Custom VVV Variable Provisioning for WordPress sites

custom-provision.sh

# #!/bin/bash
# #
# # provision.sh
# #
# # This file is specified in Vagrantfile and is loaded by Vagrant as the primary
# # provisioning script whenever the commands `vagrant up`, `vagrant provision`,
# # or `vagrant reload` are used. It provides all of the default packages and
# # configurations included with Varying Vagrant Vagrants.

# # By storing the date now, we can calculate the duration of provisioning at the
# # end of this script.
# start_seconds="$(date +%s)"

# # Network Detection
# #
# # Make an HTTP request to google.com to determine if outside access is available
# # to us. If 3 attempts with a timeout of 5 seconds are not successful, then we'll
# # skip a few things further in provisioning rather than create a bunch of errors.
# if [[ "$(wget --tries=3 --timeout=5 --spider http://google.com 2>&1 | grep 'connected')" ]]; then
# 	echo "Network connection detected..."
# 	ping_result="Connected"
# else
# 	echo "Network connection not detected. Unable to reach google.com..."
# 	ping_result="Not Connected"
# fi

# # PACKAGE INSTALLATION
# #
# # Build a bash array to pass all of the packages we want to install to a single
# # apt-get command. This avoids doing all the leg work each time a package is
# # set to install. It also allows us to easily comment out or add single
# # packages. We set the array as empty to begin with so that we can append
# # individual packages to it as required.
# apt_package_install_list=()

# # Start with a bash array containing all packages we want to install in the
# # virtual machine. We'll then loop through each of these and check individual
# # status before adding them to the apt_package_install_list array.
# apt_package_check_list=(

# 	# PHP5
# 	#
# 	# Our base packages for php5. As long as php5-fpm and php5-cli are
# 	# installed, there is no need to install the general php5 package, which
# 	# can sometimes install apache as a requirement.
# 	php5-fpm
# 	php5-cli

# 	# Common and dev packages for php
# 	php5-common
# 	php5-dev

# 	# Extra PHP modules that we find useful
# 	php5-memcache
# 	php5-imagick
# 	php5-mcrypt
# 	php5-mysql
# 	php5-imap
# 	php5-curl
# 	php-pear
# 	php5-gd

# 	# nginx is installed as the default web server
# 	nginx

# 	# memcached is made available for object caching
# 	memcached

# 	# mysql is the default database
# 	mysql-server

# 	# other packages that come in handy
# 	imagemagick
# 	subversion
# 	git-core
# 	zip
# 	unzip
# 	ngrep
# 	curl
# 	make
# 	vim
# 	colordiff
# 	postfix

# 	# ntp service to keep clock current
# 	ntp

# 	# Req'd for i18n tools
# 	gettext

# 	# Req'd for Webgrind
# 	graphviz

# 	# dos2unix
# 	# Allows conversion of DOS style line endings to something we'll have less
# 	# trouble with in Linux.
# 	dos2unix

# 	# nodejs for use by grunt
# 	g++
# 	nodejs

# 	#Mailcatcher requirement
# 	libsqlite3-dev

# )

# echo "Check for apt packages to install..."

# # Loop through each of our packages that should be installed on the system. If
# # not yet installed, it should be added to the array of packages to install.
# for pkg in "${apt_package_check_list[@]}"; do
# 	package_version="$(dpkg -s $pkg 2>&1 | grep 'Version:' | cut -d " " -f 2)"
# 	if [[ -n "${package_version}" ]]; then
# 		space_count="$(expr 20 - "${#pkg}")" #11
# 		pack_space_count="$(expr 30 - "${#package_version}")"
# 		real_space="$(expr ${space_count} + ${pack_space_count} + ${#package_version})"
# 		printf " * $pkg %${real_space}.${#package_version}s ${package_version}\n"
# 	else
# 		echo " *" $pkg [not installed]
# 		apt_package_install_list+=($pkg)
# 	fi
# done

# # MySQL
# #
# # Use debconf-set-selections to specify the default password for the root MySQL
# # account. This runs on every provision, even if MySQL has been installed. If
# # MySQL is already installed, it will not affect anything.
# echo mysql-server mysql-server/root_password password root | debconf-set-selections
# echo mysql-server mysql-server/root_password_again password root | debconf-set-selections

