Home Assistant Blueprint: Wake-up light alarm with sunrise effect

wake-up-light-alarm-with-sunrise-effect.yaml

blueprint:
  name: Wake-up light alarm with sunrise effect
  description: 'A wake-up light alarm with a brightness and color temperature sunrise
    effect. Note: Requires date_time_iso sensor in configuration, not manually executable!'
  domain: automation
  input:
    light_entity:
      name: Wake-up light entity
      description: The light to control. Turning it off during the sunrise will keep
        it off. Color temperature range is auto-detected.
      selector:
        entity:
          domain: light
    timestamp_sensor:
      name: Alarm timestamp sensor
      description: 'Sensor with timestamp of next alarm with device_class: timestamp
        (set to ''none'' for manual alarm time)'
      default: none
      selector:
        entity:
          device_class: timestamp
    manual_time:
      name: Manual alarm time
      description: Time to trigger alarm every day if timestamp sensor is not set.
        Settings at or shortly after midnight will not work as expected!
      default: '7:00:00'
      selector:
        time: {}
    check_entity:
      name: Additional entity to check before sunrise is triggered
      description: If set, checks if entity is 'on' or 'home' before triggering. Use
        e.g. a (workday) sensor, device_tracker or person entity.
      default: none
      selector:
        entity: {}
    sunrise_duration:
      name: Sunrise duration
      description: The sunrise will start the configured number of minutes before
        the timestamp.
      default: 25
      selector:
        number:
          min: 5.0
          max: 60.0
          step: 5.0
          unit_of_measurement: min
          mode: slider
    start_brightness:
      name: Minimum brightness
      description: The brightness to start with. Some lights ignore very low values
        and may turn on with full brightness instead!
      default: 1
      selector:
        number:
          min: 1.0
          max: 255.0
          step: 1.0
          mode: slider
    end_brightness:
      name: Maximum brightness
      description: The brightness will be transitioned from the minimum to the configured
        value.
      default: 254
      selector:
        number:
          min: 5.0
          max: 255.0
          step: 1.0
          mode: slider
    min_mired:
      name: Minimum color temperature
      description: 'The minimum color temperature to use. (0: lowest supported)'
      default: 0
      selector:
        number:
          min: 0.0
          max: 500.0
          step: 5.0
          mode: slider
          unit_of_measurement: mired
    pre_sunrise_actions:
      name: Pre-sunrise actions
      description: Optional actions to run before sunrise starts.
      default: []
      selector:
        action: {}
    post_sunrise_actions:
      name: Post-sunrise actions
      description: Optional actions to run after sunrise ends (around the alarm time).
      default: []
      selector:
        action: {}
  source_url: https://gist.github.com/sbyx/96c43b13b90ae1c35b872313ba1d2d2d
variables:
  light_entity: !input 'light_entity'
  sensor: !input 'timestamp_sensor'
  sunrise_duration: !input 'sunrise_duration'
  start_brightness: !input 'start_brightness'
  end_brightness: !input 'end_brightness'
  range_brightness: '{{float(end_brightness)-float(start_brightness)}}'
  manual_time: !input 'manual_time'
  seconds: '{{float(sunrise_duration) * 60}}'
  min_mired: !input 'min_mired'
  start_mired: '{{state_attr(light_entity, ''max_mireds'')}}'
  end_mired: '{{[state_attr(light_entity, ''min_mireds'')|int(0), min_mired|int(0)]|max}}'
  tick_time: '{{float(seconds) / float(range_brightness)}}'
  check_entity: !input 'check_entity'
trigger:
- platform: time_pattern
  minutes: '*'
condition: []
action:
- wait_template: '{{sensor == ''none'' or as_timestamp(states(sensor), None) != None}}'
- wait_template: '{{0 < as_timestamp(states(sensor) if sensor != ''none'' else states(''sensor.date'')
    ~ '' '' ~ manual_time) - as_timestamp(states(''sensor.date_time_iso'')) <= float(seconds)
    and states(check_entity) in [''unknown'', ''on'', ''home'']}}'
- choose: []
  default: !input 'pre_sunrise_actions'
- condition: template
  value_template: '{{sensor == ''none'' or as_timestamp(states(sensor), None) != None}}'
- condition: template
  value_template: '{{0 < as_timestamp(states(sensor) if sensor != ''none'' else states(''sensor.date'')
    ~ '' '' ~ manual_time) - as_timestamp(now()) <= float(seconds) and states(check_entity)
    in [''unknown'', ''on'', ''home'']}}'
- choose:
  - conditions:
    - '{{state_attr(light_entity, ''min_mireds'') != None}}'
    sequence:
    - service: light.turn_on
      data:
        brightness: '{{start_brightness}}'
        color_temp: '{{start_mired}}'
      entity_id: !input 'light_entity'
  default:
  - service: light.turn_on
    data:
      brightness: '{{start_brightness}}'
    entity_id: !input 'light_entity'
- repeat:
    while:
    - '{{sensor == ''none'' or as_timestamp(states(sensor), None) != None}}'
    - '{{0 < as_timestamp(states(sensor) if sensor != ''none'' else states(''sensor.date'')
      ~ '' '' ~ manual_time) - as_timestamp(now()) <= float(seconds)}}'
    sequence:
    - delay: '{{tick_time}}'
    - choose:
      - conditions:
        - '{{0 < state_attr(light_entity, ''brightness'') | int(0) < end_brightness |
          int}}'
        - '{{sensor == ''none'' or as_timestamp(states(sensor), None) != None}}'
        - '{{0 < as_timestamp(states(sensor) if sensor != ''none'' else states(''sensor.date'')
          ~ '' '' ~ manual_time) - as_timestamp(now()) <= float(seconds)}}'
        sequence:
        - choose:
          - conditions:
            - '{{state_attr(light_entity, ''min_mireds'') != None}}'
            sequence:
            - service: light.turn_on
              data:
                brightness: '{{(float(end_brightness) - (float(range_brightness) *
                  (as_timestamp(states(sensor) if sensor != ''none'' else states(''sensor.date'')
                  ~ '' '' ~ manual_time) - as_timestamp(now())) / float(seconds)))
                  | int(0)}}'
                color_temp: '{{(float(end_mired) + (float(start_mired) - float(end_mired))
                  * ((as_timestamp(states(sensor) if sensor != ''none'' else states(''sensor.date'')
                  ~ '' '' ~ manual_time) - as_timestamp(now())) / float(seconds)))
                  | int(0)}}'
              entity_id: !input 'light_entity'
          default:
          - service: light.turn_on
            data:
              brightness: '{{(float(end_brightness) - (float(range_brightness) * (as_timestamp(states(sensor)
                if sensor != ''none'' else states(''sensor.date'') ~ '' '' ~ manual_time)
                - as_timestamp(now())) / float(seconds))) | int(0)}}'
            entity_id: !input 'light_entity'
- choose: []
  default: !input 'post_sunrise_actions'
mode: single
max_exceeded: silent

