Skip to content

Instantly share code, notes, and snippets.

@sahiljambhekar
Created July 19, 2022 05:21
Show Gist options
  • Save sahiljambhekar/4fdd353687037783b7cfebb0a4d86057 to your computer and use it in GitHub Desktop.
Save sahiljambhekar/4fdd353687037783b7cfebb0a4d86057 to your computer and use it in GitHub Desktop.
Golden zshrc for M1 Homebrew+sdkman+miniforge
# Fig pre block. Keep at the top of this file.
[[ -f "$HOME/.fig/shell/zshrc.pre.zsh" ]] && . "$HOME/.fig/shell/zshrc.pre.zsh"
# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
# Initialization code that may require console input (password prompts, [y/n]
# confirmations, etc.) must go above this block; everything else may go below.
typeset -g POWERLEVEL9K_INSTANT_PROMPT=quiet
typeset -g POWERLEVEL9K_INSTANT_PROMPT=off
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi
# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
source ~/.oh-my-zsh/custom/themes/powerlevel10k/powerlevel10k.zsh-theme
# Path to your oh-my-zsh installation.
export ZSH="$HOME/.oh-my-zsh"
#M1 Breew
export HOMEBREW_PREFIX="/opt/homebrew";
export HOMEBREW_CELLAR=f"${HOMEBREW_PREFIX}/Cellar";
export HOMEBREW_REPOSITORY=f"${HOMEBREW_PREFIX}";
export PATH="${HOMEBREW_PREFIX}/bin:${HOMEBREW_PREFIX}/sbin${PATH+:$PATH}";
export MANPATH=f"${HOMEBREW_PREFIX}/share/man${MANPATH+:$MANPATH}:";
export INFOPATH=f"${HOMEBREW_PREFIX}/share/info:${INFOPATH:-}";
#Other Paths
PYTHONPATH="$SPARK_HOME/python:$SPARK_HOME/python/lib/py4j-py4j-0.10.9.2-src.zip pyspark.zip:$PYTHONPATH"
export PATH="$PATH:$PYTHONPATH"
export PATH="/opt/homebrew/opt/llvm/bin:$PATH"
# Set name of the theme to load --- if set to "random", it will
# load a random theme each time oh-my-zsh is loaded, in which case,
# to know which specific one was loaded, run: echo $RANDOM_THEME
# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
ZSH_THEME="robbyrussell"
# Set list of themes to pick from when loading at random
# Setting this variable when ZSH_THEME=random will cause zsh to load
# a theme from this variable instead of looking in $ZSH/themes/
# If set to an empty array, this variable will have no effect.
# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )
# Uncomment the following line to use case-sensitive completion.
# CASE_SENSITIVE="true"
# Uncomment the following line to use hyphen-insensitive completion.
# Case-sensitive completion must be off. _ and - will be interchangeable.
# HYPHEN_INSENSITIVE="true"
# Uncomment one of the following lines to change the auto-update behavior
# zstyle ':omz:update' mode disabled # disable automatic updates
# zstyle ':omz:update' mode auto # update automatically without asking
# zstyle ':omz:update' mode reminder # just remind me to update when it's time
# Uncomment the following line to change how often to auto-update (in days).
# zstyle ':omz:update' frequency 13
# Uncomment the following line if pasting URLs and other text is messed up.
# DISABLE_MAGIC_FUNCTIONS="true"
# Uncomment the following line to disable colors in ls.
# DISABLE_LS_COLORS="true"
# Uncomment the following line to disable auto-setting terminal title.
# DISABLE_AUTO_TITLE="true"
# Uncomment the following line to enable command auto-correction.
# ENABLE_CORRECTION="true"
# Uncomment the following line to display red dots whilst waiting for completion.
# You can also set it to another string to have that shown instead of the default red dots.
# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
# COMPLETION_WAITING_DOTS="true"
# Uncomment the following line if you want to disable marking untracked files
# under VCS as dirty. This makes repository status check for large repositories
# much, much faster.
# DISABLE_UNTRACKED_FILES_DIRTY="true"
# Uncomment the following line if you want to change the command execution time
# stamp shown in the history command output.
# You can set one of the optional three formats:
# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
# or set a custom format using the strftime function format specifications,
# see 'man strftime' for details.
# HIST_STAMPS="mm/dd/yyyy"
# Would you like to use another custom folder than $ZSH/custom?
# ZSH_CUSTOM=/path/to/new-custom-folder
#### ZPLUG: https://github.com/zplug/zplug
export ZPLUG_HOME="${HOMEBREW_PREFIX}/opt/zplug"
source $ZPLUG_HOME/init.zsh
zplug "changyuheng/fz", defer:1
zplug "rupa/z", use:z.
# Supports oh-my-zsh plugins and the like
zplug "plugins/git", from:oh-my-zsh, defer:1
zplug "zsh-users/zsh-syntax-highlighting", defer:2
zplug "zsh-users/zsh-autosuggestions", defer:1
zplug "olets/command-execution-timer", defer:2
# Which plugins would you like to load?
# Standard plugins can be found in $ZSH/plugins/
# Custom plugins may be added to $ZSH_CUSTOM/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(
aws
history
fzf
zsh-z
web-search
jsontools
copyfile
dirhistory
)
#echo "Initializing oh-my-zsh.sh"
source $ZSH/oh-my-zsh.sh
# If you come from bash you might have to change your $PATH.
# export PATH=$HOME/bin:/usr/local/bin:$PATH
#SPARK
export SPARK_LOCAL_IP=127.0.0.1
#export SPARK_JAVA_HOME=11.0.15-tem
# User configuration
# export MANPATH="/usr/local/man:$MANPATH"
# You may need to manually set your language environment
# export LANG=en_US.UTF-8
# Preferred editor for local and remote sessions
# if [[ -n $SSH_CONNECTION ]]; then
# export EDITOR='vim'
# else
# export EDITOR='mvim'
# fi
# Compilation flags
export ARCH=aarch64
export ARCHFLAGS="-arch ${ARCH}"
# Set personal aliases, overriding those provided by oh-my-zsh libs,
# plugins, and themes. Aliases can be placed here, though oh-my-zsh
# users are encouraged to define aliases within the ZSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias zshconfig="mate ~/.zshrc"
# alias ohmyzsh="mate ~/.oh-my-zsh"
[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
# FZF
export FZF_DEFAULT_OPTS='--height 40%'
[ -f ~/.fzf.zsh ] && source ~/.fzf.zsh
export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm
# This loads nvm bash_com
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"
#THIS MUST BE AT THE END OF THE FILE FOR SDKMAN TO WORK!!!
export SDKMAN_DIR="$HOME/.sdkman"
[[ -s "$HOME/.sdkman/bin/sdkman-init.sh" ]] && source "$HOME/.sdkman/bin/sdkman-init.sh"
# >>> conda initialize >>>
CONDA_HOME=${HOME}/miniforge3
# !! Contents within this block are managed by 'conda init' !!
__conda_setup="$('/Users/sahiljambhekar/miniforge3/bin/conda' 'shell.zsh' 'hook' 2> /dev/null)"
if [ $? -eq 0 ]; then
eval "$__conda_setup"
else
if [ -f "${CONDA_HOME}/etc/profile.d/conda.sh" ]; then
. "${CONDA_HOME}/etc/profile.d/conda.sh"
else
export PATH="${CONDA_HOME}/bin:$PATH"
fi
fi
unset __conda_setup
# <<< conda initialize <<<
# Fig post block. Keep at the bottom of this file.
[[ -f "$HOME/.fig/shell/zshrc.post.zsh" ]] && . "$HOME/.fig/shell/zshrc.post.zsh"
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment