Simon Gardner simg

I'm writing this post to publicly come out as trans (specifically: I wish to transition to become a woman).

This post won't be as polished or edited as my usual posts, because that's kind of the point: I'm tired of having to edit myself to make myself acceptable to others.

I'm a bit scared to let people know that I'm trans, especially because I'm not yet in a position where I can transition (for reasons I don't want to share, at least not in public) and it's really shameful. However, I'm getting really

Optics By Example Cheat Sheets

The following are appendices from Optics By Example, a comprehensive guide to optics from beginner to advanced! If you like the content below, there's plenty more where that came from; pick up the book!

Operators
Composition Guide
Substitution Guide
Optical Constarints and Types

Operator Cheat Sheet

Gmail and GitHub

How to filter emails from GitHub in Gmail and flag them with labels.

The labels in this document are just examples.

Pull Request

Filter	Label

Code is clean if it can be understood easily – by everyone on the team. Clean code can be read and enhanced by a developer other than its original author. With understandability comes readability, changeability, extensibility and maintainability.

General rules

Follow standard conventions.
Keep it simple stupid. Simpler is always better. Reduce complexity as much as possible.
Boy scout rule. Leave the campground cleaner than you found it.
Always find root cause. Always look for the root cause of a problem.

	# Be warned: This is just a first try and still very much work in progress - no guarantees given whatsoever!
	#
	# To install the ESPHome firmware on the WiCAN for the first time (before being able to use ESPHome OTA), I built the firmware
	# for download (in "modern" format) and then used the following command line on Linux:
	# esptool.py --before=default_reset --after=hard_reset --no-stub write_flash --flash_mode dio --flash_freq 80m --flash_size 4MB 0x0 /home/.../Downloads/m-wican-factory.bin
	#
	# Don't forget to short the pins to enable boot mode (https://github.com/meatpiHQ/wican-fw#obd).
	#
	# Using the graphical tool (https://github.com/meatpiHQ/wican-fw#2-usb-flash) will probably work just as well. Just populate
	# the first item in the list with 0x0 and /home/.../Downloads/m-wican-factory.bin and leave the rest empty.

	.log
	0
	1
	1234
	12345
	123456
	18Renmeng
	2
	ACrenshaw
	AGorg

	# ------Instructions---------
	# Install (and configure) subfinder, assetfinder, and httprobe
	# go get -v github.com/projectdiscovery/subfinder/cmd/subfinder && go get -v github.com/tomnomnom/httprobe && go get -v github.com/tomnomnom/assetfinder
	# cat firefox.sh >> ~/.bashrc
	# source ~/.bashrc
	# Usage - subf_ff target.tld
	# asset_ff target.tld

	subf_ff () {
	subfinder -d $1 -silent -t 100 \| httprobe -c 50 \| sort -u \| while read line; do firefox $line; sleep 10; done

	#[macro_use]
	extern crate yew;
	extern crate failure;

	use failure::Error;

	use yew::prelude::*;
	use yew::format::Json;
	use yew::services::ConsoleService;
	use yew::services::websocket::{WebSocketService, WebSocketStatus, WebSocketTask};

	module ClickCounter where

	import Prelude
	import Component as C
	import Pux.Html as H
	import Pux.Html.Events as E
	import Data.Generic (class Generic)

	type State = Int