mixing_light.ino

// the setup routine runs once when you press reset:
void setup() {
  // initialize serial communication at 9600 bits per second:
  Serial.begin(9600);
}

// the loop routine runs over and over again forever:
void loop() {
  // read the input on analog pin 0:
  int sensorValue = analogRead(A0);
  // Convert the analog reading (which goes from 0 - 1023) to a voltage (0 - 5V):
  
  int red =  analogRead(A0);
  int green =  analogRead(A1);
  int blue =  analogRead(A2);

  // print out the value you read:
  Serial.print(red);
  Serial.print(',');
  Serial.print(green);
  Serial.print(',');
  Serial.println(blue);
  
  analogWrite(11, map(red,0,1000,0,253));
  analogWrite(10, map(green,0,1000,0,253));
  analogWrite(9, map(blue,0,1000,0,253));
  
  delay(10);
}