maker.build.log

cpanm (App::cpanminus) 1.9018 on perl 5.030000 built for x86_64-linux-thread-multi
Work directory is /tmp/maker-20190704-31506-12qgvg7/maker/.brew_home/.cpanm/work/1562256838.1031
You have make /home/linuxbrew/.linuxbrew/Homebrew/Library/Homebrew/shims/linux/super/make
You have LWP: 6.39
You have /bin/tar: tar (GNU tar) 1.28
Copyright (C) 2014 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Written by John Gilmore and Jay Fenlason.
Searching Bit::Vector () on cpanmetadb ...
--> Working on Bit::Vector
Fetching http://www.cpan.org/authors/id/S/ST/STBEY/Bit-Vector-7.4.tar.gz
-> OK
Unpacking Bit-Vector-7.4.tar.gz
Entering Bit-Vector-7.4
Checking configure dependencies from META.yml
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.34)
Configuring Bit-Vector-7.4
Running Makefile.PL
Warning: prerequisite Carp::Clan 5.3 not found.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Bit::Vector
Writing MYMETA.yml and MYMETA.json
Writing patchlevel.h for /home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl (5.030000)
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.34)
Checking if you have Carp::Clan 5.3 ... No
Checking if you have Storable 2.21 ... Yes (3.15)
==> Found dependencies: Carp::Clan
Searching Carp::Clan (5.3) on cpanmetadb ...
--> Working on Carp::Clan
Fetching http://www.cpan.org/authors/id/E/ET/ETHER/Carp-Clan-6.07.tar.gz
-> OK
Unpacking Carp-Clan-6.07.tar.gz
Entering Carp-Clan-6.07
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.34)
Configuring Carp-Clan-6.07
Running Makefile.PL
Distribution opts in x_use_unsafe_inc: 0
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Carp::Clan
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Test::More 0 ... Yes (1.302162)
Checking if you have overload 0 ... Yes (1.30)
Checking if you have strict 0 ... Yes (1.11)
Checking if you have warnings 0 ... Yes (1.44)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.34)
Checking if you have File::Spec 0 ... Yes (3.78)
Building and testing Carp-Clan-6.07
Distribution opts in x_use_unsafe_inc: 0
cp lib/Carp/Clan.pm blib/lib/Carp/Clan.pm
Manifying 1 pod document
Distribution opts in x_use_unsafe_inc: 0
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# 
# Versions for all modules listed in MYMETA.json (including optional ones):
# 
# === Configure Requires ===
# 
#     Module              Want Have
#     ------------------- ---- ----
#     ExtUtils::MakeMaker  any 7.34
# 
# === Build Requires ===
# 
#     Module              Want Have
#     ------------------- ---- ----
#     ExtUtils::MakeMaker  any 7.34
# 
# === Test Requires ===
# 
#     Module              Want     Have
#     ------------------- ---- --------
#     ExtUtils::MakeMaker  any     7.34
#     File::Spec           any     3.78
#     Test::More           any 1.302162
#     warnings             any     1.44
# 
# === Test Recommends ===
# 
#     Module         Want     Have
#     ---------- -------- --------
#     CPAN::Meta 2.120900 2.150010
# 
# === Runtime Requires ===
# 
#     Module   Want Have
#     -------- ---- ----
#     overload  any 1.30
#     strict    any 1.11
# 
# === Other Modules ===
# 
#     Module             Have
#     --------------- -------
#     Encode             3.01
#     File::Temp       0.2309
#     JSON::PP           4.02
#     Module::Runtime missing
#     Sub::Name       missing
#     YAML            missing
#     autodie            2.29
# 
t/00-report-prereqs.t .. ok
Useless use of single ref constructor in void context at t/10basic.t line 20.
t/10basic.t ............ ok
t/11basic.t ............ ok
t/21pre560.t ........... ok
All tests successful.
Files=4, Tests=116,  1 wallclock secs ( 0.04 usr  0.02 sys +  0.32 cusr  0.07 csys =  0.45 CPU)
Result: PASS
Distribution opts in x_use_unsafe_inc: 0
Manifying 1 pod document
Appending installation info to /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Carp/Clan.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Carp::Clan.3
-> OK
Successfully installed Carp-Clan-6.07
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Carp-Clan-6.07/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Carp-Clan-6.07/MYMETA.json
Building and testing Bit-Vector-7.4
Running Mkbootstrap for Vector ()
chmod 644 "Vector.bs"
cc -c   -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"7.4\" -DXS_VERSION=\"7.4\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"   BitVector.c
cp lib/Bit/Vector/Overload.pod blib/lib/Bit/Vector/Overload.pod
cp lib/Bit/Vector/String.pod blib/lib/Bit/Vector/String.pod
cp Vector.pm blib/lib/Bit/Vector.pm
cp lib/Bit/Vector/Overload.pm blib/lib/Bit/Vector/Overload.pm
cp lib/Bit/Vector/String.pm blib/lib/Bit/Vector/String.pm
cp Vector.pod blib/lib/Bit/Vector.pod
"/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/ExtUtils/xsubpp"  -typemap '/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/ExtUtils/typemap' -typemap '/tmp/maker-20190704-31506-12qgvg7/maker/.brew_home/.cpanm/work/1562256838.1031/Bit-Vector-7.4/typemap'  Vector.xs > Vector.xsc
mv Vector.xsc Vector.c
"/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Vector.bs blib/arch/auto/Bit/Vector/Vector.bs 644
cc -c   -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"7.4\" -DXS_VERSION=\"7.4\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"   Vector.c
rm -f blib/arch/auto/Bit/Vector/Vector.so
cc  -shared -O2 -L/usr/local/lib -fstack-protector-strong  BitVector.o Vector.o  -o blib/arch/auto/Bit/Vector/Vector.so  \
      \
  
chmod 755 blib/arch/auto/Bit/Vector/Vector.so
Manifying 3 pod documents
"/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Vector.bs blib/arch/auto/Bit/Vector/Vector.bs 644
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_____version.t .. ok
t/01_________new.t .. ok
t/02_____destroy.t .. ok
t/03__operations.t .. ok
t/04___functions.t .. ok
t/05______primes.t .. ok
t/06______subset.t .. ok
t/07_____compare.t .. ok
t/08______resize.t .. ok
t/09__parameters.t .. ok
t/10___intervals.t .. ok
t/11_______shift.t .. ok
t/12______string.t .. ok
t/13___increment.t .. ok
t/14_______empty.t .. ok
t/15_________add.t .. ok
t/16____subtract.t .. ok
t/17_________gcd.t .. ok
t/28___chunklist.t .. ok
t/30__overloaded.t .. ok
t/40___auxiliary.t .. ok
t/50_freeze_thaw.t .. ok
t/51_file_nstore.t .. ok
All tests successful.
