tscircuit-snippet1.jsx

import { Circuit } from "@tscircuit/core"

const circuit = new Circuit()

circuit.add(
  <board width="12mm" height="10mm">
    <chip
      name="U1"
      footprint="soic8"
      pinLabels={{ pin1: "PWR", pin8: "GND" }}
    />
    <resistor
      name="R1"
      footprint="0402"
      resistance="10k"
      pullupFor=".U1 port.2"
      pullupTo="net.5v"
      pcbX={-4}
      pcbY={0}
      pcbRotation={-90}
    />
    <capacitor
      name="C1"
      capacitance="10uF"
      footprint="0603"
      decouplingFor=".U1 port.PWR"
      decouplingTo="net.gnd"
      pcbX={4}
      pcbY={0}
      pcbRotation={-90}
    />
    <jumper pcbX={0} pcbY={-4} name="J1" footprint="pinrow4" />

    <trace from=".U1 .PWR" to="net.5v" />
    <trace from=".U1 .GND" to="net.gnd" />

    <trace from=".J1 pin.1" to="net.5v" />
    <trace from=".J1 pin.2" to=".U1 port.2" />
    <trace from=".J1 pin.3" to=".U1 port.3" />
    <trace from=".J1 pin.4" to="net.gnd" />

    <tracehint for=".C1 pin.1" offset={{ x: -2, y: 3 }} />
  </board>,
)

circuit.render()

circuit.getSvg({ view: "pcb" })