TP-Link Router Config Decrypt

tp.md

TP-Link Router Config

Update 2021-04-29: This may still work for you if you've got an old TP-Link router, but this is not maintained and doesn't work with newer models. If you've got a newer router, other projects like tpconf_bin_xml will likely work better for you.

TP-Link allows you to backup and restore your router's config file. For some reason, they decided to encrypt these backups so you cannot modify them. I think this is dumb. This script lets you decrypt and re-encrypt your config files so you can modify them as you see fit.

I use this to modify my reserved addresses list because editing them through the web interface is terribly slow and cumbersome.

1. Go to the router and download the config file from the "Backup & Restore" section of "System Tools".
2. Run ruby tp.rb config.bin
3. Edit the created config file config.cfg as you please.
4. Run ruby tp.rb config.cfg
5. Return to the "Backup & Restore" section and upload your modified config.bin file.

This work is based on the hack by Matteo Croce here. Thank you for doing the hard part.

tp.rb

#!/usr/bin/env ruby

require 'openssl'

infile = ARGV[0]
content = File.read(infile)

mode = infile.end_with?('.bin') ? :decrypt : :encrypt

# Configure the cipher with what we know about the TP-Link encryption
cipher = OpenSSL::Cipher::DES.new(:ECB)
cipher.key = ["478DA50BF9E3D2CF"].pack("H*")
cipher.padding = 0

case mode
when :decrypt
  cipher.decrypt
  plaintext = cipher.update(content) + cipher.final

  # First 16 bytes are checksum of content
  reported_checksum = plaintext[0...16]
  plaintext = plaintext[16..-1]

  # Trim empty bytes used to pad out the plaintext to be multiple of 8
  plaintext = plaintext[0...-1] while plaintext.end_with?("\x0")
  checksum = OpenSSL::Digest::MD5.digest(plaintext)

  if reported_checksum != checksum
    $stderr.puts "Checksums do not match"
    $stderr.puts "reported: " << reported_checksum.bytes.map { |b| b.to_s(16) }.join
    $stderr.puts "actual:   " << checksum.bytes.map { |b| b.to_s(16) }.join
  end

  File.write(infile.sub('.bin', '.cfg'), plaintext)
when :encrypt
  # The body is prefixed with the 16 byte md5 checksum of the contents
  checksum = OpenSSL::Digest::MD5.digest(content)
  body = checksum + content

  # The body needs to be padded out with zero bytes until the byte
  # length is a multiple of 8.
  remaining = 8 - (body.length % 8)
  pad = remaining == 8 ? '' : ("\x0" * remaining)

  # Set the cipher to encryption mode and perform the action
  cipher.encrypt
  ciphertext = cipher.update(body + pad) + cipher.final
  File.write(infile.sub('.cfg', '.bin'), ciphertext)
end

This script appears out of date, and no longer functional for newer TL-LINK devices.
tpconf_bin, a similar project is a working alternative to this

@sengiv thanks. I'll add that and a deprecation notice to this.

this may help
https://github.com/ret5et/tplink_backup_decrypt_2022.bin

This still works tho. I have a tp-link wifi extender WA860RE and works great. This script will work with tp link products that used DES ecb encryption. Of course I had to use rvm to install an older version of ruby and also openssl 1.0.0 with rvm too, this because OpenSSL 3.0 will give an error on line 11. The DES algorithm was deprecated in newer openSSL. So we have to use openSSL 1.0 that rvm installs by default. Tested it on Ubuntu 22.04 LTS:

• rvm pkg install openssl
• rvm remove 2.7.2
• rvm install 2.7.2 --with-openssl-dir=$HOME/.rvm/usr

If you are willing to try this script do this and you're ready to go.
Thanks a lot Violet for this code! It works like a charm ;) xx