Files=23, Tests=91963,  4 wallclock secs ( 3.65 usr  0.18 sys +  0.78 cusr  0.24 csys =  4.85 CPU)
Result: PASS
"/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Vector.bs blib/arch/auto/Bit/Vector/Vector.bs 644
Manifying 3 pod documents
Appending installation info to /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/auto/Bit/Vector/Vector.so
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/Bit/Vector.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/Bit/Vector.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/Bit/Vector/Overload.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/Bit/Vector/String.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/Bit/Vector/Overload.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/Bit/Vector/String.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Bit::Vector.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Bit::Vector::Overload.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Bit::Vector::String.3
-> OK
Successfully installed Bit-Vector-7.4
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Bit-Vector-7.4/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Bit-Vector-7.4/MYMETA.json
Searching DBD::SQLite () on cpanmetadb ...
--> Working on DBD::SQLite
Fetching http://www.cpan.org/authors/id/I/IS/ISHIGAKI/DBD-SQLite-1.62.tar.gz
-> OK
Unpacking DBD-SQLite-1.62.tar.gz
Entering DBD-SQLite-1.62
Checking configure dependencies from META.json
Checking if you have File::Spec 0.82 ... Yes (3.78)
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.34)
Checking if you have DBI 1.57 ... Yes (1.642)
Configuring DBD-SQLite-1.62
Running Makefile.PL
DBI.c: loadable library and perl binaries are mismatched (got handshake key 0xce00080, needed 0xcd00080)
-> N/A
-> FAIL No MYMETA file is found after configure. Your toolchain is too old?
-> FAIL Configure failed for DBD-SQLite-1.62. See /tmp/maker-20190704-31506-12qgvg7/maker/.brew_home/.cpanm/work/1562256838.1031/build.log for details.
Searching Inline::C () on cpanmetadb ...
--> Working on Inline::C
Fetching http://www.cpan.org/authors/id/T/TI/TINITA/Inline-C-0.81.tar.gz
-> OK
Unpacking Inline-C-0.81.tar.gz
Entering Inline-C-0.81
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.34)
Checking if you have File::ShareDir::Install 0.06 ... No
==> Found dependencies: File::ShareDir::Install
Searching File::ShareDir::Install (0.06) on cpanmetadb ...
--> Working on File::ShareDir::Install
Fetching http://www.cpan.org/authors/id/E/ET/ETHER/File-ShareDir-Install-0.13.tar.gz
-> OK
Unpacking File-ShareDir-Install-0.13.tar.gz
Entering File-ShareDir-Install-0.13
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.34)
Configuring File-ShareDir-Install-0.13
Running Makefile.PL
Distribution opts in x_use_unsafe_inc: 0
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for File::ShareDir::Install
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have File::Path 0 ... Yes (2.16)
Checking if you have IO::Dir 0 ... Yes (1.40)
Checking if you have warnings 0 ... Yes (1.44)
Checking if you have Exporter 0 ... Yes (5.73)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.34)
Checking if you have strict 0 ... Yes (1.11)
Checking if you have Test::More 0 ... Yes (1.302162)
Checking if you have Carp 0 ... Yes (1.50)
Checking if you have File::Spec 0 ... Yes (3.78)
Building and testing File-ShareDir-Install-0.13
Distribution opts in x_use_unsafe_inc: 0
cp lib/File/ShareDir/Install.pm blib/lib/File/ShareDir/Install.pm
Manifying 1 pod document
Distribution opts in x_use_unsafe_inc: 0
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/10_makefile.t ........ ok
t/11_dotfile.t ......... ok
t/12_delete.t .......... ok
# 
# Versions for all modules listed in MYMETA.json (including optional ones):
# 
# === Configure Requires ===
# 
#     Module              Want Have
#     ------------------- ---- ----
#     ExtUtils::MakeMaker  any 7.34
# 
# === Build Requires ===
# 
#     Module              Want Have
#     ------------------- ---- ----
#     ExtUtils::MakeMaker  any 7.34
# 
# === Test Requires ===
# 
#     Module              Want     Have
#     ------------------- ---- --------
#     ExtUtils::MakeMaker  any     7.34
#     File::Path           any     2.16
#     File::Spec           any     3.78
#     Test::More           any 1.302162
# 
# === Test Recommends ===
# 
#     Module         Want     Have
#     ---------- -------- --------
#     CPAN::Meta 2.120900 2.150010
# 
# === Runtime Requires ===
# 
#     Module     Want Have
#     ---------- ---- ----
#     Carp        any 1.50
#     Exporter    any 5.73
#     File::Spec  any 3.78
#     IO::Dir     any 1.40
#     strict      any 1.11
#     warnings    any 1.44
# 
# === Other Modules ===
# 
#     Module           Have
#     ------------- -------
#     Encode           3.01
#     JSON::PP         4.02
#     Pod::Coverage missing
#     Sub::Name     missing
#     YAML          missing
#     autodie          2.29
# 
t/00-report-prereqs.t .. ok
All tests successful.
Files=4, Tests=39,  3 wallclock secs ( 0.05 usr  0.03 sys +  2.18 cusr  0.81 csys =  3.07 CPU)
Result: PASS
Distribution opts in x_use_unsafe_inc: 0
Manifying 1 pod document
Appending installation info to /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/File/ShareDir/Install.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/File::ShareDir::Install.3
-> OK
Successfully installed File-ShareDir-Install-0.13
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/File-ShareDir-Install-0.13/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/File-ShareDir-Install-0.13/MYMETA.json
Configuring Inline-C-0.81
Running Makefile.PL
Warning: prerequisite File::Copy::Recursive 0 not found.
Warning: prerequisite Inline 0.83 not found.
Warning: prerequisite Parse::RecDescent 1.967009 not found.
Warning: prerequisite Pegex 0.66 not found.
Warning: prerequisite YAML::XS 0 not found.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Inline::C
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Pegex 0.66 ... No
Checking if you have File::Copy::Recursive 0 ... No
Checking if you have File::Path 0 ... Yes (2.16)
Checking if you have YAML::XS 0 ... No
Checking if you have Parse::RecDescent 1.967009 ... No
Checking if you have ExtUtils::MakeMaker 7.00 ... Yes (7.34)
Checking if you have Test::More 0.88 ... Yes (1.302162)
Checking if you have version 0.77 ... Yes (0.9924)
Checking if you have File::Spec 0.8 ... Yes (3.78)
Checking if you have Test::Warn 0.23 ... Yes (0.36)
Checking if you have Inline 0.83 ... No
Checking if you have autodie 0 ... Yes (2.29)
==> Found dependencies: Pegex, File::Copy::Recursive, YAML::XS, Parse::RecDescent, Inline
Searching Pegex (0.66) on cpanmetadb ...
