logstash-cert.sh

# Create Key
openssl genrsa -des3 -out logstash.key 1024
sudo openssl genrsa -des3 -out logstash.key 1024
# Create CSR
openssl req -new -key logstash.key -out logstash.csr
sudo openssl req -new -key logstash.key -out logstash.csr
# Remove password from key
sudo openssl rsa -in logstash.key.org -out logstash.key
# Create certificate
sudo openssl x509 -req -days 365 -in logstash.csr -signkey server.key -out logstash.crt
sudo openssl x509 -req -days 365 -in logstash.csr -signkey logstash.key -out logstash.crt

lumberjack

LUMBERJACK_OPTIONS="--field origin=dev42 --host 172.16.0.52 --port 5555 --ssl-ca-path /etc/ssl/logstash.crt /opt/apps/docs.intranet.mckinsey.com/shared/log/logstash_devutility.log"

lumberjack-suse

#! /bin/sh
# BEGIN INIT INFO
# Provides:          lumberjack
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start daemon at boot time
# Description:       Enable service provided by daemon.
### END INIT INFO
 
. /lib/lsb/init-functions
 
name="lumberjack"
 
# Read configuration variable file if it is present
[ -r /etc/default/$name ] && . /etc/default/$name
 
LUMBERJACK_BIN="/opt/lumberjack/bin/lumberjack"
test -x $LUMBERJACK_BIN || exit 5
PID_FILE="/var/run/$name.pid"
LOG_FILE="/var/log/$name"
CONFIG_FILE=/etc/default/$name
cwd=`pwd`
LD_LIBRARY_PATH="/opt/lumberjack/lib/"
export LD_LIBRARY_PATH
 
# Check for missing binaries
LUMBERJACK_BIN="/opt/lumberjack/bin/lumberjack"
test -x $LUMBERJACK_BIN || { echo "$LUMBERJACK_BIN not installed";
        if [ "$1" = "stop" ]; then exit 0;
        else exit 5; fi; }
 
# Check for existence of needed config file and read it
test -r $CONFIG_FILE || { echo "$CONFIG_FILE not existing";
        if [ "$1" = "stop" ]; then exit 0;
        else exit 6; fi; }
 
# Read config
. $CONFIG_FILE
 
# Load the rc.status script for this service.
. /etc/rc.status
 
# Reset status of this service
rc_reset
 
case $1 in
        start)
                echo -n "Starting $name: "
                ## Start daemon with startproc(8). If this fails
                ## the return value is set appropriately by startproc.
                pid=$(startproc -v -p $PID_FILE -l $LOG_FILE $LUMBERJACK_BIN $LUMBERJACK_OPTIONS)
                # Remember status and be verbose
                rc_status -v
                if [[ "$pid" =~ ^[0-9]+$ ]]; then
                  echo $pid > $PID_FILE
                else
                  exit 1  
                fi 
                ;;
        stop)
                echo -n "Stopping $name: "
                ## Stop daemon with killproc(8) and if this fails
                ## killproc sets the return value according to LSB.
                killproc -p $PID_FILE -TERM $LUMBERJACK_BIN
 
                # Remember status and be verbose
                rc_status -v
                
                ;;
        restart)
                echo -n "Restarting $name: "
                ## Stop the service and regardless of whether it was
                ## running or not, start it again.
                $0 stop
                $0 start
 
                # Remember status and be quiet
                rc_status
                ;;
        status)
                ## Check status with checkproc(8), if process is running
                ## checkproc will return with exit status 0.
 
                # Status has a slightly different for the status command:
                # 0 - service running
                # 1 - service dead, but /var/run/  pid  file exists
                # 2 - service dead, but /var/lock/ lock file exists
                # 3 - service not running
 
                # NOTE: checkproc returns LSB compliant status values.
                checkproc -p $PID_FILE $LUMBERJACK_BIN
                 # NOTE: rc_status knows that we called this init script with
                # "status" option and adapts its messages accordingly.
                rc_status -v
                ;;
        *)
                echo "Usage: $0 {start|stop|restart|status}"
                exit 1
                ;;
esac
 
exit 0

lumberjack-ubuntu

#! /bin/sh
# BEGIN INIT INFO
# Provides:          lumberjack-nginx
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start daemon at boot time
# Description:       Enable service provided by daemon.
### END INIT INFO
 
. /lib/lsb/init-functions
 
name="lumberjack-nginx"
 
# Read configuration variable file if it is present
[ -r /etc/default/$name ] && . /etc/default/$name
 
lumberjack_bin="/opt/lumberjack/bin/lumberjack.sh"
pid_file="/var/run/$name.pid"
cwd=`pwd`
 
start () {
        command="${lumberjack_bin}"
 
        if start-stop-daemon --start --quiet --oknodo --pidfile "$pid_file" -b -m -N 19 --exec $command -- $LUMBERJACK_OPTIONS; then
                log_end_msg 0
        else
                log_end_msg 1
        fi
}
 
stop () {
        start-stop-daemon --stop --quiet --oknodo --pidfile "$pid_file"
}
 
status () {
        status_of_proc -p $pid_file "" "$name"
}
 
case $1 in
        start)
                if status; then exit 0; fi
                echo -n "Starting $name: "
                start
                echo "$name."
                ;;
        stop)
                echo -n "Stopping $name: "
                stop
                echo "$name."
                ;;
        restart)
                echo -n "Restarting $name: "
                stop
                sleep 1
                start
                echo "$name."
                ;;
        status)
                status && exit 0 || exit $?
                ;;
        *)
                echo "Usage: $0 {start|stop|restart|status}"
                exit 1
                ;;
esac
 
exit 0