wojteklu

Code is clean if it can be understood easily – by everyone on the team. Clean code can be read and enhanced by a developer other than its original author. With understandability comes readability, changeability, extensibility and maintainability.

---

General rules

1. Follow standard conventions.
2. Keep it simple stupid. Simpler is always better. Reduce complexity as much as possible.
3. Boy scout rule. Leave the campground cleaner than you found it.
4. Always find root cause. Always look for the root cause of a problem.

Design rules

dferg

Introduction

This howto describes setting up a LT2P over IPsec VPN server on your router with TomatoUSB firmware. This should allow you to connect using the built-in client to your Mac, iPhone or Android device. (Not sure about Windows.)

At the end of this tutorial, you should have a L2TP/IPsec VPN server that starts automatically on boot. Mac/iPhone/Android devices can connect with their native client and will be assigned an IP address within your LAN subnet. They should be able to talk to other devices on your LAN and should be able to contact hosts on the Internet NAT'd behind your WAN IP address.

Requirements

• Router running Shibby's fork of TomatoUSB
• entware installed to a USB stick mounted at /opt (howto)

webdevbrian

#OSX Tweaks:
===========

- Most need reboot to show changes
- Most of these tweaks are just for speed, but some are specific for development
- All of these are to be ran in terminal. The commands to be copy and pasted start after the less-than sign.
- I'm not responsible for any adverse effects to your computer, at all.


##Increase the speed of OS X dialogs boxes:

farico

<?php

/**
* Lietuviškų vardų linksniai.
*
* @author Maug Lee <[email protected]>
* @copyright Copyleft (ↄ) 2011, Maug Lee
* @version 0.3
* @package Vardai
*/