PiKVM on RockPro installation

pikvm-install.sh

# For installing PiKVM on RockPro64 with HDMI-USB Capture device.
# Install Manjaro linux

# Run this script as sudo pikvm-install.sh

# Enable Otg on USB-C Port

pacman -Syu --noconfirm dtc
fdtput -t s /boot/dtbs/rockchip/rk3399-rockpro64.dtb /usb@fe800000/usb@fe800000 dr_mode peripheral

export PIKVM_REPO_KEY=912C773ABBD1B584
export PIKVM_REPO_URL=https://pikvm.org/repos
export BOARD=rpi4 
export ARCH=arm
export WEBUI_ADMIN_PASSWD=admin
export IPMI_ADMIN_PASSWD=admin
export PLATFORM=v2-hdmiusb

mkdir -p /etc/gnupg
echo standard-resolver >> /etc/gnupg/dirmngr.conf
pacman-key --keyserver hkps://keyserver.ubuntu.com:443 -r $PIKVM_REPO_KEY \
	|| pacman-key --keyserver hkps://keys.gnupg.net:443 -r $PIKVM_REPO_KEY \
	|| pacman-key --keyserver hkps://pgp.mit.edu:443 -r $PIKVM_REPO_KEY \

pacman-key --lsign-key $PIKVM_REPO_KEY
echo -e "\n[pikvm]" >> /etc/pacman.conf
echo "Server = $PIKVM_REPO_URL/$BOARD-$ARCH" >> /etc/pacman.conf
echo "SigLevel = Required DatabaseOptional" >> /etc/pacman.conf

pacman -Syu kvmd

systemctl enable kvmd-nginx

curl -o /etc/kvmd/main.yaml https://raw.githubusercontent.com/pikvm/kvmd/master/configs/kvmd/main/v2-hdmiusb-rpi4.yaml

echo libcomposite > /etc/modules-load.d/99-kvmd.conf
modprobe libcomposite

curl -o /etc/sudoers.d/99-kvmd https://raw.githubusercontent.com/pikvm/kvmd/master/configs/os/sudoers/v2-hdmiusb

curl -o /etc/udev/rules.d/99-kvmd.rules https://raw.githubusercontent.com/pikvm/kvmd/master/configs/os/udev/v2-hdmiusb-rpi4.rules

udevadm control -R
udevadm trigger


printf "kvmd:\n  msd:\n    remount_cmd: /bin/true\n" >> /etc/kvmd/override.yaml

mkdir /var/lib/kvmd/msd/images
mkdir /var/lib/kvmd/msd/meta

chown kvmd:root /var/lib/kvmd/msd/images
chown kvmd:root /var/lib/kvmd/msd/meta

systemctl enable kvmd-otg

sed -i 's/) exit 1;;/) exit 0;;/g' /usr/bin/kvmd-udev-hdmiusb-check
curl -o /opt/vc/bin/vcgencmd https://raw.githubusercontent.com/Yura80/os/master/pikvm/vcgencmd


pacman -S --noconfirm git make gcc libevent libjpeg-turbo libutil-linux libbsd

git clone https://github.com/pikvm/ustreamer.git
cd ustreamer
make


cp ./ustreamer /usr/bin/ustreamer

systemctl enable kvmd

echo "Your system is all set to reboot now"
# Reboot system

The communication flow is

Web Interface (Browser) -> Web Socket -> PiKVM (kvmd) -> Linux Kernel Gadget -> USB -> Remote Server.

If you are porting it to iMX8, then you don't need to worry about this but

1. Make sure Linux Kernel for iMX8 and iMX8 has USB Gadget ( OTG ) support
2. Enable Linux USB Device Mode for iMX8
3. Install arch linux based distro
4. Install pikvm using my script.

Rest all will be taken care of.

Once you reach this point then, you can start thinking of hardware accelerated encoding on iMX8 for ustreamer

Hi

As per your suggestions I have tried your script for building os for iMX8 board, got some error affter running your script and working on resolving the error.

Also,
I am working on to creating software architecture of piKVM. I have made a basic skeleton for architecture, would you please have a look into it and help me for better understanding it.

Could you please suggest If I missed anything in this.

My script is quite old so might not be compatible with recent changes.
As far as my undertstanding goes the diagram looks ok to me.
I would suggest you jump onto PiKVM Discord and discuss there. You would find many people who can answer your queries.

rror: failed retrieving file 'pikvm.db' from pikvm.org : The requested URL returned error: 404

rror: failed retrieving file 'pikvm.db' from pikvm.org : The requested URL returned error: 404

You need to update your pacman pikvm config to the following:
[pikvm]
Server = https://files.pikvm.org/repos/arch/rpi4-arm
SigLevel = Required DatabaseOptional