rabbitmq.conf

# [
#  {rabbit,
#   [##
   ## Network Connectivity
   ## ====================
   ##
   ## By default, RabbitMQ will listen on all interfaces, using
   ## the standard (reserved) AMQP port.
   ##
   ## {tcp_listeners, [5672]},
   ## To listen on a specific interface, provide a tuple of {IpAddress, Port}.
   ## For example, to listen only on localhost for both IPv4 and IPv6:
   ##
   ## {tcp_listeners, [{"127.0.0.1", 5672},
   ##                  {"::1",       5672}]},
# Define with port
listener.tcp.default = 5672

# Define with IP
# listener.tcp.local = 127.0.0.1:5672

# Define for IPv6
# listener.tcp.local_v6 = ::1:5672


   ## SSL listeners are configured in the same fashion as TCP listeners,
   ## including the option to control the choice of interface.
   ##
   ## {ssl_listeners, [5671]},

# SSL listeners are same
listener.ssl.default = 5672


   ## Number of Erlang processes that will accept connections for the TCP
   ## and SSL listeners.
   ##
   ## {num_tcp_acceptors, 10},
   ## {num_ssl_acceptors, 1},

num_acceptors.tcp = 10
num_acceptors.ssl = 1


   ## Maximum time for AMQP 0-8/0-9/0-9-1 handshake (after socket connection
   ## and SSL handshake), in milliseconds.
   ##
   ## {handshake_timeout, 10000},

handshake_timeout = 10000

   ## Set to 'true' to perform reverse DNS lookups when accepting a
   ## connection. Hostnames will then be shown instead of IP addresses
   ## in rabbitmqctl and the management plugin.
   ##
   ## {reverse_dns_lookups, true},
reverse_dns_lookups = true

   # ##
   # ## Security / AAA
   # ## ==============
   # ##

   # ## The default "guest" user is only permitted to access the server
   # ## via a loopback interface (e.g. localhost).
   # ## {loopback_users, [<<"guest">>]},
   # ##
   # ## Uncomment the following line if you want to allow access to the
   # ## guest user from anywhere on the network.
   # ## {loopback_users, []},

# Duplicate 'guest', because cutterfish doesn't support collections

loopback_user.guest = guest

   ## Configuring SSL.
   ## See http://www.rabbitmq.com/ssl.html for full documentation.
   ##
   ## {ssl_options, [{cacertfile,           "/path/to/testca/cacert.pem"},
   ##                {certfile,             "/path/to/server/cert.pem"},
   ##                {keyfile,              "/path/to/server/key.pem"},
   ##                {verify,               verify_peer},
   ##                {fail_if_no_peer_cert, false}]},

ssl_option.verify               = verify_peer
ssl_option.fail_if_no_peer_cert = false
ssl_option.cacertfile           = /path/to/testca/cacert.pem
ssl_option.certfile             = /path/to/server/cert.pem
ssl_option.keyfile              = /path/to/server/key.pem

   ## Choose the available SASL mechanism(s) to expose.
   ## The two default (built in) mechanisms are 'PLAIN' and
   ## 'AMQPLAIN'. Additional mechanisms can be added via
   ## plugins.
   ##
   ## See http://www.rabbitmq.com/authentication.html for more details.
   ##
   ## {auth_mechanisms, ['PLAIN', 'AMQPLAIN']},

   ## Select an authentication database to use. RabbitMQ comes bundled
   ## with a built-in auth-database, based on mnesia.
   ##
   ## {auth_backends, [rabbit_auth_backend_internal]},

   ## Configurations supporting the rabbitmq_auth_mechanism_ssl and
   ## rabbitmq_auth_backend_ldap plugins.
   ##
   ## NB: These options require that the relevant plugin is enabled.
   ## See http://www.rabbitmq.com/plugins.html for further details.

   ## The RabbitMQ-auth-mechanism-ssl plugin makes it possible to
   ## authenticate a user based on the client's SSL certificate.
   ##
   ## To use auth-mechanism-ssl, add to or replace the auth_mechanisms
   ## list with the entry 'EXTERNAL'.
   ##
   ## {auth_mechanisms, ['EXTERNAL']},

   ## The rabbitmq_auth_backend_ldap plugin allows the broker to
   ## perform authentication and authorisation by deferring to an
   ## external LDAP server.
   ##
   ## For more information about configuring the LDAP backend, see
   ## http://www.rabbitmq.com/ldap.html.
   ##
   ## Enable the LDAP auth backend by adding to or replacing the
   ## auth_backends entry:
   ##
   ## {auth_backends, [rabbit_auth_backend_ldap]},

auth_mechanism.external = EXTERNAL
auth_backend.internal   = rabbit_auth_backend_internal

# Add another backend
# auth_backend.http = rabbit_auth_backend_http


   ## This pertains to both the rabbitmq_auth_mechanism_ssl plugin and
   ## STOMP ssl_cert_login configurations. See the rabbitmq_stomp
   ## configuration section later in this file and the README in
   ## https://github.com/rabbitmq/rabbitmq-auth-mechanism-ssl for further
   ## details.
   ##
   ## To use the SSL cert's CN instead of its DN as the username
   ##
   ## {ssl_cert_login_from, common_name},

   ## SSL handshake timeout, in milliseconds.
   ##
   ## {ssl_handshake_timeout, 5000},

ssl_cert_login_from   = common_name
ssl_handshake_timeout = 5000


   ## Password hashing implementation. Will only affect newly
   ## created users. To recalculate hash for an existing user
   ## it's necessary to update her password.
   ##
   ## When importing definitions exported from versions earlier
   ## than 3.6.0, it is possible to go back to MD5 (only do this
   ## as a temporary measure!) by setting this to rabbit_password_hashing_md5.
   ##
   ## To use SHA-512, set to rabbit_password_hashing_sha512.
   ##
   ## {password_hashing_module, rabbit_password_hashing_sha256},

password_hashing_module = rabbit_password_hashing_sha256

   ##
   ## Default User / VHost
   ## ====================
   ##

   ## On first start RabbitMQ will create a vhost and a user. These
   ## config items control what gets created. See
   ## http://www.rabbitmq.com/access-control.html for further
   ## information about vhosts and access control.
   ##
   ## {default_vhost,       <<"/">>},
   ## {default_user,        <<"guest">>},
   ## {default_pass,        <<"guest">>},
   ## {default_permissions, [<<".*">>, <<".*">>, <<".*">>]},

default_vhost = /
default_user = guest
default_pass = guest

default_permissions.configure = .*
default_permissions.read = .*
default_permissions.write = .*

   ## Tags for default user
   ##
   ## For more details about tags, see the documentation for the
   ## Management Plugin at http://www.rabbitmq.com/management.html.
   ##
   ## {default_user_tags, [administrator]},

default_user_tags.administrator = true

   ##
   ## Additional network and protocol related configuration
   ## =====================================================
   ##

   ## Set the default AMQP heartbeat delay (in seconds).
   ##
   ## {heartbeat, 600},

   ## Set the max permissible size of an AMQP frame (in bytes).
   ##
   ## {frame_max, 131072},

   ## Set the max frame size the server will accept before connection
   ## tuning occurs
   ##
   ## {initial_frame_max, 4096},

   ## Set the max permissible number of channels per connection.
   ## 0 means "no limit".
   ##
   ## {channel_max, 128},

heartbeat         = 600
frame_max         = 131072
initial_frame_max = 4096
channel_max       = 128

   ## Customising Socket Options.
   ##
   ## See (http://www.erlang.org/doc/man/inet.html#setopts-2) for
   ## further documentation.
   ##
   ## {tcp_listen_options, [{backlog,       128},
   ##                       {nodelay,       true},
   ##                       {exit_on_close, false}]},

tcp_listen_option.backlog = 128
tcp_listen_option.nodelay = true
tcp_listen_option.exit_on_close = false

   ##
   ## Resource Limits & Flow Control
   ## ==============================
   ##
   ## See http://www.rabbitmq.com/memory.html for full details.

