Descriptive JSON of Edison Mini Breakout Pins

edison_pins.json

[
  { 
    "jumper": 17, 
    "pin": 1, 
    "name": "GP182_PWM2",
    "description": "GPIO capable of PWM output.",
    "tags": ["gpio", "pwm"]
  },
  { 
    "jumper": 17, 
    "pin": 2, 
    "name": "NC",
    "description": "No connect",
    "tags": ["nc"]
  },
  { 
    "jumper": 17, 
    "pin": 3, 
    "name": "NC",
    "description": "No connect",
    "tags": ["nc"]
  },
  { 
    "jumper": 17, 
    "pin": 4, 
    "name": "VIN",
    "description": "7 to 15V input",
    "tags": ["power"]
  },
  { 
    "jumper": 17, 
    "pin": 5, 
    "name": "GP135/UART2_TX",
    "description": "GPIO, UART2 transmit output.",
    "tags": ["gpio", "uart", "uart2"]
  },
  { 
    "jumper": 17, 
    "pin": 6, 
    "name": "RCVR_MODE",
    "description": "Used for firmware recovery",
    "tags": ["misc"]
  },
  { 
    "jumper": 17, 
    "pin": 7, 
    "name": "GP27/I2C6_SCL",
    "description": "GPIO or I2C6 clock line",
    "tags": ["gpio", "i2c", "i2c6"]
  },
  { 
    "jumper": 17, 
    "pin": 8, 
    "name": "GP20/I2C1_SDA",
    "description": "GPIO or I2C1 data line",
    "tags": ["gpio", "i2c", "i2c1"]
  },
  { 
    "jumper": 17, 
    "pin": 9, 
    "name": "GP28/I2C6_SDA",
    "description": "GPIO or I2C6 data line",
    "tags": ["gpio", "i2c", "i2c6"]
  },
  { 
    "jumper": 17, 
    "pin": 10, 
    "name": "GP111/SSP5_FS1",
    "description": "GPIO or SPI chip select 1",
    "tags": ["gpio", "spi"]
  },
  { 
    "jumper": 17, 
    "pin": 11, 
    "name": "GP109/SSP5_CLK",
    "description": "GPIO or SPI clock line",
    "tags": ["gpio", "spi"]
  },
  { 
    "jumper": 17, 
    "pin": 12, 
    "name": "GP115/SSP5_TXD",
    "description": "GPIO or SPI MOSI",
    "tags": ["gpio", "spi"]
  },
  { 
    "jumper": 17, 
    "pin": 13, 
    "name": "OSC_CLK_OUT_0",
    "description": "High speed clock output",
    "tags": ["clock"]
  },
  { 
    "jumper": 17, 
    "pin": 14, 
    "name": "GP128/UART1_CTS",
    "description": "GPIO or UART1 clear to send input",
    "tags": ["gpio", "uart", "uart1"]
  },
  { 
    "jumper": 18, 
    "pin": 1, 
    "name": "GP13_PWM1",
    "description": "GPIO capable of PWM output",
    "tags": ["gpio", "pwm"]
  },
  { 
    "jumper": 18, 
    "pin": 2, 
    "name": "GP165",
    "description": "GPIO",
    "tags": ["gpio"]
  },
  { 
    "jumper": 18, 
    "pin": 3, 
    "name": "GPI_PWRBTN_N",
    "description": "Power button input",
    "tags": ["power"]
  },
  { 
    "jumper": 18, 
    "pin": 4, 
    "name": "MSIC_SLP_CLK2",
    "description": "32 kHz sleep clock",
    "tags": ["clock"]
  },
  { 
    "jumper": 18, 
    "pin": 5, 
    "name": "V_VBAT_BKUP",
    "description": "RTC backup battery input",
    "tags": ["power", "battery"]
  },
  { 
    "jumper": 18, 
    "pin": 6, 
    "name": "GP19/I2C1_SCL",
    "description": "GPIO or I2C1 clock line",
    "tags": ["gpio", "i2c", "i2c1"]
  },
  { 
    "jumper": 18, 
    "pin": 7, 
    "name": "GP12_PWM0",
    "description": "GPIO capable of PWM output",
    "tags": ["gpio", "pwm"]
  },
  { 
    "jumper": 18, 
    "pin": 8, 
    "name": "GP183_PWM3",
    "description": "GPIO capable of PWM output",
    "tags": ["gpio", "pwm"]
  },
  { 
    "jumper": 18, 
    "pin": 9, 
    "name": "NC",
    "description": "No connect",
    "tags": ["nc"]
  },
  { 
    "jumper": 18, 
    "pin": 10, 
    "name": "GP110/SSP5_FS0",
    "description": "GPIO or SPI chip select 0",
    "tags": ["gpio", "spi"]
  },
  { 
    "jumper": 18, 
    "pin": 11, 
    "name": "GP114/SSP5_RX",
    "description": "GPIO or SPI MISO",
    "tags": ["gpio", "spi"]
  },
  { 
    "jumper": 18, 
    "pin": 12, 
    "name": "GP129/UART1_RTS",
    "description": "GPIO or UART1 ready to send output",
    "tags": ["gpio", "uart", "uart1"]
  },
  { 
    "jumper": 18, 
    "pin": 13, 
    "name": "GP130/UART1_RX",
    "description": "GPIO or UART1 receive line",
    "tags": ["gpio", "uart", "uart1"]
  },
  { 
    "jumper": 18, 
    "pin": 14, 
    "name": "FW_RCVR",
    "description": "Firmware recovery. Active high on boot",
    "tags": ["misc"]