# # Postfix
# #
# # Use debconf-set-selections to specify the selections in the postfix setup. Set
# # up as an 'Internet Site' with the host name 'vvv'. Note that if your current
# # Internet connection does not allow communication over port 25, you will not be
# # able to send mail, even with postfix installed.
# echo postfix postfix/main_mailer_type select Internet Site | debconf-set-selections
# echo postfix postfix/mailname string vvv | debconf-set-selections
# # Disable ipv6 as some ISPs/mail servers have problems with it
# echo "inet_protocols = ipv4" >> /etc/postfix/main.cf

# # Provide our custom apt sources before running `apt-get update`
# ln -sf /srv/config/apt-source-append.list /etc/apt/sources.list.d/vvv-sources.list
# echo "Linked custom apt sources"

# if [[ $ping_result == "Connected" ]]; then
# 	# If there are any packages to be installed in the apt_package_list array,
# 	# then we'll run `apt-get update` and then `apt-get install` to proceed.
# 	if [[ ${#apt_package_install_list[@]} = 0 ]]; then
# 		echo -e "No apt packages to install.\n"
# 	else
# 		# Before running `apt-get update`, we should add the public keys for
# 		# the packages that we are installing from non standard sources via
# 		# our appended apt source.list

# 		# Retrieve the Nginx signing key from nginx.org
# 		echo "Applying Nginx signing key..."
# 		wget --quiet http://nginx.org/keys/nginx_signing.key -O- | apt-key add -

# 		# Apply the nodejs assigning key
# 		echo "Applying nodejs signing key..."
# 		apt-key adv --quiet --keyserver hkp://keyserver.ubuntu.com:80 --recv-key C7917B12 2>&1 | grep "gpg:"
# 		apt-key export C7917B12 | apt-key add -

# 		# update all of the package references before installing anything
# 		echo "Running apt-get update..."
# 		apt-get update --assume-yes

# 		# install required packages
# 		echo "Installing apt-get packages..."
# 		apt-get install --assume-yes ${apt_package_install_list[@]}

# 		# Clean up apt caches
# 		apt-get clean
# 	fi

# 	# npm
# 	#
# 	# Make sure we have the latest npm version and the update checker module
# 	npm install -g npm
# 	npm install -g npm-check-updates

# 	# xdebug
# 	#
# 	# XDebug 2.2.3 is provided with the Ubuntu install by default. The PECL
# 	# installation allows us to use a later version. Not specifying a version
# 	# will load the latest stable.
# 	pecl install xdebug

# 	# ack-grep
# 	#
# 	# Install ack-rep directory from the version hosted at beyondgrep.com as the
# 	# PPAs for Ubuntu Precise are not available yet.
# 	if [[ -f /usr/bin/ack ]]; then
# 		echo "ack-grep already installed"
# 	else
# 		echo "Installing ack-grep as ack"
# 		curl -s http://beyondgrep.com/ack-2.04-single-file > /usr/bin/ack && chmod +x /usr/bin/ack
# 	fi

# 	# COMPOSER
# 	#
# 	# Install Composer if it is not yet available.
# 	if [[ ! -n "$(composer --version --no-ansi | grep 'Composer version')" ]]; then
# 		echo "Installing Composer..."
# 		curl -sS https://getcomposer.org/installer | php
# 		chmod +x composer.phar
# 		mv composer.phar /usr/local/bin/composer
# 	fi

# 	# Update both Composer and any global packages. Updates to Composer are direct from
# 	# the master branch on its GitHub repository.
# 	if [[ -n "$(composer --version --no-ansi | grep 'Composer version')" ]]; then
# 		echo "Updating Composer..."
# 		COMPOSER_HOME=/usr/local/src/composer composer self-update
# 		COMPOSER_HOME=/usr/local/src/composer composer -q global require --no-update phpunit/phpunit:4.3.*
# 		COMPOSER_HOME=/usr/local/src/composer composer -q global require --no-update phpunit/php-invoker:1.1.*
# 		COMPOSER_HOME=/usr/local/src/composer composer -q global require --no-update mockery/mockery:0.9.*
# 		COMPOSER_HOME=/usr/local/src/composer composer -q global require --no-update d11wtq/boris:v1.0.8
# 		COMPOSER_HOME=/usr/local/src/composer composer -q global config bin-dir /usr/local/bin
# 		COMPOSER_HOME=/usr/local/src/composer composer global update
# 	fi

# 	# Grunt
# 	#
# 	# Install or Update Grunt based on current state.  Updates are direct
# 	# from NPM
# 	if [[ "$(grunt --version)" ]]; then
# 		echo "Updating Grunt CLI"
# 		npm update -g grunt-cli &>/dev/null
# 		npm update -g grunt-sass &>/dev/null
# 		npm update -g grunt-cssjanus &>/dev/null
# 		npm update -g grunt-rtlcss &>/dev/null
# 	else
# 		echo "Installing Grunt CLI"
# 		npm install -g grunt-cli &>/dev/null
# 		npm install -g grunt-sass &>/dev/null
# 		npm install -g grunt-cssjanus &>/dev/null
# 		npm install -g grunt-rtlcss &>/dev/null
# 	fi

# 	# Graphviz
# 	#
# 	# Set up a symlink between the Graphviz path defined in the default Webgrind
# 	# config and actual path.
# 	echo "Adding graphviz symlink for Webgrind..."
# 	ln -sf /usr/bin/dot /usr/local/bin/dot

# else
# 	echo -e "\nNo network connection available, skipping package installation"
# fi

# # Configuration for nginx
# if [[ ! -e /etc/nginx/server.key ]]; then
# 	echo "Generate Nginx server private key..."
# 	vvvgenrsa="$(openssl genrsa -out /etc/nginx/server.key 2048 2>&1)"
# 	echo "$vvvgenrsa"
# fi
# if [[ ! -e /etc/nginx/server.csr ]]; then
# 	echo "Generate Certificate Signing Request (CSR)..."
# 	openssl req -new -batch -key /etc/nginx/server.key -out /etc/nginx/server.csr
# fi
# if [[ ! -e /etc/nginx/server.crt ]]; then
# 	echo "Sign the certificate using the above private key and CSR..."
# 	vvvsigncert="$(openssl x509 -req -days 365 -in /etc/nginx/server.csr -signkey /etc/nginx/server.key -out /etc/nginx/server.crt 2>&1)"
# 	echo "$vvvsigncert"
# fi

# echo -e "\nSetup configuration files..."



# Used to to ensure proper services are started on `vagrant up`
cp /srv/config/init/vvv-start.conf /etc/init/vvv-start.conf

echo " * Copied /srv/config/init/vvv-start.conf               to /etc/init/vvv-start.conf"

# Copy nginx configuration from local
cp /srv/config/nginx-config/nginx.conf /etc/nginx/nginx.conf
cp /srv/config/nginx-config/nginx-wp-common.conf /etc/nginx/nginx-wp-common.conf
if [[ ! -d /etc/nginx/custom-sites ]]; then
	mkdir /etc/nginx/custom-sites/
fi
rsync -rvzh --delete /srv/config/nginx-config/sites/ /etc/nginx/custom-sites/

echo " * Copied /srv/config/nginx-config/nginx.conf           to /etc/nginx/nginx.conf"
echo " * Copied /srv/config/nginx-config/nginx-wp-common.conf to /etc/nginx/nginx-wp-common.conf"
echo " * Rsync'd /srv/config/nginx-config/sites/              to /etc/nginx/custom-sites"

# Copy php-fpm configuration from local
cp /srv/config/php5-fpm-config/php5-fpm.conf /etc/php5/fpm/php5-fpm.conf
cp /srv/config/php5-fpm-config/www.conf /etc/php5/fpm/pool.d/www.conf
cp /srv/config/php5-fpm-config/php-custom.ini /etc/php5/fpm/conf.d/php-custom.ini
cp /srv/config/php5-fpm-config/opcache.ini /etc/php5/fpm/conf.d/opcache.ini
cp /srv/config/php5-fpm-config/xdebug.ini /etc/php5/mods-available/xdebug.ini

# Find the path to Xdebug and prepend it to xdebug.ini
XDEBUG_PATH=$( find /usr -name 'xdebug.so' | head -1 )
sed -i "1izend_extension=\"$XDEBUG_PATH\"" /etc/php5/mods-available/xdebug.ini

echo " * Copied /srv/config/php5-fpm-config/php5-fpm.conf     to /etc/php5/fpm/php5-fpm.conf"
echo " * Copied /srv/config/php5-fpm-config/www.conf          to /etc/php5/fpm/pool.d/www.conf"
echo " * Copied /srv/config/php5-fpm-config/php-custom.ini    to /etc/php5/fpm/conf.d/php-custom.ini"
echo " * Copied /srv/config/php5-fpm-config/opcache.ini       to /etc/php5/fpm/conf.d/opcache.ini"
echo " * Copied /srv/config/php5-fpm-config/xdebug.ini        to /etc/php5/mods-available/xdebug.ini"

# Copy memcached configuration from local
cp /srv/config/memcached-config/memcached.conf /etc/memcached.conf

echo " * Copied /srv/config/memcached-config/memcached.conf   to /etc/memcached.conf"

# Copy custom dotfiles and bin file for the vagrant user from local
cp /srv/config/bash_profile /home/vagrant/.bash_profile
cp /srv/config/bash_aliases /home/vagrant/.bash_aliases
cp /srv/config/vimrc /home/vagrant/.vimrc
if [[ ! -d /home/vagrant/.subversion ]]; then
	mkdir /home/vagrant/.subversion
fi
cp /srv/config/subversion-servers /home/vagrant/.subversion/servers
if [[ ! -d /home/vagrant/bin ]]; then
	mkdir /home/vagrant/bin
fi
rsync -rvzh --delete /srv/config/homebin/ /home/vagrant/bin/

echo " * Copied /srv/config/bash_profile                      to /home/vagrant/.bash_profile"
echo " * Copied /srv/config/bash_aliases                      to /home/vagrant/.bash_aliases"
echo " * Copied /srv/config/vimrc                             to /home/vagrant/.vimrc"
echo " * Copied /srv/config/subversion-servers                to /home/vagrant/.subversion/servers"
echo " * rsync'd /srv/config/homebin                          to /home/vagrant/bin"

# If a bash_prompt file exists in the VVV config/ directory, copy to the VM.
if [[ -f /srv/config/bash_prompt ]]; then
	cp /srv/config/bash_prompt /home/vagrant/.bash_prompt
	echo " * Copied /srv/config/bash_prompt                       to /home/vagrant/.bash_prompt"
fi

# Mailcatcher
# 
# Installs mailcatcher using RVM. RVM allows us to install the
# current version of ruby and all mailcatcher dependencies reliably.
# rvm_version="$(/usr/bin/env rvm --silent --version 2>&1 | grep 'rvm ' | cut -d " " -f 2)"
# if [[ -n "${rvm_version}" ]]; then

# 	pkg="RVM"
# 	space_count="$(expr 20 - "${#pkg}")" #11
# 	pack_space_count="$(expr 30 - "${#rvm_version}")"
# 	real_space="$(expr ${space_count} + ${pack_space_count} + ${#rvm_version})"
# 	printf " * $pkg %${real_space}.${#rvm_version}s ${rvm_version}\n"
# else
# 	# RVM key D39DC0E3
# 	# Signatures introduced in 1.26.0
# 	gpg -q --no-tty --batch --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys D39DC0E3
# 	gpg -q --no-tty --batch --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys BF04FF17
	
# 	printf " * RVM [not installed]\n Installing from source"
# 	curl --silent -L https://get.rvm.io | sudo bash -s stable --ruby
# 	source /usr/local/rvm/scripts/rvm
# fi

# mailcatcher_version="$(/usr/bin/env mailcatcher --version 2>&1 | grep 'mailcatcher ' | cut -d " " -f 2)"
# if [[ -n "${mailcatcher_version}" ]]; then
# 	pkg="Mailcatcher"
# 	space_count="$(expr 20 - "${#pkg}")" #11
# 	pack_space_count="$(expr 30 - "${#mailcatcher_version}")"
# 	real_space="$(expr ${space_count} + ${pack_space_count} + ${#mailcatcher_version})"
# 	printf " * $pkg %${real_space}.${#mailcatcher_version}s ${mailcatcher_version}\n"
# else
# 	echo " * Mailcatcher [not installed]"
# 	/usr/bin/env rvm default@mailcatcher --create do gem install mailcatcher --no-rdoc --no-ri


# 	/usr/bin/env rvm default@mailcatcher --create do gem install mailcatcher --no-rdoc --no-ri
# 	/usr/bin/env rvm wrapper default@mailcatcher --no-prefix mailcatcher catchmail
# 	# /usr/bin/env rvm default@mailcatcher do gem install i18n -v 0.6.11
# 	# /usr/bin/env rvm default@mailcatcher do gem uninstall i18n -Ix --version '>0.6.11'
			
# fi


# if [[ -f /etc/init/mailcatcher.conf ]]; then
# 	echo " *" Mailcatcher upstart already configured.
# else
# 	cp /srv/config/init/mailcatcher.conf  /etc/init/mailcatcher.conf
# 	echo " * Copied /srv/config/init/mailcatcher.conf    to /etc/init/mailcatcher.conf"	
# fi

# if [[ -f /etc/php5/mods-available/mailcatcher.ini ]]; then
# 	echo " *" Mailcatcher php5 fpm already configured.
# else
# 	# cp /srv/config/php5-fpm-config/mailcatcher.ini  /etc/php5/fpm/conf.d/mailcatcher.ini
# 	cp /srv/config/php5-fpm-config/mailcatcher.ini /etc/php5/mods-available/mailcatcher.ini
# 	echo " * Copied /srv/config/php5-fpm-config/mailcatcher.ini    to /etc/php5/mods-available/mailcatcher.ini"
# fi


# RESTART SERVICES
#
# Make sure the services we expect to be running are running.
echo -e "\nRestart services..."
service nginx restart
service memcached restart
service mailcatcher restart

# Disable PHP Xdebug module by default
php5dismod xdebug

# Enable PHP mcrypt module by default
php5enmod mcrypt

# Enable PHP mailcatcher sendmail settings by default
php5enmod mailcatcher

service php5-fpm restart

# If MySQL is installed, go through the various imports and service tasks.
exists_mysql="$(service mysql status)"
if [[ "mysql: unrecognized service" != "${exists_mysql}" ]]; then
	echo -e "\nSetup MySQL configuration file links..."

	# Copy mysql configuration from local
	cp /srv/config/mysql-config/my.cnf /etc/mysql/my.cnf
	cp /srv/config/mysql-config/root-my.cnf /home/vagrant/.my.cnf

	echo " * Copied /srv/config/mysql-config/my.cnf               to /etc/mysql/my.cnf"
	echo " * Copied /srv/config/mysql-config/root-my.cnf          to /home/vagrant/.my.cnf"

	# MySQL gives us an error if we restart a non running service, which
	# happens after a `vagrant halt`. Check to see if it's running before
	# deciding whether to start or restart.
	if [[ "mysql stop/waiting" == "${exists_mysql}" ]]; then
		echo "service mysql start"
		service mysql start
	else
		echo "service mysql restart"
		service mysql restart
	fi

	# IMPORT SQL
	#
	# Create the databases (unique to system) that will be imported with
	# the mysqldump files located in database/backups/
	if [[ -f /srv/database/init-custom.sql ]]; then
		mysql -u root -proot < /srv/database/init-custom.sql
		echo -e "\nInitial custom MySQL scripting..."
	else
		echo -e "\nNo custom MySQL scripting found in database/init-custom.sql, skipping..."
	fi

	# Setup MySQL by importing an init file that creates necessary
	# users and databases that our vagrant setup relies on.
	mysql -u root -proot < /srv/database/init.sql
	echo "Initial MySQL prep..."

	# Process each mysqldump SQL file in database/backups to import
	# an initial data set for MySQL.
	/srv/database/import-sql.sh
else
	echo -e "\nMySQL is not installed. No databases imported."
fi

# Run wp-cli, tar, and npm as `vagrant` user instead of `root`
if (( $EUID == 0 )); then
    wp() { sudo -EH -u vagrant -- wp "$@"; }
    tar() { sudo -EH -u vagrant -- tar "$@"; }
    npm() { sudo -EH -u vagrant -- npm "$@"; }
fi

if [[ $ping_result == "Connected" ]]; then
	# # WP-CLI Install
	# if [[ ! -d /srv/www/wp-cli ]]; then
	# 	echo -e "\nDownloading wp-cli, see http://wp-cli.org"
	# 	git clone https://github.com/wp-cli/wp-cli.git /srv/www/wp-cli
	# 	cd /srv/www/wp-cli
	# 	composer install
	# else
	# 	echo -e "\nUpdating wp-cli..."
	# 	cd /srv/www/wp-cli
	# 	git pull --rebase origin master
	# 	composer update
	# fi
	# # Link `wp` to the `/usr/local/bin` directory
	# ln -sf /srv/www/wp-cli/bin/wp /usr/local/bin/wp

	# # Download and extract phpMemcachedAdmin to provide a dashboard view and
	# # admin interface to the goings on of memcached when running
	# if [[ ! -d /srv/www/default/memcached-admin ]]; then
	# 	echo -e "\nDownloading phpMemcachedAdmin, see https://code.google.com/p/phpmemcacheadmin/"
	# 	cd /srv/www/default
	# 	wget -q -O phpmemcachedadmin.tar.gz 'https://phpmemcacheadmin.googlecode.com/files/phpMemcachedAdmin-1.2.2-r262.tar.gz'
	# 	mkdir memcached-admin
	# 	tar -xf phpmemcachedadmin.tar.gz --directory memcached-admin
	# 	rm phpmemcachedadmin.tar.gz
	# else
	# 	echo "phpMemcachedAdmin already installed."
	# fi

