en.conf.ini

# You can download this config from: http://surge.run/config-example/ios.conf
# Edit with your computer and copy back to iOS device via iTunes, URL, AirDrop 
# or iCloud Drive
# Version 2.0

[General]
# Log level: warning, notify, info, verbose (Default: notify)
loglevel = notify
# Skip domain or IP range. These hosts will not be processed by Surge Proxy. 
# (In macOS version when Set as System Proxy enabled, these hosts will be
# applied to system network proxy settings.)
skip-proxy = 127.0.0.1, 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12, 100.64.0.0/10, localhost, *.local
# Override the DNS server provided by system.
dns-server = 8.8.8.8, 8.8.4.4
# Enable external controller access. This is for Surge-CLI and other tools.
external-controller-access = [email protected]:8888

# These parameters below are only for iOS version
# Bypass system related connection to TUN interface, and automatically add rule 
# "IP-CIDR,17.0.0.0/8,DIRECT"
bypass-system = true
# Bypass IP range for TUN interface
bypass-tun = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12
# Whether dump http traffic (huge perfermance impact) (Default: false)
replica = false
# Whether enable fully IPv6 support (Default: false)
ipv6 = false

# These parameters below are only for macOS version
# Server listen interface (Default: 127.0.0.1)
interface = 0.0.0.0
# HTTP server port (Default: 6152)
port = 6152
# SOCKS5 server port (Default: 6153)
socks = 6153

# This section declares proxy policy
# 
# OPTIONS for all proxy type:
#   interface: Optional (Default: null).
#   Force to use a specified outgoing network interface or address
#   (Only available in macOS)
#   Example: ProxyHTTP = http, 1.2.3.4, 443, username, password, interface = en2
#            en1 = direct, interface = en1
# 
# OPTIONS for proxy with tls enabled:
#   skip-common-name-verify: Optional, "true" or "false" (Default: false).
#   If this option is enabled, Surge will not verify whether the certificate 
#   common name field is matched.
[Proxy]
ProxyHTTP = http, 1.2.3.4, 443, username, password, skip-common-name-verify=false
ProxyHTTPS = http, 1.2.3.4, 443, username, password, tls=true // equivalent to "https, 1.2.3.4, 443, username, password"
ProxySOCKS5 = socks5, 1.2.3.4, 443, username, password
ProxySOCKS5TLS = socks5, 1.2.3.4, 443, username, password, tls=true

# This section declares policy group
# A policy group may contain multiple policies. It can be a proxy policy, 
# another policy group or an internal policy (DIRECT and REJECT).
# There are three group types: "select", "url-test" and "ssid"
# 
# select: Select which policy will be used from user interface
# 
# url-test: Select which policy will be used by benchmarking speed to a URL
#   OPTIONS:
#   url: Required.
#   Specify which URL will be tested.
#   interval: Optional, ms (Default: 600ms).
#   Decide how long the benchmark result will be discarded.
#   tolerance: Optional, ms (Default: 100ms).
#   Policy will be changed only when the new winner has a higher score than the 
#   old winner's score plus the tolerance.
#   timeout: Optional, s (Default: 5s). 
#   Give up a policy if not finished until timeout.
# 
# ssid: Select which policy will be used by Wi-FI SSID
#   OPTIONS:
#   default: Required. 
#   The policy when no matched SSID option found.
#   cellular: Optional. 
#   The policy under cellular network. If not provide, the default policy will 
#   be used.
[Proxy Group]
SelectGroup = select, ProxyHTTP, ProxyHTTPS, DIRECT, REJECT
AutoTestGroup = url-test, ProxySOCKS5, ProxySOCKS5TLS, url = http://www.google.com/generate_204
SSIDGroup = ssid, default = ProxyHTTP, cellular = ProxyHTTP, SSIDName = ProxySOCKS5

# This section declares outgoing policy rule
# A rule contains three basic parts:
#          TYPE,         VALUE,         POLICY
# Example: DOMAIN-SUFFIX,apple.com,     DIRECT
#          IP-CIDR,      192.168.0.0/16,ProxyA
# 
# There are three domain based rule types: "DOMAIN", "DOMAIN-SUFFIX" and 
# "DOMAIN-KEYWORD"
# 
#   OPTIONS:
#   force-remote-dns: Optional (Default: false). 
#   If a request is matched by this rule, and the policy isn't DIRECT. The DNS 
#   lookup will always happen in remote proxy server, even if the request is 
#   handled by Surge TUN interface. See manual for more information.
# 
# There are two IP based rule types: "IP-CIDR" and "GEOIP".
# If a request is using a domain. Surge need to resolve this domain to 
# determine if the request should be matched. If DNS lookup fails, the rule 
# process will be aborted and an error raises.
# 
#   OPTIONS:
#   no-resolve: Optional (Default: false). 
#   Skip this rule if the request is using a domain.
[Rule]
DOMAIN-SUFFIX,appldnld.apple.com,DIRECT
DOMAIN-SUFFIX,adcdownload.apple.com,DIRECT
DOMAIN-SUFFIX,swcdn.apple.com,DIRECT
DOMAIN-SUFFIX,phobos.apple.com,DIRECT

DOMAIN-KEYWORD,google,ProxyHTTP
DOMAIN-KEYWORD,facebook,SelectGroup
DOMAIN-KEYWORD,blogspot,AutoTestGroup
DOMAIN-KEYWORD,youtube,SSIDGroup

DOMAIN-SUFFIX,apple.com,ProxyHTTPS
DOMAIN-SUFFIX,ad.com,REJECT

IP-CIDR,192.168.0.0/16,DIRECT
IP-CIDR,10.0.0.0/8,DIRECT
IP-CIDR,172.16.0.0/12,DIRECT
IP-CIDR,127.0.0.0/8,DIRECT

GEOIP,CN,DIRECT
FINAL,ProxyHTTP

# This section declares local DNS map
# This is a equivalent function to /etc/hosts, with wildcard and alias support.
[Host]
abc.com = 1.2.3.4
*.dev = 6.7.8.9
foo.com = bar.com

# This section declares URL rewrite rules for HTTP request
# There are two rewrite types: "header" and "302"
# 
# Header Mode:
# Surge will modify the request header and redirect the request to another host 
# if necessary. The client will not feel this rewrite action. 
# But you can't redirect to an URL with HTTPS scheme.
# 
# 302 Mode:
# Surge will simplely return a 302 redirect response.
[URL Rewrite]
^http://www.google.cn http://www.google.com header
^http://yachen.com https://yach.me 302

# This section is only available in iOS. 
# You can specify some special option for a WiFi network by SSID
# 
# OPTIONS:
# suspend: "true" or "false". 
# Surge will suspend under this network. Please notice that Surge will still 
# work if you start Surge under this SSID directly. This option is only 
# triggered while network switching.
[SSID Setting]
"SSID Here" suspend=true