--> Working on Pegex
Fetching http://www.cpan.org/authors/id/I/IN/INGY/Pegex-0.70.tar.gz
-> OK
Unpacking Pegex-0.70.tar.gz
Entering Pegex-0.70
Checking configure dependencies from META.json
Checking if you have File::ShareDir::Install 0.06 ... Yes (0.13)
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.34)
Configuring Pegex-0.70
Running Makefile.PL
Warning: prerequisite YAML::XS 0.74 not found.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Pegex
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have JSON::PP 0 ... Yes (4.02)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.34)
Checking if you have YAML::XS 0.74 ... No
Checking if you have Scalar::Util 0 ... Yes (1.50)
==> Found dependencies: YAML::XS
Searching YAML::XS (0.74) on cpanmetadb ...
--> Working on YAML::XS
Fetching http://www.cpan.org/authors/id/T/TI/TINITA/YAML-LibYAML-0.79.tar.gz
-> OK
Unpacking YAML-LibYAML-0.79.tar.gz
Entering YAML-LibYAML-0.79
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.34)
Configuring YAML-LibYAML-0.79
Running Makefile.PL
Checking if your kit is complete...
Looks good
Writing MYMETA.yml and MYMETA.json
Generating a Unix-style Makefile
Writing Makefile for YAML::LibYAML
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.34)
Checking if you have Test::More 0.88 ... Yes (1.302162)
Building and testing YAML-LibYAML-0.79
cp lib/YAML/XS.pm blib/lib/YAML/XS.pm
cp lib/YAML/XS.pod blib/lib/YAML/XS.pod
cp lib/YAML/LibYAML.pod blib/lib/YAML/LibYAML.pod
cp lib/YAML/LibYAML.pm blib/lib/YAML/LibYAML.pm
make[1]: Entering directory '/tmp/maker-20190704-31506-12qgvg7/maker/.brew_home/.cpanm/work/1562256838.1031/YAML-LibYAML-0.79/LibYAML'
Running Mkbootstrap for LibYAML ()
chmod 644 "LibYAML.bs"
cp lib/YAML/XS/LibYAML.pm ../blib/lib/YAML/XS/LibYAML.pm
cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"  -DHAVE_CONFIG_H api.c
cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"  -DHAVE_CONFIG_H dumper.c
cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"  -DHAVE_CONFIG_H emitter.c
cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"  -DHAVE_CONFIG_H loader.c
cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"  -DHAVE_CONFIG_H parser.c
cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"  -DHAVE_CONFIG_H perl_libyaml.c
cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"  -DHAVE_CONFIG_H reader.c
cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"  -DHAVE_CONFIG_H scanner.c
cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"  -DHAVE_CONFIG_H writer.c
"/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/ExtUtils/xsubpp"  -typemap '/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/ExtUtils/typemap'  LibYAML.xs > LibYAML.xsc
mv LibYAML.xsc LibYAML.c
"/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- LibYAML.bs ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.bs 644
cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/home/linuxbrew/.linuxbrew/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/lib/perl5/5.30.0/x86_64-linux-thread-multi/CORE"  -DHAVE_CONFIG_H LibYAML.c
rm -f ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.so
cc  -shared -O2 -L/usr/local/lib -fstack-protector-strong  api.o dumper.o emitter.o loader.o parser.o perl_libyaml.o reader.o scanner.o writer.o LibYAML.o  -o ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.so  \
      \
  
chmod 755 ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.so
Manifying 1 pod document
make[1]: Leaving directory '/tmp/maker-20190704-31506-12qgvg7/maker/.brew_home/.cpanm/work/1562256838.1031/YAML-LibYAML-0.79/LibYAML'
Manifying 2 pod documents
make[1]: Entering directory '/tmp/maker-20190704-31506-12qgvg7/maker/.brew_home/.cpanm/work/1562256838.1031/YAML-LibYAML-0.79/LibYAML'
"/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- LibYAML.bs ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.bs 644
Manifying 1 pod document
make[1]: Leaving directory '/tmp/maker-20190704-31506-12qgvg7/maker/.brew_home/.cpanm/work/1562256838.1031/YAML-LibYAML-0.79/LibYAML'
make[1]: Entering directory '/tmp/maker-20190704-31506-12qgvg7/maker/.brew_home/.cpanm/work/1562256838.1031/YAML-LibYAML-0.79/LibYAML'
"/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- LibYAML.bs ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.bs 644
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-I../blib/lib" "-I../blib/arch" test.pl
1..1
ok 1 - Tests for libyaml extension are all defined at the top level
make[1]: Leaving directory '/tmp/maker-20190704-31506-12qgvg7/maker/.brew_home/.cpanm/work/1562256838.1031/YAML-LibYAML-0.79/LibYAML'
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t .. ok
t/alias.t ................ ok
t/api.t .................. ok
t/ascii.t ................ ok
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
t/binary.t ............... ok
t/blessed.t .............. ok
t/boolean-boolean.t ...... skipped: boolean not installed
t/boolean-invalid.t ...... ok
t/boolean-jsonpp.t ....... ok
t/boolean.t .............. ok
t/bug-pvf.t .............. ok
t/bug-stack.t ............ ok
t/code.t ................. ok
t/dump-heuristics.t ...... ok
t/dump-int.t ............. ok
t/dump.t ................. ok
t/empty.t ................ ok
t/error.t ................ ok
t/file.t ................. ok
t/glob.t ................. ok
t/indent.t ............... ok
t/io-handle.t ............ ok
t/leak.t ................. ok
# libyaml version = 0.2.2
t/libyaml-version.t ...... ok
t/load-blessed.t ......... ok
t/load.t ................. ok
t/load_standard_tags.t ... ok
t/loadfile-empty.t ....... ok
t/long_plain_wrap.t ...... skipped: Failing test. Not yet implemented
t/magic.t ................ ok
t/native.t ............... ok
t/null.t ................. ok
t/numbers.t .............. ok
t/path-class.t ........... ok
t/pl_sv_undef.t .......... ok
t/private.t .............. ok
t/quote.t ................ ok
t/ref-scalar.t ........... ok
t/regexp.t ............... ok
t/string_nulls.t ......... ok
t/tags.t ................. ok
t/tied.t ................. ok
t/utf8.t ................. ok
All tests successful.