	# # Checkout Opcache Status to provide a dashboard for viewing statistics
	# # about PHP's built in opcache.
	# if [[ ! -d /srv/www/default/opcache-status ]]; then
	# 	echo -e "\nDownloading Opcache Status, see https://github.com/rlerdorf/opcache-status/"
	# 	cd /srv/www/default
	# 	git clone https://github.com/rlerdorf/opcache-status.git opcache-status
	# else
	# 	echo -e "\nUpdating Opcache Status"
	# 	cd /srv/www/default/opcache-status
	# 	git pull --rebase origin master
	# fi

	# # Webgrind install (for viewing callgrind/cachegrind files produced by
	# # xdebug profiler)
	# if [[ ! -d /srv/www/default/webgrind ]]; then
	# 	echo -e "\nDownloading webgrind, see https://github.com/jokkedk/webgrind"
	# 	git clone https://github.com/jokkedk/webgrind.git /srv/www/default/webgrind
	# else
	# 	echo -e "\nUpdating webgrind..."
	# 	cd /srv/www/default/webgrind
	# 	git pull --rebase origin master
	# fi

	# # PHP_CodeSniffer (for running WordPress-Coding-Standards)
	# if [[ ! -d /srv/www/phpcs ]]; then
	# 	echo -e "\nDownloading PHP_CodeSniffer (phpcs), see https://github.com/squizlabs/PHP_CodeSniffer"
	# 	git clone -b master https://github.com/squizlabs/PHP_CodeSniffer.git /srv/www/phpcs
	# else
	# 	cd /srv/www/phpcs
	# 	if [[ $(git rev-parse --abbrev-ref HEAD) == 'master' ]]; then
	# 		echo -e "\nUpdating PHP_CodeSniffer (phpcs)..."
	# 		git pull --no-edit origin master
	# 	else
	# 		echo -e "\nSkipped updating PHP_CodeSniffer since not on master branch"
	# 	fi
	# fi

	# # Sniffs WordPress Coding Standards
	# if [[ ! -d /srv/www/phpcs/CodeSniffer/Standards/WordPress ]]; then
	# 	echo -e "\nDownloading WordPress-Coding-Standards, sniffs for PHP_CodeSniffer, see https://github.com/WordPress-Coding-Standards/WordPress-Coding-Standards"
	# 	git clone -b master https://github.com/WordPress-Coding-Standards/WordPress-Coding-Standards.git /srv/www/phpcs/CodeSniffer/Standards/WordPress
	# else
	# 	cd /srv/www/phpcs/CodeSniffer/Standards/WordPress
	# 	if [[ $(git rev-parse --abbrev-ref HEAD) == 'master' ]]; then
	# 		echo -e "\nUpdating PHP_CodeSniffer WordPress Coding Standards..."
	# 		git pull --no-edit origin master
	# 	else
	# 		echo -e "\nSkipped updating PHPCS WordPress Coding Standards since not on master branch"
	# 	fi
	# fi
	# Install the standards in PHPCS
	/srv/www/phpcs/scripts/phpcs --config-set installed_paths ./CodeSniffer/Standards/WordPress/
	/srv/www/phpcs/scripts/phpcs --config-set default_standard WordPress-Core
	/srv/www/phpcs/scripts/phpcs -i

	# Install and configure the latest stable version of WordPress
	if [[ ! -d /srv/www/wordpress-default ]]; then
		echo "Downloading WordPress Stable, see http://wordpress.org/"
		cd /srv/www/
		curl -L -O https://wordpress.org/latest.tar.gz
		tar -xvf latest.tar.gz
		mv wordpress wordpress-default
		rm latest.tar.gz
		cd /srv/www/wordpress-default
		echo "Configuring WordPress Stable..."
		wp core config --dbname=wordpress_default --dbuser=wp --dbpass=wp --quiet --extra-php <<PHP
// Match any requests made via xip.io.
if ( isset( \$_SERVER['HTTP_HOST'] ) && preg_match('/^(local.wordpress.)\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}(.xip.io)\z/', \$_SERVER['HTTP_HOST'] ) ) {
	define( 'WP_HOME', 'http://' . \$_SERVER['HTTP_HOST'] );
	define( 'WP_SITEURL', 'http://' . \$_SERVER['HTTP_HOST'] );
}

define( 'WP_DEBUG', true );
PHP
		echo "Installing WordPress Stable..."
		wp core install --url=local.wordpress.dev --quiet --title="Local WordPress Dev" --admin_name=admin --admin_email="[email protected]" --admin_password="password"
	else
		echo "Updating WordPress Stable..."
		cd /srv/www/wordpress-default
		wp core upgrade
	fi

