Created
September 4, 2020 09:44
-
-
Save sixtyfive/d31ac64c04189342b6a0263ae85e7f14 to your computer and use it in GitHub Desktop.
Ender 2 Start- and End-G-code for Cura
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| G91 ;Relative positioning | |
| G1 E-60 ;Remove filament from hotend completely | |
| G1 Z5 ;Hover over the print | |
| G90 ;Absolute positioning | |
| G1 X0 Y140 ;Present print | |
| M106 S0 ;Turn off fan | |
| M104 S0 ;Turn off hotend | |
| M140 S0 ;Turn off bed | |
| M84 X Y Z E ;Disable all steppers |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration | |
| M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate | |
| M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration | |
| M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk | |
| M220 S100 ;Reset Feedrate | |
| M221 S100 ;Reset Flowrate | |
| G28 ;Home | |
| G91 ;Relative positioning | |
| G1 E60 ;Bring filament into hot-end | |
| G90 ;Absolute positioning | |
| G92 E0 ;Reset Extruder | |
| G1 Z2.0 F3000 ;Move Z Axis up | |
| G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position | |
| G1 X10.1 Y100.0 Z0.28 F1500.0 E8 ;Draw the first line | |
| G1 X10.4 Y100.0 Z0.28 F5000.0 ;Move to side a little | |
| G1 X10.4 Y20 Z0.28 F1500.0 E15 ;Draw the second line | |
| G92 E0 ;Reset Extruder | |
| G1 Z2.0 F3000 ;Move Z Axis up |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment