µPing: Ping library for MicroPython

uping.py

# µPing (MicroPing) for MicroPython
# copyright (c) 2018 Shawwwn <[email protected]>
# License: MIT

# Internet Checksum Algorithm
# Author: Olav Morken
# https://github.com/olavmrk/python-ping/blob/master/ping.py
# @data: bytes
def checksum(data):
    if len(data) & 0x1: # Odd number of bytes
        data += b'\0'
    cs = 0
    for pos in range(0, len(data), 2):
        b1 = data[pos]
        b2 = data[pos + 1]
        cs += (b1 << 8) + b2
    while cs >= 0x10000:
        cs = (cs & 0xffff) + (cs >> 16)
    cs = ~cs & 0xffff
    return cs

def ping(host, count=4, timeout=5000, interval=10, quiet=False, size=64):
    import utime
    import uselect
    import uctypes
    import usocket
    import ustruct
    import urandom

    # prepare packet
    assert size >= 16, "pkt size too small"
    pkt = b'Q'*size
    pkt_desc = {
        "type": uctypes.UINT8 | 0,
        "code": uctypes.UINT8 | 1,
        "checksum": uctypes.UINT16 | 2,
        "id": uctypes.UINT16 | 4,
        "seq": uctypes.INT16 | 6,
        "timestamp": uctypes.UINT64 | 8,
    } # packet header descriptor
    h = uctypes.struct(uctypes.addressof(pkt), pkt_desc, uctypes.BIG_ENDIAN)
    h.type = 8 # ICMP_ECHO_REQUEST
    h.code = 0
    h.checksum = 0
    h.id = urandom.getrandbits(16)
    h.seq = 1

    # init socket
    sock = usocket.socket(usocket.AF_INET, usocket.SOCK_RAW, 1)
    sock.setblocking(0)
    sock.settimeout(timeout/1000)
    addr = usocket.getaddrinfo(host, 1)[0][-1][0] # ip address
    sock.connect((addr, 1))
    not quiet and print("PING %s (%s): %u data bytes" % (host, addr, len(pkt)))

    seqs = list(range(1, count+1)) # [1,2,...,count]
    c = 1
    t = 0
    n_trans = 0
    n_recv = 0
    finish = False
    while t < timeout:
        if t==interval and c<=count:
            # send packet
            h.checksum = 0
            h.seq = c
            h.timestamp = utime.ticks_us()
            h.checksum = checksum(pkt)
            if sock.send(pkt) == size:
                n_trans += 1
                t = 0 # reset timeout
            else:
                seqs.remove(c)
            c += 1

        # recv packet
        while 1:
            socks, _, _ = uselect.select([sock], [], [], 0)
            if socks:
                resp = socks[0].recv(4096)
                resp_mv = memoryview(resp)
                h2 = uctypes.struct(uctypes.addressof(resp_mv[20:]), pkt_desc, uctypes.BIG_ENDIAN)
                # TODO: validate checksum (optional)
                seq = h2.seq
                if h2.type==0 and h2.id==h.id and (seq in seqs): # 0: ICMP_ECHO_REPLY
                    t_elasped = (utime.ticks_us()-h2.timestamp) / 1000
                    ttl = ustruct.unpack('!B', resp_mv[8:9])[0] # time-to-live
                    n_recv += 1
                    not quiet and print("%u bytes from %s: icmp_seq=%u, ttl=%u, time=%f ms" % (len(resp), addr, seq, ttl, t_elasped))
                    seqs.remove(seq)
                    if len(seqs) == 0:
                        finish = True
                        break
            else:
                break

        if finish:
            break

        utime.sleep_ms(1)
        t += 1

    # close
    sock.close()
    ret = (n_trans, n_recv)
    not quiet and print("%u packets transmitted, %u packets received" % (n_trans, n_recv))
    return (n_trans, n_recv)

Thank you so much, this is really, really useful on the RPi Pico-W with RP2040 and CYW43439 running MicroPython v1.23.0.

I can ping other devices within the same WLAN as well as servers in the internet.

There is one little "problem" though: I cannot ping the local host, neither by 127.0.0.1 nor by using the WLAN-IP-Address:

• uping.ping('127.0.0.1') results in

  PING 127.0.0.1 (127.0.0.1): 64 data bytes
  Traceback (most recent call last):
    File "<stdin>", line 1, in <module>
    File "/lib/uping.py", line 71, in ping
  OSError: [Errno 113] EHOSTUNREACH
  

• uping.ping('192.168.178.81') with 192.168.178.81 being the current IP address of the Pico-W results in

  PING 192.168.178.81 (192.168.178.81): 64 data bytes
  4 packets transmitted, 0 packets received
  (4, 0)
  

  Even if I try several times, I always get (4, 0).

My question is: Is this due to the way how uping.py is implemented or is this due to the underlying lwIP-Module of MicroPython?