	# Test to see if an svn upgrade is needed
	# svn_test=$( svn status -u /srv/www/wordpress-develop/ 2>&1 );
	# if [[ $svn_test == *"svn upgrade"* ]]; then
	# 	# If the wordpress-develop svn repo needed an upgrade, they probably all need it
	# 	for repo in $(find /srv/www -maxdepth 5 -type d -name '.svn'); do
	# 		svn upgrade "${repo/%\.svn/}"
	# 	done
	# fi;

	# Checkout, install and configure WordPress trunk via core.svn
# 	if [[ ! -d /srv/www/wordpress-trunk ]]; then
# 		echo "Checking out WordPress trunk from core.svn, see https://core.svn.wordpress.org/trunk"
# 		svn checkout https://core.svn.wordpress.org/trunk/ /srv/www/wordpress-trunk
# 		cd /srv/www/wordpress-trunk
# 		echo "Configuring WordPress trunk..."
# 		wp core config --dbname=wordpress_trunk --dbuser=wp --dbpass=wp --quiet --extra-php <<PHP
# // Match any requests made via xip.io.
# if ( isset( \$_SERVER['HTTP_HOST'] ) && preg_match('/^(local.wordpress-trunk.)\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}(.xip.io)\z/', \$_SERVER['HTTP_HOST'] ) ) {
# 	define( 'WP_HOME', 'http://' . \$_SERVER['HTTP_HOST'] );
# 	define( 'WP_SITEURL', 'http://' . \$_SERVER['HTTP_HOST'] );
# }

# define( 'WP_DEBUG', true );
# PHP
# 		echo "Installing WordPress trunk..."
# 		wp core install --url=local.wordpress-trunk.dev --quiet --title="Local WordPress Trunk Dev" --admin_name=admin --admin_email="[email protected]" --admin_password="password"
# 	else
# 		echo "Updating WordPress trunk..."
# 		cd /srv/www/wordpress-trunk
# 		svn up
# 	fi

# 	# Checkout, install and configure WordPress trunk via develop.svn
# 	if [[ ! -d /srv/www/wordpress-develop ]]; then
# 		echo "Checking out WordPress trunk from develop.svn, see https://develop.svn.wordpress.org/trunk"
# 		svn checkout https://develop.svn.wordpress.org/trunk/ /srv/www/wordpress-develop
# 		cd /srv/www/wordpress-develop/src/
# 		echo "Configuring WordPress develop..."
# 		wp core config --dbname=wordpress_develop --dbuser=wp --dbpass=wp --quiet --extra-php <<PHP
# // Match any requests made via xip.io.
# if ( isset( \$_SERVER['HTTP_HOST'] ) && preg_match('/^(src|build)(.wordpress-develop.)\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}(.xip.io)\z/', \$_SERVER['HTTP_HOST'] ) ) {
# 	define( 'WP_HOME', 'http://' . \$_SERVER['HTTP_HOST'] );
# 	define( 'WP_SITEURL', 'http://' . \$_SERVER['HTTP_HOST'] );
# } else if ( 'build' === basename( dirname( __FILE__ ) ) ) {
# 	// Allow (src|build).wordpress-develop.dev to share the same Database
# 	define( 'WP_HOME', 'http://build.wordpress-develop.dev' );
# 	define( 'WP_SITEURL', 'http://build.wordpress-develop.dev' );
# }

# define( 'WP_DEBUG', true );
# PHP
# 		echo "Installing WordPress develop..."
# 		wp core install --url=src.wordpress-develop.dev --quiet --title="WordPress Develop" --admin_name=admin --admin_email="[email protected]" --admin_password="password"
# 		cp /srv/config/wordpress-config/wp-tests-config.php /srv/www/wordpress-develop/
# 		cd /srv/www/wordpress-develop/
# 		echo "Running npm install for the first time, this may take several minutes..."
# 		npm install &>/dev/null
# 	else
# 		echo "Updating WordPress develop..."
# 		cd /srv/www/wordpress-develop/
# 		if [[ -e .svn ]]; then
# 			svn up
# 		else
# 			if [[ $(git rev-parse --abbrev-ref HEAD) == 'master' ]]; then
# 				git pull --no-edit git://develop.git.wordpress.org/ master
# 			else
# 				echo "Skip auto git pull on develop.git.wordpress.org since not on master branch"
# 			fi
# 		fi
# 		echo "Updating npm packages..."
# 		npm install &>/dev/null
# 	fi

