Nielk1

/*
 * MIT License
 * 
 * Copyright (c) 2021-2022 John "Nielk1" Klein
 * 
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is

stealth-alex

Copy of deleted topic: https://www.reddit.com/r/gamedev/comments/jumvi5/dualsense_haptics_leds_and_more_hid_output_report/

---

outputReport[0]  = 0x02; // report type

outputReport[1]  = 0xff; // flags determiing what changes this packet will perform
    // 0x01 set the main motors (also requires flag 0x02); setting this by itself will allow rumble to gracefully terminate and then re-enable audio haptics, whereas not setting it will kill the rumble instantly and re-enable audio haptics.
    // 0x02 set the main motors (also requires flag 0x01; without bit 0x01 motors are allowed to time out without re-enabling audio haptics)
    // 0x04 set the right trigger motor

nealfennimore

# ------------------------------------------------
# Config files are located in /etc/wireguard/wg0
# ------------------------------------------------

# ---------- Server Config ----------
[Interface]
Address = 10.10.0.1/24 # IPV4 CIDR 
Address = fd86:ea04:1111::1/64 # IPV6 CIDR 
PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE; ip6tables -A FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Add forwarding when VPN is started
PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE; ip6tables -D FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -D POSTROUTING -o eth0 -j MASQUERADE # Remove forwarding when VPN is shutdown