Files=44, Tests=356,  6 wallclock secs ( 0.23 usr  0.24 sys +  4.42 cusr  1.04 csys =  5.93 CPU)
Result: PASS
make[1]: Entering directory '/tmp/maker-20190704-31506-12qgvg7/maker/.brew_home/.cpanm/work/1562256838.1031/YAML-LibYAML-0.79/LibYAML'
"/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- LibYAML.bs ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.bs 644
Manifying 1 pod document
make[1]: Leaving directory '/tmp/maker-20190704-31506-12qgvg7/maker/.brew_home/.cpanm/work/1562256838.1031/YAML-LibYAML-0.79/LibYAML'
Manifying 2 pod documents
Appending installation info to /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/auto/YAML/XS/LibYAML/LibYAML.so
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/YAML/XS.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/YAML/XS.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/YAML/LibYAML.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/YAML/LibYAML.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/YAML/XS/LibYAML.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/YAML::XS::LibYAML.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/YAML::LibYAML.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/YAML::XS.3
-> OK
Successfully installed YAML-LibYAML-0.79
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/YAML-LibYAML-0.79/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/YAML-LibYAML-0.79/MYMETA.json
Building and testing Pegex-0.70
cp lib/Pegex/Grammar/Atoms.pod blib/lib/Pegex/Grammar/Atoms.pod
cp lib/Pegex/Tree/Wrap.pm blib/lib/Pegex/Tree/Wrap.pm
cp lib/Pegex/Tutorial/Calculator.pod blib/lib/Pegex/Tutorial/Calculator.pod
cp lib/Pegex/Bootstrap.pm blib/lib/Pegex/Bootstrap.pm
cp lib/Pegex/Optimizer.pm blib/lib/Pegex/Optimizer.pm
cp lib/Pegex/Input.pm blib/lib/Pegex/Input.pm
cp lib/Pegex/API.pod blib/lib/Pegex/API.pod
cp lib/Pegex/Module.pm blib/lib/Pegex/Module.pm
cp lib/Pegex/Bootstrap.pod blib/lib/Pegex/Bootstrap.pod
cp lib/Pegex/Grammar/Atoms.pm blib/lib/Pegex/Grammar/Atoms.pm
cp lib/Pegex/Pegex/Grammar.pm blib/lib/Pegex/Pegex/Grammar.pm
cp lib/Pegex/Tutorial.pod blib/lib/Pegex/Tutorial.pod
cp lib/Pegex/Regex.pod blib/lib/Pegex/Regex.pod
cp lib/Pegex.pm blib/lib/Pegex.pm
cp lib/Pegex/Tree/Wrap.pod blib/lib/Pegex/Tree/Wrap.pod
cp lib/Pegex/Parser.pm blib/lib/Pegex/Parser.pm
cp lib/Pegex/Tree.pod blib/lib/Pegex/Tree.pod
cp lib/Pegex/Pegex/Grammar.pod blib/lib/Pegex/Pegex/Grammar.pod
cp lib/Pegex/Pegex/AST.pm blib/lib/Pegex/Pegex/AST.pm
cp lib/Pegex/Grammar.pod blib/lib/Pegex/Grammar.pod
cp lib/Pegex/Miscellany.pod blib/lib/Pegex/Miscellany.pod
cp lib/Pegex/Overview.pod blib/lib/Pegex/Overview.pod
cp lib/Pegex/Compiler.pm blib/lib/Pegex/Compiler.pm
cp lib/Pegex/Compiler.pod blib/lib/Pegex/Compiler.pod
cp lib/Pegex/Receiver.pm blib/lib/Pegex/Receiver.pm
cp lib/Pegex/Receiver.pod blib/lib/Pegex/Receiver.pod
cp lib/Pegex/Parser/Indent.pm blib/lib/Pegex/Parser/Indent.pm
cp lib/Pegex/Grammar.pm blib/lib/Pegex/Grammar.pm
cp lib/Pegex/Input.pod blib/lib/Pegex/Input.pod
cp lib/Pegex/Tree.pm blib/lib/Pegex/Tree.pm
cp lib/Pegex/Resources.pod blib/lib/Pegex/Resources.pod
cp lib/Pegex/Module.pod blib/lib/Pegex/Module.pod
cp lib/Pegex/Base.pm blib/lib/Pegex/Base.pm
cp lib/Pegex.pod blib/lib/Pegex.pod
cp lib/Pegex/Syntax.pod blib/lib/Pegex/Syntax.pod
cp lib/Pegex/Tutorial/JSON.pod blib/lib/Pegex/Tutorial/JSON.pod
cp lib/Pegex/Parser.pod blib/lib/Pegex/Parser.pod
cp lib/Pegex/Regex.pm blib/lib/Pegex/Regex.pm
cp share/pegex.pgx blib/lib/auto/share/dist/Pegex/pegex.pgx
Manifying 21 pod documents
Skip blib/lib/auto/share/dist/Pegex/pegex.pgx (unchanged)
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-compile-modules.t ... ok
t/api.t ................... ok
t/author-pod-syntax.t ..... skipped: these tests are for testing by the author
t/compiler-checks.t ....... ok
t/compiler-equivalence.t .. ok
t/compiler-perl.t ......... ok
t/compiler.t .............. ok
t/error.t ................. ok
t/export-api.t ............ ok
t/flatten.t ............... ok
t/function-rule.t ......... ok
t/grammar-api.t ........... ok
t/look-behind.t ........... ok
t/optimize.t .............. ok
t/parse.t ................. ok
t/repeat.t ................ ok
Use of uninitialized value $ENV{"TRAVIS"} in string eq at t/safe.t line 8.
t/safe.t .................. ok
try_contact                    >Name: Ingy Net\nPhone: 919-876-...<
 try_name_section               >Name: Ingy Net\nPhone: 919-876-...<
  try_name                       >Ingy Net\nPhone: 919-876-5432\nA...<
  got_name             
  try_EOL                        >\nPhone: 919-876-5432\nAddress:\n...<
  got_EOL              
 got_name_section     
 try_phone_section              >Phone: 919-876-5432\nAddress:\n ...<
  try_phone_number               >919-876-5432\nAddress:\n  1234 M...<
   try_term                       >919-876-5432\nAddress:\n  1234 M...<
   got_term             
  got_phone_number     
  try_EOL                        >\nAddress:\n  1234 Main St\n  Nic...<
  got_EOL              
 got_phone_section    
 try_address_section            >Address:\n  1234 Main St\n  Nice...<
  try_street_line                >  1234 Main St\n  Niceville\n  O...<
   try_indent                     >  1234 Main St\n  Niceville\n  O...<
   got_indent           
   try_street                     >1234 Main St\n  Niceville\n  OK\n<
   got_street           
   try_EOL                        >\n  Niceville\n  OK\n<
   got_EOL              
  got_street_line      
  try_city_line                  >  Niceville\n  OK\n<
   try_indent                     >  Niceville\n  OK\n<
   got_indent           
   try_city                       >Niceville\n  OK\n<
    try_term                       >Niceville\n  OK\n<
    got_term             
   got_city             
   try_EOL                        >\n  OK\n<
   got_EOL              
  got_city_line        
  try_country_line               >  OK\n<
   try_indent                     >  OK\n<
   got_indent           
   try_country                    >OK\n<
    try_term                       >OK\n<
    got_term             
   got_country          
   try_EOL                        >\n<
   got_EOL              
  got_country_line     
 got_address_section  
got_contact          
t/sample.t ................ ok
t/tree-pegex.t ............ ok
t/tree.t .................. ok
All tests successful.
