffff @ ff000000 | |
| pmap_map_chunk: pa=0x2000000 va=0xff000000 size=0x200000 resid=0x200000 prot=0x3 cache=0 | |
| SS | |
| devmap: 00a00000 -> 00afffff @ ff200000 | |
| pmap_map_chunk: pa=0xa00000 va=0xff200000 size=0x100000 resid=0x100000 prot=0x3 cache=0 | |
| S | |
| Physical Virtual Num | |
| Starting Ending Starting Ending Pages | |
| SDRAM: 0x10800000 0x4fffffff 0x80800000 0xbfffffff 130048 | |
| text section: 0x10800000 0x10a3bfff 0x80800000 0x80a3bfff 286 | |
| data section: 0x10a40000 0x10a4bdc0 0x80a40000 0x80a4bdc0 6 | |
| bss section: 0x10a4bdc0 0x10a63f8c 0x80a4bdc0 0x80a63f8c 13 | |
| L1 page directory: 0x10a64000 0x10a67fff 0x80a64000 0x80a67fff 2 | |
| ABT stack (CPU 0): 0x10a78000 0x10a79fff 0x80a78000 0x80a79fff 1 | |
| FIQ stack (CPU 0): 0x10a7a000 0x10a7bfff 0x80a7a000 0x80a7bfff 1 | |
| IRQ stack (CPU 0): 0x10a7c000 0x10a7dfff 0x80a7c000 0x80a7dfff 1 | |
| UND stack (CPU 0): 0x10a7e000 0x10a7ffff 0x80a7e000 0x80a7ffff 1 | |
| IDLE stack (CPU 0): 0x10a80000 0x10a81fff 0x80a80000 0x80a81fff 1 | |
| SVC stack: 0x10a82000 0x10a83fff 0x80a82000 0x80a83fff 1 | |
| Message Buffer: 0x10a84000 0x10a87fff 0x80a84000 0x80a87fff 2 | |
| Free Memory: 0x10a88000 0x4fffffff 129724 | |
| TTBR0=0x4fffc05b TTBR1=0x4fffc05b TTBCR=0x1 CONTEXTIDR=0 | |
| switching to new L1 page table @0x10a64000... ttb (TTBCR=0x11 TTBR0=0x10a6405b TTBR1=0x10a6405b) OK | |
| nfreeblocks = 1, free_pages = 129724 (0x1fabc) | |
| bootstrap done. | |
| vectors vbar=0x809a5b80 0x809a5b80 | |
| init subsystems: stacks vectors undefined page pmap_physload pmap kpm tlb0 locks l1pt cache(l1pt) specials pools [ Kernel symbol table missing! ] | |
| done. | |
| Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, | |
| 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 | |
| The NetBSD Foundation, Inc. All rights reserved. | |
| Copyright (c) 1982, 1986, 1989, 1991, 1993 | |
| The Regents of the University of California. All rights reserved. | |
| NetBSD 6.99.49 (NITROGEN6X) #381: Tue Jul 29 04:27:05 JST 2014 | |
| ryo@phenomena:/src/cvs/NetBSD/sys/arch/evbarm/compile/NITROGEN6X | |
| total memory = 1016 MB | |
| avail memory = 1003 MB | |
| sysctl_createv: sysctl_create(machine_arch) returned 17 | |
| mainbus0 (root) | |
| cpu0 at mainbus0 core 0: 1 GHz Cortex-A9 r3p10 (Cortex V7A core) | |
| cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled | |
| cpu0: 32KB/32B 4-way L1 VIPT Instruction cache | |
| cpu0: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache | |
| cpu0: 1024KB/32B 16-way write-back-locking-D L2 PIPT Unified cache | |
| vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals | |
| armperiph0 at mainbus0 | |
| arml2cc0 at armperiph0: ARM PL310 r3p1a L2 Cache Controller (disabled) | |
| arml2cc0: cache enabled | |
| armgic0 at armperiph0: Generic Interrupt Controller, 160 sources (149 valid) | |
| armgic0: 32 Priorities, 128 SPIs, 5 PPIs, 16 SGIs | |
| a9tmr0 at armperiph0: A9 Global 64-bit Timer (792 MHz) | |
| a9tmr0: interrupting on irq 27 | |
| a9wdt0 at armperiph0: A9 Watchdog Timer, default period is 12 seconds | |
| axi0 at mainbus0: Advanced eXtensible Interface | |
| imxuart0 at axi0 addr 0x2020000 intr 58 | |
| imxuart1 at axi0 addr 0x21e8000 intr 59 | |
| imxuart1: console | |
| imxuart2 at axi0 addr 0x21ec000 intr 60 | |
| imxuart3 at axi0 addr 0x21f0000 intr 61 | |
| imxuart4 at axi0 addr 0x21f4000 intr 62 | |
| enet0 at axi0 addr 0x2188000 intr 150: Gigabit Ethernet Controller | |
| enet0: Ethernet address 00:19:b8:00:f2:f8 | |
| micphy0 at enet0 phy 6: Micrel KSZ9021RNI 10/100/1000 PHY, rev. 1 | |
| micphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto | |
| boot device: <unknown> | |
| root on enet0 | |
| nfs_boot: trying static | |
| nfs_boot: client_addr=172.31.185.23 | |
| nfs_boot: gateway=172.31.185.65 | |
| nfs_boot: netmask=255.255.255.0 | |
| nfs_boot: server=172.31.185.12 | |
| nfs_boot: root=172.31.185.12:/src/boot/nitro | |
| enet0: link state DOWN (was UNKNOWN) | |
| root on 172.31.185.12:/src/boot/nitro | |
| root time: 0x506fee3b | |
| WARNING: no TOD clock present | |
| WARNING: using filesystem time | |
| WARNING: CHECK AND RESET THE DATE! | |
| init: copying out path `/sbin/init' 11 | |
| Sat Oct 6 08:39:23 UTC 2012 | |
| Not checking /: fs_passno = 0 in /etc/fstab | |
| Kernel RNG "sysctl" runs test FAILURE: too few runs of 2 0s (1114 < 1114) | |
| cprng sysctl: failed statistical RNG test | |
| Starting file system checks: | |
| Setting tty flags. | |
| WARNING: module error: vfs load failed for `wsdisplay', error 78 | |
| WARNING: module error: vfs load failed for `wsdisplay', error 78 | |
| WARNING: module error: vfs load failed for `wsdisplay', error 78 | |
| WARNING: module error: vfs load failed for `wsdisplay', error 78 | |
| WARNING: module error: vfs load failed for `com', error 78 | |
| WARNING: module error: vfs load failed for `com', error 78 | |
| Setting sysctl variables: | |
| ddb.onpanic: 1 -> 0 | |
| Starting network. | |
| /etc/rc: WARNING: $hostname not set. | |
| Configuring network interfaces:. | |
| Adding interface aliases:. | |
| Building databases: dev, utmp, utmpx. | |
| Starting syslogd. | |
| Mounting all filesystems... | |
| Clearing temporary files. | |
| Updating fontconfig cache: done. | |
| Creating a.out runtime link editor directory cache. | |
| Checking quotas: done. | |
| Setting securelevel: kern.securelevel: 0 -> 1 | |
| swapctl: WARNING: /var/swapfile is readable by the world | |
| swapctl: adding /var/swapfile as swap device at priority 0 | |
| Starting virecover. | |
| Checking for core dump... | |
| savecore: no core dump (no dumpdev) | |
| Starting local daemons:. | |
| Updating motd. | |
| postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db) | |
| newaliases: warning: inet_protocols: IPv6 support is disabled: Address family not supported by protocol family | |
| newaliases: warning: inet_protocols: configuring for IPv4 support only | |
| newaliases: warning: valid_hostname: empty hostname | |
| newaliases: fatal: unable to use my own hostname | |
| Oct 6 08:39:27 postfix/sendmail[285]: fatal: unable to use my own hostname | |
| /etc/rc.d/postfix exited with code 1 | |
| Starting inetd. | |
| Starting cron. | |
| The following components reported failures: | |
| /etc/rc.d/postfix | |
| See /var/run/rc.log for more information. | |
| Sat Oct 6 08:39:28 UTC 2012 | |
| NetBSD/evbarm (Amnesiac) (console) | |
| login: root | |
| Oct 6 08:39:30 login: ROOT LOGIN (root) on tty console | |
| Last login: Sat Oct 6 08:40:13 2012 on console | |
| Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, | |
| 2006, 2007, 2008, 2009, 2010, 2011, 2012 | |
| The NetBSD Foundation, Inc. All rights reserved. | |
| Copyright (c) 1982, 1986, 1989, 1991, 1993 | |
| The Regents of the University of California. All rights reserved. | |
| NetBSD 6.99.49 (NITROGEN6X) #381: Tue Jul 29 04:27:05 JST 2014 | |
| Welcome to NetBSD! | |
| Terminal type is vt100. | |
| We recommend that you create a non-root account and use su(1) for root access. | |
| # uname -a | |
| NetBSD 6.99.49 NetBSD 6.99.49 (NITROGEN6X) #381: Tue Jul 29 04:27:05 JST 2014 ryo@phenomena:/src/cvs/NetBSD/sys/arch/evbarm/compile/NITROGEN6X evbarm | |
| # |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment