configuration-kata.toml

# XXX: Warning: this file is auto-generated from file "config/configuration.toml.in".

[hypervisor.qemu]
path = "/usr/bin/qemu-lite-system-x86_64"
kernel = "/usr/share/clear-containers/vmlinuz.container"
image = "/usr/share/clear-containers/clear-containers.img"
machine_type = "pc"
# Optional space-separated list of options to pass to the guest kernel.
# For example, use `kernel_params = "vsyscall=emulate"` if you are having
# trouble running pre-2.15 glibc
kernel_params = ""

# Path to the firmware.
# If you want that qemu uses the default firmware leave this option empty
firmware = ""

# Machine accelerators
# comma-separated list of machine accelerators to pass to the hypervisor.
# For example, `machine_accelerators = "nosmm,nosmbus,nosata,nopit,static-prt,nofw"`
machine_accelerators=""

# Default number of vCPUs per POD/VM:
# unspecified or 0 --> will be set to 1
# < 0              --> will be set to the actual number of physical cores
# > 0 <= 255       --> will be set to the specified number
# > 255            --> will be set to 255
default_vcpus = -1


# Bridges can be used to hot plug devices.
# Limitations:
# * Currently only pci bridges are supported
# * Until 30 devices per bridge can be hot plugged.
# * Until 5 PCI bridges can be cold plugged per VM.
#   This limitation could be a bug in qemu or in the kernel
# Default number of bridges per POD/VM:
# unspecified or 0   --> will be set to 1
# > 1 <= 5           --> will be set to the specified number
# > 5                --> will be set to 5
default_bridges = 1

# Default memory size in MiB for POD/VM.
# If unspecified then it will be set 2048 MiB.
default_memory = 512
disable_block_device_use = false

# Enable pre allocation of VM RAM, default false
# Enabling this will result in lower container density
# as all of the memory will be allocated and locked
# This is useful when you want to reserve all the memory
# upfront or in the cases where you want memory latencies
# to be very predictable
# Default false
#enable_mem_prealloc = true

# Enable huge pages for VM RAM, default false
# Enabling this will result in the VM memory
# being allocated using huge pages.
# This is useful when you want to use vhost-user network
# stacks within the container. This will automatically 
# result in memory pre allocation
#enable_hugepages = true

# Enable swap of vm memory. Default false.
# The behaviour is undefined if mem_prealloc is also set to true
#enable_swap = true

# Debug changes the default hypervisor and kernel parameters to
# enable debug output where available.
# Default false
# these logs can be obtained in the cc-proxy logs  when the 
# proxy is set to run in debug mode
# /usr/libexec/clear-containers/cc-proxy -log debug
# or by stopping the cc-proxy service and running the cc-proxy 
# explicitly using the same command line
# 
enable_debug = true

# Disable the customizations done in the runtime when it detects
# that it is running on top a VMM. This will result in the runtime
# behaving as it would when running on bare metal.
# 
#disable_nesting_checks = true

[proxy.kata]
path = "/usr/libexec/clear-containers/kata-proxy"

# If enabled, proxy messages will be sent to the system log
# (default: disabled)
enable_debug = true

[shim.kata]
path = "/usr/libexec/clear-containers/kata-shim"

# If enabled, shim messages will be sent to the system log
# (default: disabled)
enable_debug = true

[agent.kata]
# There is no field for this section. The goal is only to be able to
# specify which type of agent the user wants to use.

[runtime]
# If enabled, the runtime will log additional debug messages to the
# system log
# (default: disabled)
enable_debug = true