Files=20, Tests=267,  3 wallclock secs ( 0.13 usr  0.10 sys +  1.98 cusr  0.44 csys =  2.65 CPU)
Result: PASS
Skip blib/lib/auto/share/dist/Pegex/pegex.pgx (unchanged)
Manifying 21 pod documents
Appending installation info to /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/auto/share/dist/Pegex/pegex.pgx
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Bootstrap.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Optimizer.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Input.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/API.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Module.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Bootstrap.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Tutorial.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Regex.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Parser.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Tree.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Grammar.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Miscellany.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Overview.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Compiler.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Compiler.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Receiver.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Receiver.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Grammar.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Input.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Tree.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Resources.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Module.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Base.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Syntax.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Parser.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Regex.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Grammar/Atoms.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Grammar/Atoms.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Tree/Wrap.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Tree/Wrap.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Tutorial/Calculator.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Tutorial/JSON.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Pegex/Grammar.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Pegex/Grammar.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Pegex/AST.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Pegex/Parser/Indent.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::API.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Bootstrap.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Compiler.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Grammar.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Grammar::Atoms.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Input.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Miscellany.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Module.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Overview.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Parser.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Pegex::Grammar.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Receiver.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Regex.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Resources.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Syntax.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Tree.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Tree::Wrap.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Tutorial.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Tutorial::Calculator.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Pegex::Tutorial::JSON.3
-> OK
Successfully installed Pegex-0.70
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Pegex-0.70/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Pegex-0.70/MYMETA.json
Searching File::Copy::Recursive (0) on cpanmetadb ...
--> Working on File::Copy::Recursive
Fetching http://www.cpan.org/authors/id/D/DM/DMUEY/File-Copy-Recursive-0.44.tar.gz
-> OK
Unpacking File-Copy-Recursive-0.44.tar.gz
Entering File-Copy-Recursive-0.44
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.34)
Configuring File-Copy-Recursive-0.44
Running Makefile.PL
Warning: prerequisite Path::Tiny 0 not found.
Warning: prerequisite Test::File 0 not found.
Warning: prerequisite Test::Warnings 0 not found.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for File::Copy::Recursive
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have File::Copy 0 ... Yes (2.34)
Checking if you have Path::Tiny 0 ... No
Checking if you have Test::More 0.88 ... Yes (1.302162)
Checking if you have File::Spec 0 ... Yes (3.78)
Checking if you have Test::Warnings 0 ... No
Checking if you have File::Glob 0 ... Yes (1.32)
Checking if you have Test::File 0 ... No
Checking if you have Test::Deep 0 ... Yes (1.128)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.34)
Checking if you have Test::Fatal 0 ... Yes (0.014)
Checking if you have File::Temp 0 ... Yes (0.2309)
Checking if you have Cwd 0 ... Yes (3.78)
==> Found dependencies: Path::Tiny, Test::Warnings, Test::File
Searching Path::Tiny (0) on cpanmetadb ...
--> Working on Path::Tiny
Fetching http://www.cpan.org/authors/id/D/DA/DAGOLDEN/Path-Tiny-0.108.tar.gz
-> OK
Unpacking Path-Tiny-0.108.tar.gz
Entering Path-Tiny-0.108
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.34)
Configuring Path-Tiny-0.108
Running Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Path::Tiny
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Cwd 0 ... Yes (3.78)
Checking if you have warnings::register 0 ... Yes (1.04)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.34)
Checking if you have File::Path 2.07 ... Yes (2.16)
Checking if you have File::Spec 0.86 ... Yes (3.78)
Checking if you have File::stat 0 ... Yes (1.08)
Checking if you have File::Copy 0 ... Yes (2.34)
Checking if you have File::Temp 0.19 ... Yes (0.2309)
Checking if you have Digest::SHA 5.45 ... Yes (6.02)
Checking if you have warnings 0 ... Yes (1.44)
Checking if you have File::Spec::Unix 0 ... Yes (3.78)
Checking if you have File::Basename 0 ... Yes (2.85)
Checking if you have File::Glob 0 ... Yes (1.32)
Checking if you have Digest 1.03 ... Yes (1.17_01)
Checking if you have Encode 0 ... Yes (3.01)
Checking if you have Test::More 0.96 ... Yes (1.302162)
Checking if you have Digest::MD5 0 ... Yes (2.55)
Checking if you have Carp 0 ... Yes (1.50)
Checking if you have Fcntl 0 ... Yes (1.13)
Checking if you have Exporter 5.57 ... Yes (5.73)
Checking if you have File::Spec::Functions 0 ... Yes (3.78)
Checking if you have overload 0 ... Yes (1.30)
Checking if you have constant 0 ... Yes (1.33)
Checking if you have lib 0 ... Yes (0.65)
Checking if you have strict 0 ... Yes (1.11)
Checking if you have open 0 ... Yes (1.11)
Building and testing Path-Tiny-0.108
cp lib/Path/Tiny.pm blib/lib/Path/Tiny.pm
Manifying 1 pod document
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# 
# Versions for all modules listed in MYMETA.json (including optional ones):
# 
# === Configure Requires ===
# 
#     Module              Want Have
#     ------------------- ---- ----
#     ExtUtils::MakeMaker 6.17 7.34
# 
# === Configure Suggests ===
# 
#     Module      Want Have
#     -------- ------- ----
#     JSON::PP 2.27300 4.02
# 
# === Build Requires ===
# 
#     Module              Want Have
#     ------------------- ---- ----
#     ExtUtils::MakeMaker  any 7.34
# 
# === Test Requires ===
# 
#     Module                Want     Have
#     --------------------- ---- --------
#     Digest::MD5            any     2.55
#     ExtUtils::MakeMaker    any     7.34
#     File::Basename         any     2.85
#     File::Spec            0.86     3.78
#     File::Spec::Functions  any     3.78
#     File::Spec::Unix       any     3.78
#     File::Temp            0.19   0.2309
#     Test::More            0.96 1.302162
#     lib                    any     0.65
#     open                   any     1.11
# 
# === Test Recommends ===
# 
#     Module                 Want     Have
#     ------------------ -------- --------
#     CPAN::Meta         2.120900 2.150010
#     Test::FailWarnings      any  missing
#     Test::MockRandom        any  missing
# 
# === Runtime Requires ===
# 
#     Module             Want    Have
#     ------------------ ---- -------
#     Carp                any    1.50
#     Cwd                 any    3.78
#     Digest             1.03 1.17_01
#     Digest::SHA        5.45    6.02
#     Encode              any    3.01
#     Exporter           5.57    5.73
#     Fcntl               any    1.13
#     File::Copy          any    2.34
#     File::Glob          any    1.32
#     File::Path         2.07    2.16
#     File::Spec         0.86    3.78
#     File::Temp         0.19  0.2309
#     File::stat          any    1.08
#     constant            any    1.33
#     overload            any    1.30
#     strict              any    1.11
#     warnings            any    1.44
#     warnings::register  any    1.04
# 
# === Runtime Recommends ===
# 
#     Module        Want    Have
#     ------------- ---- -------
#     Unicode::UTF8 0.58 missing
# 
t/00-report-prereqs.t ............. ok
t/basename.t ...................... ok
t/basic.t ......................... ok
t/children.t ...................... ok
t/chmod.t ......................... ok
t/digest.t ........................ ok
t/exception.t ..................... ok
t/exports.t ....................... ok
t/filesystem.t .................... ok
t/input_output.t .................. ok
t/input_output_no_PU_UU.t ......... ok
t/input_output_no_UU.t ............ ok
t/locking.t ....................... ok
t/mkpath.t ........................ ok
t/mutable_tree_while_iterating.t .. ok
t/normalize.t ..................... ok
t/overloading.t ................... ok
t/parent.t ........................ ok
t/recurse.t ....................... ok
t/rel-abs.t ....................... ok
t/sig_die.t ....................... ok
t/subsumes.t ...................... ok
t/symlinks.t ...................... ok
t/temp.t .......................... ok
t/visit.t ......................... ok
t/zz-atomic.t ..................... skipped: Test::MockRandom required for atomicity tests
t/zzz-spec.t ...................... ok
All tests successful.
Files=27, Tests=1704,  5 wallclock secs ( 0.35 usr  0.14 sys +  3.52 cusr  0.81 csys =  4.82 CPU)
Result: PASS
Manifying 1 pod document
Appending installation info to /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Path/Tiny.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Path::Tiny.3
-> OK
Successfully installed Path-Tiny-0.108
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Path-Tiny-0.108/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Path-Tiny-0.108/MYMETA.json
Searching Test::Warnings (0) on cpanmetadb ...
--> Working on Test::Warnings
Fetching http://www.cpan.org/authors/id/E/ET/ETHER/Test-Warnings-0.026.tar.gz
-> OK
Unpacking Test-Warnings-0.026.tar.gz
Entering Test-Warnings-0.026
Checking configure dependencies from META.json
Configuring Test-Warnings-0.026
Distribution opts in x_static_install: 1
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Test::Builder 0 ... Yes (1.302162)
Checking if you have strict 0 ... Yes (1.11)
Checking if you have Exporter 0 ... Yes (5.73)
Checking if you have File::Spec 0 ... Yes (3.78)
Checking if you have Test::More 0.94 ... Yes (1.302162)
Checking if you have Carp 0 ... Yes (1.50)
Checking if you have warnings 0 ... Yes (1.44)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.34)
Checking if you have TAP::Harness::Env 0 ... Yes (3.42)
Checking if you have parent 0 ... Yes (0.237)
Checking if you have if 0 ... Yes (0.0608)
Building and testing Test-Warnings-0.026
cp lib/Test/Warnings.pm blib/lib/Test/Warnings.pm
# 
# Versions for all modules listed in MYMETA.json (including optional ones):
# 
# === Configure Requires ===
# 
#     Module              Want Have
#     ------------------- ---- ----
#     ExtUtils::MakeMaker  any 7.34
# 
# === Test Requires ===
# 
#     Module              Want     Have
#     ------------------- ---- --------
#     ExtUtils::MakeMaker  any     7.34
#     File::Spec           any     3.78
#     Test::More          0.94 1.302162
#     if                   any   0.0608
# 
# === Test Recommends ===
# 
#     Module           Want     Have
#     ------------ -------- --------
#     CPAN::Meta   2.120900 2.150010
#     Test::Tester    0.108 1.302162
# 
# === Test Suggests ===
# 
#     Module                    Want    Have
#     ------------------------ ----- -------
#     CPAN::Meta::Check        0.011 missing
#     CPAN::Meta::Requirements   any   2.140
# 
# === Runtime Requires ===
# 
#     Module        Want     Have
#     ------------- ---- --------
#     Carp           any     1.50
#     Exporter       any     5.73
#     Test::Builder  any 1.302162
#     parent         any    0.237
#     strict         any     1.11
#     warnings       any     1.44
# 
t/00-report-prereqs.t ................. ok
t/01-basic.t .......................... ok
t/02-done_testing.t ................... ok
t/03-subtest.t ........................ ok
t/04-no-tests.t ....................... ok
t/05-no-end-block.t ................... ok
t/06-skip-all.t ....................... skipped: Need Foo::Bar::Baz to continue!
t/07-no_plan.t ........................ ok
t/08-use-if.t ......................... ok
t/09-warnings-contents.t .............. ok
t/10-no-done_testing.t ................ ok
t/11-double-use.t ..................... ok
t/12-no-newline.t ..................... ok
t/13-propagate-warnings.t ............. ok
t/14-propagate-subname.t .............. ok
t/15-propagate-default.t .............. ok
t/16-propagate-ignore.t ............... ok
t/17-propagate-subname-colons.t ....... ok
t/18-propagate-subname-package.t ...... ok
t/19-propagate-nonexistent-subname.t .. ok
t/20-propagate-stub.t ................. ok
t/zzz-check-breaks.t .................. ok
All tests successful.
Files=22, Tests=65,  2 wallclock secs ( 0.14 usr  0.31 sys +  1.73 cusr  0.45 csys =  2.63 CPU)
Result: PASS
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Test/Warnings.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Test::Warnings.3
-> OK
Successfully installed Test-Warnings-0.026
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Test-Warnings-0.026/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Test-Warnings-0.026/MYMETA.json
Searching Test::File (0) on cpanmetadb ...
--> Working on Test::File
Fetching http://www.cpan.org/authors/id/B/BD/BDFOY/Test-File-1.443.tar.gz
-> OK
Unpacking Test-File-1.443.tar.gz
Entering Test-File-1.443
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.64 ... Yes (7.34)
Checking if you have File::Spec::Functions 0 ... Yes (3.78)
Configuring Test-File-1.443
Running Makefile.PL
Warning: prerequisite Test::utf8 0 not found.