  },
  { 
    "jumper": 19, 
    "pin": 1, 
    "name": "NC",
    "description": "No connect",
    "tags": ["nc"]
  },
  { 
    "jumper": 19, 
    "pin": 2, 
    "name": "V_V1P80",
    "description": "System 1.8V I/O output power",
    "tags": ["power"]
  },
  { 
    "jumper": 19, 
    "pin": 3, 
    "name": "GND",
    "description": "Ground",
    "tags": ["power", "ground"]
  },
  { 
    "jumper": 19, 
    "pin": 4, 
    "name": "GP44/ALS_INT_N",
    "description": "GPIO or ALS interrupt input",
    "tags": ["gpio"]
  },
  { 
    "jumper": 19, 
    "pin": 5, 
    "name": "GP46/ACCELEROMETER_INT_1",
    "description": "GPIO or accelerometer interrupt input",
    "tags": ["gpio", "accelerometer"]
  },
  { 
    "jumper": 19, 
    "pin": 6, 
    "name": "GP48/GYRO_DRDY",
    "description": "GPIO or gyro data ready input",
    "tags": ["gpio", "gyro"]
  },
  { 
    "jumper": 19, 
    "pin": 7, 
    "name": "RESET_OUT#",
    "description": "System reset out low",
    "tags": ["misc", "reset"]
  },
  { 
    "jumper": 19, 
    "pin": 8, 
    "name": "GP131/UART1_TX",
    "description": "GPIO or UART1 transmit line",
    "tags": ["gpio", "uart", "uart1"]
  },
  { 
    "jumper": 19, 
    "pin": 9, 
    "name": "GP14/AUDIO_CODEC_INT",
    "description": "GPIO or audio codec interrupt",
    "tags": ["gpio", "audio"]
  },
  { 
    "jumper": 19, 
    "pin": 10, 
    "name": "GP40/SSP2_CLK",
    "description": "GPIO or SSP2 clock output",
    "tags": ["gpio", "i2s"]
  },
  { 
    "jumper": 19, 
    "pin": 11, 
    "name": "GP43/SSP2_TXD",
    "description": "GPIO or SSP2 data output",
    "tags": ["gpio", "i2s"]
  },
  { 
    "jumper": 19, 
    "pin": 12, 
    "name": "GP77/SD_CDN",
    "description": "GPIO or SD card detect (active low)",
    "tags": ["gpio", "sd"]
  },
  { 
    "jumper": 19, 
    "pin": 13, 
    "name": "GP82/SD_DAT2",
    "description": "GPIO or SD data 2",
    "tags": ["gpio", "sd"]
  },
  { 
    "jumper": 19, 
    "pin": 14, 
    "name": "GP83/SD_DAT3",
    "description": "GPIO or SD data 3",
    "tags": ["gpio", "sd"]
  },
  { 
    "jumper": 20, 
    "pin": 1, 
    "name": "V_VSYS",
    "description": "System input power",
    "tags": ["power"]
  },
  { 
    "jumper": 20, 
    "pin": 2, 
    "name": "V_V3P30",
    "description": "System 3.3V output",
    "tags": ["power"]
  },
  { 
    "jumper": 20, 
    "pin": 3, 
    "name": "GP134/UART2_RX",
    "description": "GPIO or UART2 receive",
    "tags": ["gpio", "uart", "uart2"]
  },
  { 
    "jumper": 20, 
    "pin": 4, 
    "name": "GP45/COMPASS_DRDY",
    "description": "GPIO or compass data ready input",
    "tags": ["gpio", "compass"]
  },
  { 
    "jumper": 20, 
    "pin": 5, 
    "name": "GP47/ACCELEROMETER_INT_2",
    "description": "GPIO or accelerometer interrupt 2",
    "tags": ["gpio", "accelerometer"]
  },
  { 
    "jumper": 20, 
    "pin": 6, 
    "name": "GP49/GYRO_INT",
    "description": "GPIO or gyro interrupt",
    "tags": ["gpio", "gyro"]
  },
  { 
    "jumper": 20, 
    "pin": 7, 
    "name": "GP15",
    "description": "GPIO",
    "tags": ["gpio"]
  },
  { 
    "jumper": 20, 
    "pin": 8, 
    "name": "GP84/SD_CLK_FB",
    "description": "GPIO or SD clock feedback",
    "tags": ["gpio", "sd"]
  },
  { 
    "jumper": 20, 
    "pin": 9, 
    "name": "GP42/SSP2_RXD",
    "description": "GPIO or SSP2 receive data",
    "tags": ["gpio", "i2s"]
  },
  { 
    "jumper": 20, 
    "pin": 10, 
    "name": "GP41/SSP2_FS",
    "description": "GPIO or SSP2 frame sync output",
    "tags": ["gpio", "i2s"]
  },
  { 
    "jumper": 20, 
    "pin": 11, 
    "name": "GP78/SD_CLK",
    "description": "GPIO or SD clock",
    "tags": ["gpio", "sd"]
  },
  { 
    "jumper": 20, 
    "pin": 12, 
    "name": "GP79/SD_CMD",
    "description": "GPIO or SD command",
    "tags": ["gpio", "sd"]
  },
  { 
    "jumper": 20, 
    "pin": 13, 
    "name": "GP80/SD_DAT0",
    "description": "GPIO or SD data 0",
    "tags": ["gpio", "sd"]
  },
  { 
    "jumper": 20, 
    "pin": 14, 
    "name": "GP81/SD_DAT1",
    "description": "GPIO or SD data 1",
    "tags": ["gpio", "sd"]
  }
]