ZHA - Hue Dimmer Fully Configurable.yaml

blueprint:
  name: ZHA - Philips Hue Dimmer Switch Config - V2024.11.25
  description: |
    Control lights with a Philips Hue Dimmer Switch (only RWL020 (US) and RWL021 (EU), RWL022, the one that says 'hue' on the bottom, has a different button layout.)
    
    This blueprint is a simplified version of stefanroelofs's `ZHA - Philis Hue Dimmer Switch V2', but this one has no default inputs and with full configuration available. This makes the remote easily configurable for purposes other than controlling lights.
    
    If you are intending to just use it for use as a light switch, I recommend using his blueprint, which you can find at https://gist.github.com/stefanroelofs/775e2e0a3cdb3d72a9451fb247492d59
    
    It includes customizable 'on' button behaviour and default setup of the dimmer buttons to dim as they normally would. To make the configuration available for other automations, I had to remove these very useful functionalities.
    
    Please note that the Philips Hue Dimmer Switch also supports triple, quadruple, and even quintuple button presses. It's fairly easy to configure these yourself by editing this blueprint.
    
    Please also note that I am not much good at python and therefore probably cannot help you if this does not work. All credit for figuring out how all this works goes to stefanroelofs, vanstinator and warriorrocker. I just adapted their work to make the dimming buttons free to execute other actions. 
    
    Does this blueprint not work for you? Did you add your Hue dimmer to ZHA before July 2020?
    It might help to press the 'Reconfigure device' button on the ZHA Device info page.
    The naming of the command attribute in the zha_event was changed back then. 
  domain: automation
  source_url: https://gist.github.com/sandervv/f326ff3b2bcb945b5a9dc0bfb82e3308

  # Define the inputs for the blueprint
  input:
    remote:
      name: Philips Hue Dimmer Switch
      description: Pick either RWL020 (US) or RWL021 (EU)
      selector:
        device:
          integration: zha
          manufacturer: Philips
          entity:
            domain: sensor
            device_class: battery
# inputs for custom actions
    button_on_short_press:
      name: On button short press
      description: Action to run on short on button press.
      default: []
      selector:
        action:
    button_on_long_press:
      name: On button long press
      description: Action to run on long on button press.
      default: []
      selector:
        action:
    button_on_double_press:
      name: On button double press
      description: Action to run on double on button press.
      default: []
      selector:
        action:
    button_up_short_press:
      name: Up button short press
      description: Action to run on short up button press.
      default: []
      selector:
        action:
    button_up_long_press:
      name: Up button long press
      description: Action to run on long up button press.
      default: []
      selector:
        action:
    button_up_double_press:
      name: Up button double press
      description: Action to run on double up button press.
      default: []
      selector:
        action:
    button_down_short_press:
      name: Down button short press
      description: Action to run on short down button press.
      default: []
      selector:
        action:
    button_down_long_press:
      name: Down button long press
      description: Action to run on long down button press.
      default: []
      selector:
        action:
    button_down_double_press:
      name: Down button double press
      description: Action to run on double down button press.
      default: []
      selector:
        action:
    button_off_short_press:
      name: Off button short press
      description: Action to run on short off button press.
      default: []
      selector:
        action:
    button_off_long_press:
      name: Off button long press
      description: Action to run on long off button press.
      default: []
      selector:
        action:
    button_off_double_press:
      name: Off button double press
      description: Action to run on double off button press.
      default: []
      selector:
        action:

mode: parallel
max_exceeded: silent

# Trigger the automation when the selected dimmer remote sends an event
# Also only trigger on cluster_id 64512. This ignores the 'old' events with cluster_id 8.
trigger:
- platform: event
  event_type: zha_event
  event_data:
    device_id: !input 'remote'
    cluster_id: 64512

action:
  - variables:
      command        : '{{ trigger.event.data.command }}'
  
  - choose:
    - conditions: '{{ command == ''on_press'' }}'
      sequence: !input button_on_short_press

    - conditions: '{{ command == ''on_hold'' }}'
      sequence: !input button_on_long_press

    - conditions: '{{ command == ''on_double_press'' }}'
      sequence: !input button_on_double_press


    - conditions: '{{ command == ''off_press'' }}'
      sequence: !input button_off_short_press

    - conditions: '{{ command == ''off_hold'' }}'
      sequence: !input button_off_long_press

    - conditions: '{{ command == ''off_double_press'' }}'
      sequence: !input button_off_double_press


    - conditions: '{{ command == ''up_press'' }}'
      sequence: !input button_up_short_press

    - conditions: '{{ command == ''up_hold'' }}'
      sequence: !input button_up_long_press

    - conditions: '{{ command == ''up_double_press'' }}'
      sequence: !input button_up_double_press


    - conditions: '{{ command == ''down_press'' }}'
      sequence: !input button_down_short_press

    - conditions: '{{ command == ''down_hold'' }}'
      sequence: !input button_down_long_press

    - conditions: '{{ command == ''down_double_press'' }}'
      sequence: !input button_down_double_press

@xabarass @Diddman I've honestly got no idea - I see no breaking changes to ZHA or Zigbee mentioned in the 24.11 changelog. I haven't updated yet so we will see at that point, I guess. Very strange.

People on the HA forum have changed the mode from restart to parallelle in line 108 and it fixed it for some, i made that change and it fixed it for me

@Mortkaer your suggestion indeed fixed my issue, thanks a lot. Everything works completely fine now. Not sure if this change is backward compatible, but maybe it would make sense to update this gist @sandervv ?

@Mortkaer thank you for the suggestion! @xabarass I will try this locally on the older version I'm on and if it works on my end I'll update the gist for everyone. Appreciate you pointing this out!

Okay, updated with the change. Thank you again @Mortkaer for the tip! @xabarass you can re-import the blueprint through HA now (should show V2024.11.25) after and it should be resolved on the blueprint level (which also fixes your existing automations)

Hey thanks for your blueprint. I've started using it too.
2 small suggestions:

Starting from line 27 you could use the following syntax:

      selector:
        device:
          filter:
            - integration: zha
              manufacturer: Philips
          entity:
            - domain:
              - sensor
              device_class:
              - battery
          multiple: false

So add the filter keyword there. (more info here)

And on lines 113-114 you could use the following newer syntax:

triggers:
- trigger: event

These won't change anything. Just fix some red warning lines in VS code :) Thanks!