WARNING: Older versions of ExtUtils::MakeMaker may errantly install README.pod as part of this distribution. It is recommended to avoid using this path in CPAN modules.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Test::File
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Test::utf8 0 ... No
Checking if you have Test::More 0.95 ... Yes (1.302162)
Checking if you have Test::Builder 1.001006 ... Yes (1.302162)
Checking if you have Test::Builder::Tester 1.04 ... Yes (1.302162)
==> Found dependencies: Test::utf8
Searching Test::utf8 (0) on cpanmetadb ...
--> Working on Test::utf8
Fetching http://www.cpan.org/authors/id/M/MA/MARKF/Test-utf8-1.01.tar.gz
-> OK
Unpacking Test-utf8-1.01.tar.gz
Entering Test-utf8-1.01
Checking configure dependencies from META.yml
Checking if you have ExtUtils::MakeMaker 6.59 ... Yes (7.34)
Configuring Test-utf8-1.01
Running Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Test::utf8
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Test::Builder::Tester 0.09 ... Yes (1.302162)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.34)
Checking if you have Test::Builder 0 ... Yes (1.302162)
Building and testing Test-utf8-1.01
cp lib/Test/utf8.pm blib/lib/Test/utf8.pm
Manifying 1 pod document
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/01basic.t ....... ok
t/02invalid.t ..... ok
t/03deu.t ......... ok
t/04ascii.t ....... ok
t/05latin1.t ...... ok
t/06flag.t ........ ok
t/07valid_docu.t .. ok
All tests successful.
Files=7, Tests=44,  1 wallclock secs ( 0.06 usr  0.04 sys +  0.68 cusr  0.17 csys =  0.95 CPU)
Result: PASS
Manifying 1 pod document
Appending installation info to /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Test/utf8.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Test::utf8.3
-> OK
Successfully installed Test-utf8-1.01
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Test-utf8-1.01/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Test-utf8-1.01/MYMETA.json
Building and testing Test-File-1.443
cp lib/Test/File.pm blib/lib/Test/File.pm
Manifying 1 pod document
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
    # MSWin32
    # Looks like you planned 0 tests but ran 2.
    # Looks like you planned 0 tests but ran 2.
t/dm_skeleton.t ............... ok
t/file_contains.t ............. ok
t/file_contains_encoded.t ..... ok
t/file_contains_utf8.t ........ ok
t/file_mtime.t ................ ok
    # Looks like you planned 0 tests but ran 5.
    # Looks like you planned 0 tests but ran 7.
    # Looks like you planned 0 tests but ran 6.
t/file_sizes.t ................ ok
    # Looks like you planned 0 tests but ran 5.
    # Looks like you planned 0 tests but ran 6.
    # Looks like you planned 0 tests but ran 4.
    # Looks like you planned 0 tests but ran 4.
t/line_counters.t ............. ok
    # Looks like you planned 0 tests but ran 2.
    # Looks like you planned 0 tests but ran 3.
t/link_counts.t ............... ok
    # Looks like you planned 0 tests but ran 8.
    # Looks like you planned 0 tests but ran 12.
    # Looks like you planned 0 tests but ran 7.
    # Looks like you planned 0 tests but ran 2.
    # Looks like you planned 0 tests but ran 1.
    # Looks like you planned 0 tests but ran 1.
t/links.t ..................... ok
t/load.t ...................... ok
t/normalize.t ................. ok
t/obviously_non_multi_user.t .. ok
t/owner.t ..................... ok
t/pod.t ....................... skipped: Test::Pod 1.00 required for testing POD
t/pod_coverage.t .............. skipped: Test::Pod::Coverage required for testing POD
t/test_dirs.t ................. ok
t/test_files.t ................ ok
    # Looks like you planned 0 tests but ran 4.
t/win32.t ..................... ok
All tests successful.
Files=18, Tests=189,  3 wallclock secs ( 0.12 usr  0.10 sys +  1.81 cusr  0.45 csys =  2.48 CPU)
Result: PASS
Manifying 1 pod document
Appending installation info to /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Test/File.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Test::File.3
-> OK
Successfully installed Test-File-1.443
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Test-File-1.443/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Test-File-1.443/MYMETA.json
Building and testing File-Copy-Recursive-0.44
cp lib/File/Copy/Recursive.pm blib/lib/File/Copy/Recursive.pm
Manifying 1 pod document
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00.load.t ............... ok
t/01.legacy.t ............. ok
t/02.legacy-symtogsafe.t .. ok
t/03.github-issue-5.t ..... ok
t/04.readonly-dir.t ....... ok
t/05.legacy-pathmk_unc.t .. skipped: Test irrelevant on non-windows OSs
All tests successful.
Files=6, Tests=158,  2 wallclock secs ( 0.05 usr  0.05 sys +  0.92 cusr  1.26 csys =  2.28 CPU)
Result: PASS
Manifying 1 pod document
Appending installation info to /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/File/Copy/Recursive.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/File::Copy::Recursive.3
-> OK
Successfully installed File-Copy-Recursive-0.44
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/File-Copy-Recursive-0.44/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/File-Copy-Recursive-0.44/MYMETA.json
Already tried YAML::XS. Skipping.
Searching Parse::RecDescent (1.967009) on cpanmetadb ...
--> Working on Parse::RecDescent
Fetching http://www.cpan.org/authors/id/J/JT/JTBRAUN/Parse-RecDescent-1.967015.tar.gz
-> OK
Unpacking Parse-RecDescent-1.967015.tar.gz
Entering Parse-RecDescent-1.967015
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.34)
Configuring Parse-RecDescent-1.967015
Running Build.PL
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'Parse-RecDescent' version '1.967015'
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Text::Balanced 1.95 ... Yes (2.03)
Checking if you have Test::More 0 ... Yes (1.302162)
Building and testing Parse-RecDescent-1.967015
Building Parse-RecDescent
# Testing Parse::RecDescent 1.967015
t/00.load.t ............... ok
t/01.basics.t ............. ok
t/autotree.t .............. ok
t/leftop_cap.t ............ ok
t/pod.t ................... skipped: Test::Pod 1.14 required for testing POD
t/precompile.t ............ ok
t/re_capture_return.t ..... ok
t/reentry.t ............... ok
t/reproducible.t .......... ok
t/separated_repetition.t .. ok
t/skip.t .................. ok
t/skip_dynamic.t .......... ok
t/text.t .................. ok
All tests successful.
Files=13, Tests=138,  2 wallclock secs ( 0.10 usr  0.09 sys +  2.15 cusr  0.42 csys =  2.76 CPU)
Result: PASS
Building Parse-RecDescent
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Parse/RecDescent.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Parse::RecDescent.3
-> OK
Successfully installed Parse-RecDescent-1.967015
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Parse-RecDescent-1.967015/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Parse-RecDescent-1.967015/MYMETA.json
Searching Inline (0.83) on cpanmetadb ...