   ## Memory-based Flow Control threshold.
   ##
   ## {vm_memory_high_watermark, 0.4},

   ## Alternatively, we can set a limit (in bytes) of RAM used by the node.
   ##
   ## {vm_memory_high_watermark, {absolute, 1073741824}},
   ##
   ## Or you can set absolute value using memory units (with RabbitMQ 3.6.0+).
   ##
   ## {vm_memory_high_watermark, {absolute, "1024M"}},
   ##
   ## Supported units suffixes:
   ##
   ## k, kiB: kibibytes (2^10 bytes)
   ## M, MiB: mebibytes (2^20)
   ## G, GiB: gibibytes (2^30)
   ## kB: kilobytes (10^3)
   ## MB: megabytes (10^6)
   ## GB: gigabytes (10^9)

# Relative watermark
vm_memory_high_watermark.relative = 0.4

# Or absolute watermark.
# Ignored if relative is defined!
# vm_memory_high_watermark.absolute = 1024M

   ## Fraction of the high watermark limit at which queues start to
   ## page message out to disc in order to free up memory.
   ##
   ## Values greater than 0.9 can be dangerous and should be used carefully.
   ##
   ## {vm_memory_high_watermark_paging_ratio, 0.5},

vm_memory_high_watermark_paging_ratio = 0.5

   ## Interval (in milliseconds) at which we perform the check of the memory
   ## levels against the watermarks.
   ##
   ## {memory_monitor_interval, 2500},

memory_monitor_interval = 2500

   ## Set disk free limit (in bytes). Once free disk space reaches this
   ## lower bound, a disk alarm will be set - see the documentation
   ## listed above for more details.
   ##
   ## {disk_free_limit, 50000000},
   ##
   ## Or you can set it using memory units (same as in vm_memory_high_watermark)
   ## with RabbitMQ 3.6.0+.
   ## {disk_free_limit, "50MB"},
   ## {disk_free_limit, "50000kB"},
   ## {disk_free_limit, "2GB"},

   ## Alternatively, we can set a limit relative to total available RAM.
   ##
   ## Values lower than 1.0 can be dangerous and should be used carefully.
   ## {disk_free_limit, {mem_relative, 2.0}},

# Mem relative disk limit
disk_free_limit.relative = 2.0

# Absolute disk limit
# Ignored if relative defined
disk_free_limit.absolute = 50MB


   ##
   ## Clustering
   ## =====================
   ##

   ## How to respond to cluster partitions.
   ## See http://www.rabbitmq.com/partitions.html for further details.
   ##
   ## {cluster_partition_handling, ignore},

cluster_partition_handling = ignore

   ## Mirror sync batch size, in messages. Increasing this will speed
   ## up syncing but total batch size in bytes must not exceed 2 GiB.
   ## Available in RabbitMQ 3.6.0 or later.
   ##
   ## {mirroring_sync_batch_size, 4096},

mirroring_sync_batch_size = 4096

   ## Make clustering happen *automatically* at startup - only applied
   ## to nodes that have just been reset or started for the first time.
   ## See http://www.rabbitmq.com/clustering.html#auto-config for
   ## further details.
   ##
   ## {cluster_nodes, {['[email protected]'], disc}},

cluster_nodes.disk.rabbit = [email protected]

# Can define multiple
# cluster_nodes.disk.hare = [email protected]

# Ram nodes
# Should not be defined together with disk nodes
# cluster_nodes.ram.rabbit = [email protected]

   ## Interval (in milliseconds) at which we send keepalive messages
   ## to other cluster members. Note that this is not the same thing
   ## as net_ticktime; missed keepalive messages will not cause nodes
   ## to be considered down.
   ##
   ## {cluster_keepalive_interval, 10000},

cluster_keepalive_interval = 10000

   ##
   ## Statistics Collection
   ## =====================
   ##

   ## Set (internal) statistics collection granularity.
   ##
   ## {collect_statistics, none},

# Cna be none, coarse or fine
collect_statistics = none

   ## Statistics collection interval (in milliseconds). Increasing
   ## this will reduce the load on management database.
   ##
   ## {collect_statistics_interval, 5000},

collect_statistics_interval = 5000

   ##
   ## Misc/Advanced Options
   ## =====================
   ##
   ## NB: Change these only if you understand what you are doing!
   ##