# 	if [[ ! -d /srv/www/wordpress-develop/build ]]; then
# 		echo "Initializing grunt in WordPress develop... This may take a few moments."
# 		cd /srv/www/wordpress-develop/
# 		grunt
# 	fi
# # Download phpMyAdmin
# 	if [[ ! -d /srv/www/default/database-admin ]]; then
# 		echo "Downloading phpMyAdmin 4.2.13.1..."
# 		cd /srv/www/default
# 		wget -q -O phpmyadmin.tar.gz 'http://sourceforge.net/projects/phpmyadmin/files/phpMyAdmin/4.2.13.1/phpMyAdmin-4.2.13.1-all-languages.tar.gz/download'
# 		tar -xf phpmyadmin.tar.gz
# 		mv phpMyAdmin-4.2.13.1-all-languages database-admin
# 		rm phpmyadmin.tar.gz
# 	else
# 		echo "PHPMyAdmin already installed."
# 	fi
# 	cp /srv/config/phpmyadmin-config/config.inc.php /srv/www/default/database-admin/

else
	echo -e "\nNo network available, skipping network installations"
fi

# Find new sites to setup.
# Kill previously symlinked Nginx configs
# We can't know what sites have been removed, so we have to remove all
# the configs and add them back in again.
find /etc/nginx/custom-sites -name 'vvv-auto-*.conf' -exec rm {} \;

# Look for site setup scripts
for SITE_CONFIG_FILE in $(find /srv/www -maxdepth 5 -name 'vvv-init.sh'); do
	DIR="$(dirname $SITE_CONFIG_FILE)"
	(
		cd "$DIR"
		source vvv-init.sh
	)
done

# Look for Nginx vhost files, symlink them into the custom sites dir
for SITE_CONFIG_FILE in $(find /srv/www -maxdepth 5 -name 'vvv-nginx.conf'); do
	DEST_CONFIG_FILE=${SITE_CONFIG_FILE//\/srv\/www\//}
	DEST_CONFIG_FILE=${DEST_CONFIG_FILE//\//\-}
	DEST_CONFIG_FILE=${DEST_CONFIG_FILE/%-vvv-nginx.conf/}
	DEST_CONFIG_FILE="vvv-auto-$DEST_CONFIG_FILE-$(md5sum <<< "$SITE_CONFIG_FILE" | cut -c1-32).conf"
	# We allow the replacement of the {vvv_path_to_folder} token with
	# whatever you want, allowing flexible placement of the site folder
	# while still having an Nginx config which works.
	DIR="$(dirname $SITE_CONFIG_FILE)"
	sed "s#{vvv_path_to_folder}#$DIR#" "$SITE_CONFIG_FILE" > /etc/nginx/custom-sites/"$DEST_CONFIG_FILE"
done

# Parse any vvv-hosts file located in www/ or subdirectories of www/
# for domains to be added to the virtual machine's host file so that it is
# self aware.
#
# Domains should be entered on new lines.
echo "Cleaning the virtual machine's /etc/hosts file..."
sed -n '/# vvv-auto$/!p' /etc/hosts > /tmp/hosts
mv /tmp/hosts /etc/hosts
echo "Adding domains to the virtual machine's /etc/hosts file..."
find /srv/www/ -maxdepth 5 -name 'vvv-hosts' | \
while read hostfile; do
	while IFS='' read -r line || [ -n "$line" ]; do
		if [[ "#" != ${line:0:1} ]]; then
			if [[ -z "$(grep -q "^127.0.0.1 $line$" /etc/hosts)" ]]; then
				echo "127.0.0.1 $line # vvv-auto" >> /etc/hosts
				echo " * Added $line from $hostfile"
			fi
		fi
	done < "$hostfile"
done

end_seconds="$(date +%s)"
echo "-----------------------------"
echo "Provisioning complete in "$(expr $end_seconds - $start_seconds)" seconds"
if [[ $ping_result == "Connected" ]]; then
	echo "External network connection established, packages up to date."
else
	echo "No external network available. Package installation and maintenance skipped."
fi
echo "For further setup instructions, visit http://vvv.dev"