Golang: Demonstrate creating a CA Certificate, and Creating and Signing Certs with the CA

ca_and_cert_golang_demo.go

package main

import (
	"bytes"
	"crypto/rand"
	"crypto/rsa"
	"crypto/tls"
	"crypto/x509"
	"crypto/x509/pkix"
	"encoding/pem"
	"fmt"
	"io/ioutil"
	"math/big"
	"net"
	"net/http"
	"net/http/httptest"
	"strings"
	"time"
)

func main() {
	// get our ca and server certificate
	serverTLSConf, clientTLSConf, err := certsetup()
	if err != nil {
		panic(err)
	}

	// set up the httptest.Server using our certificate signed by our CA
	server := httptest.NewUnstartedServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
		fmt.Fprintln(w, "success!")
	}))
	server.TLS = serverTLSConf
	server.StartTLS()
	defer server.Close()

	// communicate with the server using an http.Client configured to trust our CA
	transport := &http.Transport{
		TLSClientConfig: clientTLSConf,
	}
	http := http.Client{
		Transport: transport,
	}
	resp, err := http.Get(server.URL)
	if err != nil {
		panic(err)
	}

	// verify the response
	respBodyBytes, err := ioutil.ReadAll(resp.Body)
	if err != nil {
		panic(err)
	}
	body := strings.TrimSpace(string(respBodyBytes[:]))
	if body == "success!" {
		fmt.Println(body)
	} else {
		panic("not successful!")
	}
}

func certsetup() (serverTLSConf *tls.Config, clientTLSConf *tls.Config, err error) {
	// set up our CA certificate
	ca := &x509.Certificate{
		SerialNumber: big.NewInt(2019),
		Subject: pkix.Name{
			Organization:  []string{"Company, INC."},
			Country:       []string{"US"},
			Province:      []string{""},
			Locality:      []string{"San Francisco"},
			StreetAddress: []string{"Golden Gate Bridge"},
			PostalCode:    []string{"94016"},
		},
		NotBefore:             time.Now(),
		NotAfter:              time.Now().AddDate(10, 0, 0),
		IsCA:                  true,
		ExtKeyUsage:           []x509.ExtKeyUsage{x509.ExtKeyUsageClientAuth, x509.ExtKeyUsageServerAuth},
		KeyUsage:              x509.KeyUsageDigitalSignature | x509.KeyUsageCertSign,
		BasicConstraintsValid: true,
	}

	// create our private and public key
	caPrivKey, err := rsa.GenerateKey(rand.Reader, 4096)
	if err != nil {
		return nil, nil, err
	}

	// create the CA
	caBytes, err := x509.CreateCertificate(rand.Reader, ca, ca, &caPrivKey.PublicKey, caPrivKey)
	if err != nil {
		return nil, nil, err
	}

	// pem encode
	caPEM := new(bytes.Buffer)
	pem.Encode(caPEM, &pem.Block{
		Type:  "CERTIFICATE",
		Bytes: caBytes,
	})

	caPrivKeyPEM := new(bytes.Buffer)
	pem.Encode(caPrivKeyPEM, &pem.Block{
		Type:  "RSA PRIVATE KEY",
		Bytes: x509.MarshalPKCS1PrivateKey(caPrivKey),
	})

	// set up our server certificate
	cert := &x509.Certificate{
		SerialNumber: big.NewInt(2019),
		Subject: pkix.Name{
			Organization:  []string{"Company, INC."},
			Country:       []string{"US"},
			Province:      []string{""},
			Locality:      []string{"San Francisco"},
			StreetAddress: []string{"Golden Gate Bridge"},
			PostalCode:    []string{"94016"},
		},
		IPAddresses:  []net.IP{net.IPv4(127, 0, 0, 1), net.IPv6loopback},
		NotBefore:    time.Now(),
		NotAfter:     time.Now().AddDate(10, 0, 0),
		SubjectKeyId: []byte{1, 2, 3, 4, 6},
		ExtKeyUsage:  []x509.ExtKeyUsage{x509.ExtKeyUsageClientAuth, x509.ExtKeyUsageServerAuth},
		KeyUsage:     x509.KeyUsageDigitalSignature,
	}

	certPrivKey, err := rsa.GenerateKey(rand.Reader, 4096)
	if err != nil {
		return nil, nil, err
	}

	certBytes, err := x509.CreateCertificate(rand.Reader, cert, ca, &certPrivKey.PublicKey, caPrivKey)
	if err != nil {
		return nil, nil, err
	}

	certPEM := new(bytes.Buffer)
	pem.Encode(certPEM, &pem.Block{
		Type:  "CERTIFICATE",
		Bytes: certBytes,
	})

	certPrivKeyPEM := new(bytes.Buffer)
	pem.Encode(certPrivKeyPEM, &pem.Block{
		Type:  "RSA PRIVATE KEY",
		Bytes: x509.MarshalPKCS1PrivateKey(certPrivKey),
	})

	serverCert, err := tls.X509KeyPair(certPEM.Bytes(), certPrivKeyPEM.Bytes())
	if err != nil {
		return nil, nil, err
	}

	serverTLSConf = &tls.Config{
		Certificates: []tls.Certificate{serverCert},
	}

	certpool := x509.NewCertPool()
	certpool.AppendCertsFromPEM(caPEM.Bytes())
	clientTLSConf = &tls.Config{
		RootCAs: certpool,
	}

	return
}

LICENSE

This is free and unencumbered software released into the public domain.

Anyone is free to copy, modify, publish, use, compile, sell, or
distribute this software, either in source code form or as a compiled
binary, for any purpose, commercial or non-commercial, and by any
means.

In jurisdictions that recognize copyright laws, the author or authors
of this software dedicate any and all copyright interest in the
software to the public domain. We make this dedication for the benefit
of the public at large and to the detriment of our heirs and
successors. We intend this dedication to be an overt act of
relinquishment in perpetuity of all present and future rights to this
software under copyright law.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.

For more information, please refer to <https://unlicense.org>

@Ran-Xing check it here https://github.com/reddec/ssl-cp/blob/next/service/certificates.go

@reddec Your project is very good

Hey @shaneutt, thanks for the code. On line 130, isn't it certPrivKey not caPrivKey?

Hi @yakuter,

The caPrivKey argument is given to the priv parameter in x509.CreateCertificate() which has the following documentation:

The certificate is signed by parent. If parent is equal to template then the
certificate is self-signed. The parameter pub is the public key of the
certificate to be generated and priv is the private key of the signer.

It is my understanding that if you use the certPrivKey in place of the caPrivKey when creating the x509 certificate on :130 you are instructing the certificate to sign itself, rather than being signed by the CA which will be added to the rootCA trust of the HTTP client. In either case if you make this change the program fails:

Get "https://127.0.0.1:40245": x509: certificate signed by unknown authority

To me this makes sense: we want the CA cert we created to be the signer, but perhaps I've made some mistake or missed something? Did you run into some problem when using the code or was there some other context that led you to believe there's a mistake here?

Yeah I got it. Thanks for the explanation @shaneutt

h := "127.0.0.1"
certificate := &x509.Certificate{
	Subject: pkix.Name{
		CommonName:   commonName,
	},
+	IPAddresses: []net.IP{net.ParseIP(h)},
}
if net.ParseIP(h) != nil {
-	certificate.IPAddresses = []net.IP{net.ParseIP(h)}
}

I found many cases in the gist and found that IPAddresses cannot be added @ certificate.IPAddresses = []net.IP{net.ParseIP(h)}
Do you know why this is? @shaneutt

@XRSec not sure if I'm understanding the problem: using net.ParseIP("127.0.0.1") should be equivalent to the example I provided above that uses net.IPv4(127, 0, 0, 1), e.g.:

gore> :import net
gore> :import reflect
gore> a := net.ParseIP("127.0.0.1")
net.IP{
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x01,
}
gore> b := net.IPv4(127,0,0,1)
net.IP{
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x01,
}
gore> reflect.DeepEqual(a,b)
true

What are you seeing that suggests to you that it can't be added, are you receiving some kind of error?

For some simple testing you can manually verify whether the IP address you add to an x509 certificate in Go is included in the SAN using the openssl command line. For instance I ran the following by connecting to the httptest server using the exact code from above:

$ openssl s_client -connect localhost:39781 | openssl x509 -noout -text |grep -B 1 'IP Address'
            X509v3 Subject Alternative Name: 
                IP Address:127.0.0.1, IP Address:0:0:0:0:0:0:0:1

Thanks @shaneutt for this blog. it is helping me to automate certificate generation to be used for etcd cluster for my project ksctl 😄

This code helps a lot! Note that Safari may reject a certificate filled NotBefore as time.Now() displaying that "xxx certificate is not standards compliant". Changing it to time.Now().Add(-1 * time.Hour) solves the problem.

hey @shaneutt thank you for this - I was able to use it to build unit tests: https://github.com/aceeric/ociregistry/blob/main/impl/upstream/queue_test.go - thanks!

How to get the CSR(Certificate Signing Request) file in this proceed.

Nice one! Thank you!