   ## Explicitly enable/disable hipe compilation.
   ##
   ## {hipe_compile, true},

hipe_compile = true

   ## Timeout used when waiting for Mnesia tables in a cluster to
   ## become available.
   ##
   ## {mnesia_table_loading_timeout, 30000},

mnesia_table_loading_timeout = 30000


   ## Size in bytes below which to embed messages in the queue index. See
   ## http://www.rabbitmq.com/persistence-conf.html
   ##
   ## {queue_index_embed_msgs_below, 4096}

queue_index_embed_msgs_below = 4096

 #  ]},

 # ## ----------------------------------------------------------------------------
 # ## Advanced Erlang Networking/Clustering Options.
 # ##
 # ## See http://www.rabbitmq.com/clustering.html for details
 # ## ----------------------------------------------------------------------------
 # {kernel,
 #  [## Sets the net_kernel tick time.
 #   ## Please see http://erlang.org/doc/man/kernel_app.html and
 #   ## http://www.rabbitmq.com/nettick.html for further details.
 #   ##
 #   ## {net_ticktime, 60}
 #  ]},

# ======================================
# Kernel section
# ======================================

net_ticktime = 60

 # ## ----------------------------------------------------------------------------
 # ## RabbitMQ Management Plugin
 # ##
 # ## See http://www.rabbitmq.com/management.html for details
 # ## ----------------------------------------------------------------------------

 # {rabbitmq_management,
  # [## Pre-Load schema definitions from the following JSON file. See
   ## http://www.rabbitmq.com/management.html#load-definitions
   ##
   ## {load_definitions, "/path/to/schema.json"},

# =======================================
# Management section
# =======================================

management.load_definitions = /path/to/schema.json

   ## Log all requests to the management HTTP API to a file.
   ##
   ## {http_log_dir, "/path/to/access.log"},

management.http_log_dir = /path/to/access.log

   ## Change the port on which the HTTP listener listens,
   ## specifying an interface for the web server to bind to.
   ## Also set the listener to use SSL and provide SSL options.
   ##
   ## {listener, [{port,     12345},
   ##             {ip,       "127.0.0.1"},
   ##             {ssl,      true},
   ##             {ssl_opts, [{cacertfile, "/path/to/cacert.pem"},
   ##                         {certfile,   "/path/to/cert.pem"},
   ##                         {keyfile,    "/path/to/key.pem"}]}]},


# Maybe use IP type like in tcp_listener?
management.listener.port = 12345
management.listener.ip   = 127.0.0.1
management.listener.ssl  = true

management.listener.ssl_opts.cacertfile = /path/to/cacert.pem
management.listener.ssl_opts.certfile   = /path/to/cert.pem
management.listener.ssl_opts.keyfile    = /path/to/key.pem

   ## One of 'basic', 'detailed' or 'none'. See
   ## http://www.rabbitmq.com/management.html#fine-stats for more details.
   ## {rates_mode, basic},

management.rates_mode = basic

   ## Configure how long aggregated data (such as message rates and queue
   ## lengths) is retained. Please read the plugin's documentation in
   ## http://www.rabbitmq.com/management.html#configuration for more
   ## details.
   ##
   ## {sample_retention_policies,
   ##  [{global,   [{60, 5}, {3600, 60}, {86400, 1200}]},
   ##   {basic,    [{60, 5}, {3600, 60}]},
   ##   {detailed, [{10, 5}]}]}
#   ]},

# Some funny syntax
management.sample_retention_policies.global.60    = 5
management.sample_retention_policies.global.3600  = 60
management.sample_retention_policies.global.86400 = 1200

management.sample_retention_policies.basic.60   = 5
management.sample_retention_policies.basic.3600 = 60

management.sample_retention_policies.detailed.10 = 5


# Shovel is too complex for sysctl syntax. Should be defined in additinal.conf

#  ## ----------------------------------------------------------------------------
#  ## RabbitMQ Shovel Plugin
#  ##
#  ## See http://www.rabbitmq.com/shovel.html for details
#  ## ----------------------------------------------------------------------------

#  {rabbitmq_shovel,
#   [{shovels,
#     [## A named shovel worker.
#      ## {my_first_shovel,
#      ##  [

#      ## List the source broker(s) from which to consume.
#      ##
#      ##   {sources,
#      ##    [## URI(s) and pre-declarations for all source broker(s).
#      ##     {brokers, ["amqp://user:[email protected]/my_vhost"]},
#      ##     {declarations, []}
#      ##    ]},

#      ## List the destination broker(s) to publish to.
#      ##   {destinations,
#      ##    [## A singular version of the 'brokers' element.
#      ##     {broker, "amqp://"},
#      ##     {declarations, []}
#      ##    ]},