I have this a Post-sunrise action, you could do it pre-sunrise.

action: media_player.play_media
target:
entity_id: media_player.nest_hub_schlafzimmer
data:
media_content_id: media-source://radio_browser/d88c0d24-adb2-11e9-88f4-52543be04c81
media_content_type: audio/aac
metadata:
title: Radio Paradise Mellow Mix AAC 320k
thumbnail: https://radioparadise.com/apple-touch-icon.png
media_class: music
children_media_class: null
navigateIds:
- {}
- media_content_type: app
media_content_id: media-source://radio_browser
- media_content_type: music
media_content_id: media-source://radio_browser/tag
- media_content_type: music
media_content_id: media-source://radio_browser/tag/alternative

It appears that this blueprint might not work in Home Assistant 2026.1 and higher:

WARNING (MainThread) [homeassistant.components.light] Got `color_temp` argument in `turn_on` service, which is deprecated and will break in Home Assistant 2026.1, please use `color_temp_kelvin` argument

So I've created a fork https://gist.github.com/DigitallyRefined/e212f3b96042f265b2c662677fb16d13 that switches over to color_temp_kelvin

I have am input datetime helper that gets set via a shortcut on my iPhone and only contains my wakeup time not the date.

I want to use that to dynamically trigger. However I cannot select it as Alarm timestamp sensor.

Anyone as ha solution?

It appears that this blueprint might not work in Home Assistant 2026.1 and higher:

WARNING (MainThread) [homeassistant.components.light] Got `color_temp` argument in `turn_on` service, which is deprecated and will break in Home Assistant 2026.1, please use `color_temp_kelvin` argument

So I've created a fork https://gist.github.com/DigitallyRefined/e212f3b96042f265b2c662677fb16d13 that switches over to color_temp_kelvin

Thanks for that, I was getting concerned about that as well!

I tried using the updated one and I got the following error:

Error: In 'template' condition: ValueError: Template error: as_timestamp got invalid input 'unknown' when rendering template '{{ 0 < as_timestamp( states(sensor) if sensor != 'none' else states('sensor.date') ~ ' ' ~ manual_time ) - as_timestamp(states('sensor.date_time_iso')) <= float(seconds) and states(check_entity) in ['unknown', 'on', 'home'] }}' but no default was specified

This is my first try at a blueprint and I'm a complete newby to home assistant. Any suggestions?

Using Claude I also modifed the script to use kelvin for the color temprature change and made the curve less steep when raising the brightness. The curve is modifiable via the settings. It also checks if the lights are allready turned on and then skips them.

This fork is available at https://gist.github.com/larkov/1c197a04d06c6df6f91137435234d171