This assumes you have installed a docker swarm
When one has a docker swarm a container running on any node in the swarm can be accesed using any IP address of any swarm memeber.
For example if you had a single web server running on port 80, on one node of a swarm you could access the web server with any of the following IP addresses:
- server1-ip:80
- server2-ip:80
- serverN-ip:80
Because you want to get to the app even if one swarm node is down typically folks use roud robin DNS to try each of the IP in sequence, this has the disadvantage of failed requests if the node fails. This gist show how i chose to implement a sigle IP and DNS name to improve reachability and consistency
- Added dockerd health check - keepalived will now move the vip to another node if the dockerd is stopped on a node
- Added swarm node health check - checks for node in Active, if not VIP won't start on node
- Made all weights equal - no idea why i had them unequal one wants the VIP to roam!
- Removed the SMTP stuff, just not needed unless you really really want notifications
run the following on each docker node
sudo apt-get install keepalived
add user sudo useradd -r -s /sbin/nologin -M keepalived_script note this is not used yet (i need to figure out how to let it run docker)
execute sudo nano /usr/local/bin/node_active_check.sh
add the following contents
#!/bin/bash
docker node ls -f name=$(hostname) | grep Active > /dev/null 2>&1
save
then sudo chmod 755 /usr/local/bin/node_active_check.sh
execute sudo nano /usr/local/bin/node_ready_check.sh
add the following contents
#!/bin/bash
docker node ls -f name=$(hostname) | grep Ready > /dev/null 2>&1
save
then sudo chmod 755 /usr/local/bin/node_ready_check.sh
sudo nano /etc/keepalived/keepalived.conf
paste in the following
! Configuration File for keepalived
global_defs {
vrrp_startup_delay 5
enable_script_security
max_auto_priority
script_user root
}
vrrp_track_process track_docker {
process dockerd
weight 10
}
vrrp_script node_active_check {
script "/usr/local/bin/node_active_check.sh"
interval 2
timeout 5
rise 3
fall 3
}
vrrp_script node_ready_check {
script "/usr/local/bin/node_ready_check.sh"
interval 2
timeout 5
rise 3
fall 3
}
vrrp_instance docker_swarm {
state MASTER
interface eth0
virtual_router_id 10
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.1.45/24
}
track_process {
track_docker
}
track_script {
node_active_check
}
track_script {
node_ready_check
}
}
Note you may want to:
- change the PASS to your prefered password
- change the IP to the IP you want
- change eth0 if your adapater has a different name
Once you have created the file save and exit
Then start the service
sudo systemctl start keepalived
sudo systemctl enable keepalived
for example
swarm.mydomain.com A 192.168.1.45
use this name when you want to address any container in the swarm
if you want a simple test ping the vip (e.g. 192.168.1.45) and see what happens when you shutdown each of the nodes!
@scyto i assumed the mistake was by design, thank you for fixing the Gist.