#      ## Name of the queue to shovel messages from.
#      ##
#      ## {queue, <<"your-queue-name-goes-here">>},

#      ## Optional prefetch count.
#      ##
#      ## {prefetch_count, 10},

#      ## when to acknowledge messages:
#      ## - no_ack: never (auto)
#      ## - on_publish: after each message is republished
#      ## - on_confirm: when the destination broker confirms receipt
#      ##
#      ## {ack_mode, on_confirm},

#      ## Overwrite fields of the outbound basic.publish.
#      ##
#      ## {publish_fields, [{exchange,    <<"my_exchange">>},
#      ##                   {routing_key, <<"from_shovel">>}]},

#      ## Static list of basic.properties to set on re-publication.
#      ##
#      ## {publish_properties, [{delivery_mode, 2}]},

#      ## The number of seconds to wait before attempting to
#      ## reconnect in the event of a connection failure.
#      ##
#      ## {reconnect_delay, 2.5}

#      ## ]} ## End of my_first_shovel
#     ]}
#    ## Rather than specifying some values per-shovel, you can specify
#    ## them for all shovels here.
#    ##
#    ## {defaults, [{prefetch_count,     0},
#    ##             {ack_mode,           on_confirm},
#    ##             {publish_fields,     []},
#    ##             {publish_properties, [{delivery_mode, 2}]},
#    ##             {reconnect_delay,    2.5}]}
#   ]},

#  ## ----------------------------------------------------------------------------
#  ## RabbitMQ Stomp Adapter
#  ##
#  ## See http://www.rabbitmq.com/stomp.html for details
#  ## ----------------------------------------------------------------------------

# =======================================
# STOMP section
# =======================================

#  {rabbitmq_stomp,
#   [## Network Configuration - the format is generally the same as for the broker

#    ## Listen only on localhost (ipv4 & ipv6) on a specific port.
#    ## {tcp_listeners, [{"127.0.0.1", 61613},
#    ##                  {"::1",       61613}]},

# Same as tcp_listener
stomp.listener.tcp.default = 61613

stomp.listener.ssl.default = 61614

#    ## Number of Erlang processes that will accept connections for the TCP
#    ## and SSL listeners.
#    ##
#    ## {num_tcp_acceptors, 10},
#    ## {num_ssl_acceptors, 1},

stomp.num_acceptors.tcp = 10
stomp.num_acceptors.ssl = 1

#    ## Additional SSL options

#    ## Extract a name from the client's certificate when using SSL.
#    ##
#    ## {ssl_cert_login, true},

stomp.ssl_cert_login = true

#    ## Set a default user name and password. This is used as the default login
#    ## whenever a CONNECT frame omits the login and passcode headers.
#    ##
#    ## Please note that setting this will allow clients to connect without
#    ## authenticating!
#    ##
#    ## {default_user, [{login,    "guest"},
#    ##                 {passcode, "guest"}]},

# Same syntax as AMQP
stomp.default_user = guest
stomp.default_pass = guest

#    ## If a default user is configured, or you have configured use SSL client
#    ## certificate based authentication, you can choose to allow clients to
#    ## omit the CONNECT frame entirely. If set to true, the client is
#    ## automatically connected as the default user or user supplied in the
#    ## SSL certificate whenever the first frame sent on a session is not a
#    ## CONNECT frame.
#    ##
#    ## {implicit_connect, true}
#   ]},

stomp.implicit_connect = true

#  ## ----------------------------------------------------------------------------
#  ## RabbitMQ MQTT Adapter
#  ##
#  ## See https://github.com/rabbitmq/rabbitmq-mqtt/blob/stable/README.md
#  ## for details
#  ## ----------------------------------------------------------------------------

# =======================================
# MQTT section
# =======================================

#  {rabbitmq_mqtt,
#   [## Set the default user name and password. Will be used as the default login
#    ## if a connecting client provides no other login details.
#    ##
#    ## Please note that setting this will allow clients to connect without
#    ## authenticating!
#    ##
#    ## {default_user, <<"guest">>},
#    ## {default_pass, <<"guest">>},

mqtt.default_user = guest
mqtt.default_pass = guest

#    ## Enable anonymous access. If this is set to false, clients MUST provide
#    ## login information in order to connect. See the default_user/default_pass
#    ## configuration elements for managing logins without authentication.
#    ##
#    ## {allow_anonymous, true},

mqtt.allow_anonymous = true

#    ## If you have multiple chosts, specify the one to which the
#    ## adapter connects.
#    ##
#    ## {vhost, <<"/">>},

mqtt.vhost = /

#    ## Specify the exchange to which messages from MQTT clients are published.
#    ##
#    ## {exchange, <<"amq.topic">>},

mqtt.exchange = amq.topic

#    ## Specify TTL (time to live) to control the lifetime of non-clean sessions.
#    ##
#    ## {subscription_ttl, 1800000},
mqtt.subscription_ttl = 1800000