--> Working on Inline
Fetching http://www.cpan.org/authors/id/T/TI/TINITA/Inline-0.83.tar.gz
-> OK
Unpacking Inline-0.83.tar.gz
Entering Inline-0.83
Checking configure dependencies from META.json
Checking if you have ExtUtils::MakeMaker 6.58 ... Yes (7.34)
Configuring Inline-0.83
Running Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Inline
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have Test::Warn 0.23 ... Yes (0.36)
Checking if you have ExtUtils::MakeMaker 0 ... Yes (7.34)
Checking if you have Test::More 0.88 ... Yes (1.302162)
Checking if you have Digest::MD5 0 ... Yes (2.55)
Checking if you have version 0.82 ... Yes (0.9924)
Checking if you have File::Spec 0.8 ... Yes (3.78)
Building and testing Inline-0.83
cp lib/Inline/Foo.pm blib/lib/Inline/Foo.pm
cp lib/Inline/API.pod blib/lib/Inline/API.pod
cp lib/Inline/FAQ.pod blib/lib/Inline/FAQ.pod
cp lib/Inline/MakeMaker.pm blib/lib/Inline/MakeMaker.pm
cp lib/Inline/denter.pm blib/lib/Inline/denter.pm
cp lib/Inline.pod blib/lib/Inline.pod
cp lib/Inline/MakeMaker/Changes blib/lib/Inline/MakeMaker/Changes
cp lib/Inline/Support.pod blib/lib/Inline/Support.pod
cp lib/Inline.pm blib/lib/Inline.pm
Manifying 4 pod documents
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t .. ok
t/01usages.t ............. ok
t/02config.t ............. ok
t/03errors.t ............. ok
t/04create.t ............. ok
Skipping - couldn't load the Inline::Files module
t/05files.t .............. ok
t/06rewrite_config.t ..... ok
t/07rewrite2_config.t .... ok
t/08unicode.t ............ ok
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
All tests successful.
Files=10, Tests=26,  3 wallclock secs ( 0.08 usr  0.06 sys +  2.32 cusr  0.51 csys =  2.97 CPU)
Result: PASS
Manifying 4 pod documents
Appending installation info to /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/Foo.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/API.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/FAQ.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/MakeMaker.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/denter.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/Support.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/MakeMaker/Changes
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Inline.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Inline::API.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Inline::FAQ.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Inline::Support.3
-> OK
Successfully installed Inline-0.83
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Inline-0.83/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Inline-0.83/MYMETA.json
Building and testing Inline-C-0.81
cp lib/Inline/C/Parser.pm blib/lib/Inline/C/Parser.pm
cp lib/Inline/C.pod blib/lib/Inline/C.pod
cp lib/Inline/C/Parser/Pegex/AST.pm blib/lib/Inline/C/Parser/Pegex/AST.pm
cp lib/Inline/C/Parser/RecDescent.pm blib/lib/Inline/C/Parser/RecDescent.pm
cp lib/Inline/C/ParsePegex.pod blib/lib/Inline/C/ParsePegex.pod
cp lib/Inline/C.pm blib/lib/Inline/C.pm
cp lib/Inline/C/Parser/RegExp.pm blib/lib/Inline/C/Parser/RegExp.pm
cp lib/Inline/C/ParseRegExp.pod blib/lib/Inline/C/ParseRegExp.pod
cp lib/Inline/C/Parser/Pegex.pm blib/lib/Inline/C/Parser/Pegex.pm
cp lib/Inline/C/ParseRecDescent.pod blib/lib/Inline/C/ParseRecDescent.pod
cp lib/Inline/C/Cookbook.pod blib/lib/Inline/C/Cookbook.pod
cp lib/Inline/C/Parser/Pegex/Grammar.pm blib/lib/Inline/C/Parser/Pegex/Grammar.pm
cp share/inline-c.pgx blib/lib/auto/share/dist/Inline-C/inline-c.pgx
Manifying 5 pod documents
Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
PERL_DL_NONLAZY=1 "/home/linuxbrew/.linuxbrew/Cellar/perl/5.30.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t ............ ok
t/01syntax.t ....................... ok
t/02config.t ....................... ok
t/03typemap.t ...................... ok
t/04perlapi.t ...................... ok
t/05xsmode.t ....................... ok
t/06parseregexp.t .................. ok
t/07typemap_multi.t ................ ok
t/08taint.t ........................ ok
This test could take a couple of minutes to run
t/09parser.t ....................... ok
t/10callback.t ..................... ok
t/11default_readonly.t ............. ok
t/14void_arg.t ..................... ok
t/14void_arg_PRD.t ................. ok
t/15ccflags.t ...................... ok
t/16ccflagsex.t .................... ok
t/17prehead.t ...................... ok
t/18quote_space.t .................. ok
t/19INC.t .......................... ok
t/20eval.t ......................... ok
t/21read_DATA.t .................... ok
t/22read_DATA_2.t .................. ok
t/23validate.t ..................... ok
t/24prefix.t ....................... ok
t/25proto.t ........................ ok
t/26fork.t ......................... ok
t/27inline_maker.t ................. ok
t/28autowrap.t ..................... ok
t/29refargs.t ...................... ok
t/30cppflags.t ..................... ok
t/31include_dirs_angle_brackets.t .. ok
t/32include_dirs_double_quotes.t ... ok
t/33intended_double_quotes.t ....... ok
t/author-pod-syntax.t .............. skipped: these tests are for testing by the author
t/parse-pegex.t .................... ok
t/pegex-parser.t ................... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set
All tests successful.

Test Summary Report
-------------------
t/parse-pegex.t                  (Wstat: 0 Tests: 24 Failed: 0)
  TODO passed:   4, 7-9
Files=36, Tests=161, 81 wallclock secs ( 0.23 usr  0.20 sys + 55.63 cusr 26.13 csys = 82.19 CPU)
Result: PASS
Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
Manifying 5 pod documents
Appending installation info to /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C/Parser.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C/ParsePegex.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C/ParseRegExp.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C/ParseRecDescent.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C/Cookbook.pod
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C/Parser/RecDescent.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C/Parser/RegExp.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C/Parser/Pegex.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C/Parser/Pegex/AST.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/Inline/C/Parser/Pegex/Grammar.pm
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/auto/share/dist/Inline-C/inline-c.pgx
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Inline::C.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Inline::C::Cookbook.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Inline::C::ParsePegex.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Inline::C::ParseRecDescent.3
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/man/man3/Inline::C::ParseRegExp.3
-> OK
Successfully installed Inline-C-0.81
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Inline-C-0.81/install.json
Installing /home/linuxbrew/.linuxbrew/Cellar/maker/2.31.10_1/perl5/lib/perl5/x86_64-linux-thread-multi/.meta/Inline-C-0.81/MYMETA.json
13 distributions installed