#    ## Set the prefetch count (governing the maximum number of unacknowledged
#    ## messages that will be delivered).
#    ##
#    ## {prefetch, 10},
mqtt.prefetch = 10

#    ## TCP/SSL Configuration (as per the broker configuration).
#    ##
#    ## {tcp_listeners, [1883]},
#    ## {ssl_listeners, []},

# Same as amqp tcp_listener
mqtt.listener.tcp.default = 1883

# Same as amqp ssl_listener
mqtt.listener.ssl.default = 1884

#    ## Number of Erlang processes that will accept connections for the TCP
#    ## and SSL listeners.
#    ##
#    ## {num_tcp_acceptors, 10},
#    ## {num_ssl_acceptors, 1},

mqtt.num_acceptors.tcp = 10
mqtt.num_acceptors.ssl = 1

#    ## TCP/Socket options (as per the broker configuration).
#    ##
#    ## {tcp_listen_options, [{backlog,   128},
#    ##                       {nodelay,   true}]}
#   ]},

mqtt.tcp_listen_option.backlog = 128
mqtt.tcp_listen_option.nodelay = true

#  ## ----------------------------------------------------------------------------
#  ## RabbitMQ AMQP 1.0 Support
#  ##
#  ## See https://github.com/rabbitmq/rabbitmq-amqp1.0/blob/stable/README.md
#  ## for details
#  ## ----------------------------------------------------------------------------

# =======================================
# AMQP_1 section
# =======================================


#  {rabbitmq_amqp1_0,
#   [## Connections that are not authenticated with SASL will connect as this
#    ## account. See the README for more information.
#    ##
#    ## Please note that setting this will allow clients to connect without
#    ## authenticating!
#    ##
#    ## {default_user, "guest"},

amqp1.default_user = guest

#    ## Enable protocol strict mode. See the README for more information.
#    ##
#    ## {protocol_strict_mode, false}
#   ]},

amqp1.protocol_strict_mode = false


#  ## ----------------------------------------------------------------------------
#  ## RabbitMQ LDAP Plugin
#  ##
#  ## See http://www.rabbitmq.com/ldap.html for details.
#  ##
#  ## ----------------------------------------------------------------------------

# =======================================
# LDAP section
# =======================================

# Should be defined in additional.conf maybe?

#  {rabbitmq_auth_backend_ldap,
#   [##
#    ## Connecting to the LDAP server(s)
#    ## ================================
#    ##

#    ## Specify servers to bind to. You *must* set this in order for the plugin
#    ## to work properly.
#    ##
#    ## {servers, ["your-server-name-goes-here"]},

ldap.servers.myserver = your-server-name-goes-here

#    ## Connect to the LDAP server using SSL
#    ##
#    ## {use_ssl, false},

ldap.use_ssl = false

#    ## Specify the LDAP port to connect to
#    ##
#    ## {port, 389},

ldap.port = 389

#    ## LDAP connection timeout, in milliseconds or 'infinity'
#    ##
#    ## {timeout, infinity},

ldap.timeout = infinity

# Or number
# ldap.timeout = 500

#    ## Enable logging of LDAP queries.
#    ## One of
#    ##   - false (no logging is performed)
#    ##   - true (verbose logging of the logic used by the plugin)
#    ##   - network (as true, but additionally logs LDAP network traffic)
#    ##
#    ## Defaults to false.
#    ##
#    ## {log, false},

ldap.log = false

# Also can be true or network
# ldap.log = true
# ldap.log = network

#    ##
#    ## Authentication
#    ## ==============
#    ##

#    ## Pattern to convert the username given through AMQP to a DN before
#    ## binding
#    ##
#    ## {user_dn_pattern, "cn=${username},ou=People,dc=example,dc=com"},

ldap.user_dn_pattern = cn=${username},ou=People,dc=example,dc=com

#    ## Alternatively, you can convert a username to a Distinguished
#    ## Name via an LDAP lookup after binding. See the documentation for
#    ## full details.

#    ## When converting a username to a dn via a lookup, set these to
#    ## the name of the attribute that represents the user name, and the
#    ## base DN for the lookup query.
#    ##
#    ## {dn_lookup_attribute,   "userPrincipalName"},
#    ## {dn_lookup_base,        "DC=gopivotal,DC=com"},

ldap.dn_lookup_attribute = userPrincipalName
ldap.dn_lookup_base      = DC=gopivotal,DC=com

#    ## Controls how to bind for authorisation queries and also to
#    ## retrieve the details of users logging in without presenting a
#    ## password (e.g., SASL EXTERNAL).
#    ## One of
#    ##  - as_user (to bind as the authenticated user - requires a password)
#    ##  - anon    (to bind anonymously)
#    ##  - {UserDN, Password} (to bind with a specified user name and password)
#    ##
#    ## Defaults to 'as_user'.
#    ##
#    ## {other_bind, as_user},

ldap.other_bind = as_user

# Or can be more complex:
# ldap.other_bind.user_dn  = User
# ldap.other_bind.password = Password
# If user_dn and password defined - other options is ignored.

# -----------------------------
# Too complex section of LDAP
# -----------------------------

#    ##
#    ## Authorisation
#    ## =============
#    ##

#    ## The LDAP plugin can perform a variety of queries against your
#    ## LDAP server to determine questions of authorisation. See
#    ## http://www.rabbitmq.com/ldap.html#authorisation for more
#    ## information.

#    ## Set the query to use when determining vhost access
#    ##
#    ## {vhost_access_query, {in_group,
#    ##                       "ou=${vhost}-users,ou=vhosts,dc=example,dc=com"}},

#    ## Set the query to use when determining resource (e.g., queue) access
#    ##
#    ## {resource_access_query, {constant, true}},

#    ## Set queries to determine which tags a user has
#    ##
#    ## {tag_queries, []}
#   ]},
# -----------------------------


#   ## Lager controls logging.
#   ## See https://github.com/basho/lager for more documentation
#   {lager, [
#    ##
#    ## Log direcrory, taken from the RABBITMQ_LOG_BASE env variable by default.
#    ## {log_root, "/var/log/rabbitmq"},
#    ##
#    ## All log messages go to the default "sink" configured with
#    ## the `handlers` parameter. By default, it has a single
#    ## lager_file_backend handler writing messages to "$nodename.log"
#    ## (ie. the value of $RABBIT_LOGS).
#    ## {handlers, [
#    ##   {lager_file_backend, [{file, "rabbit.log"},
#    ##                         {level, info},
#    ##                         {date, ""},
#    ##                         {size, 0}]}
#    ## ]},
#    ##
#    ## Extra sinks are used in RabbitMQ to categorize messages. By
#    ## default, those extra sinks are configured to forward messages
#    ## to the default sink (see above). "rabbit_log_lager_event"
#    ## is the default category where all RabbitMQ messages without
#    ## a category go. Messages in the "channel" category go to the
#    ## "rabbit_channel_lager_event" Lager extra sink, and so on.
#    ## {extra_sinks, [
#    ##   {rabbit_log_lager_event, [{handlers, [
#    ##                               {lager_forwarder_backend,
#    ##                                [lager_event, info]}]}]},
#    ##   {rabbit_channel_lager_event, [{handlers, [
#    ##                                   {lager_forwarder_backend,
#    ##                                    [lager_event, info]}]}]},
#    ##   {rabbit_conection_lager_event, [{handlers, [
#    ##                                     {lager_forwarder_backend,
#    ##                                      [lager_event, info]}]}]},
#    ##   {rabbit_mirroring_lager_event, [{handlers, [
#    ##                                     {lager_forwarder_backend,
#    ##                                      [lager_event, info]}]}]}
#    ## ]}
#   ]}
# ].

log.dir = /var/log/rabbitmq

log.console       = false
log.console.level = info

log.file       = rabbit.log
log.file.level = info

log.file.rotation.date = ""
log.file.rotation.size = 0


# Possible:
log.syslog = false
log.syslog.identity = rabbitmq
log.syslog.level    = info
log.syslog.facility = daemon